|
HF Automatic Antenna Tuner
Tune in your HF marine world
Suitable for many vessels
The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
Automatic tuning
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.
Weather resistant
The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers
Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Quick tune-up
Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes.
Low power tune-up
The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
Specifications
Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
Weight: 2.7 kg; 6.0 lb
Usable Temperature Range: -30C ~ +60C
Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
Current Drain (at 13.6 V DC): 2 A
Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
Input Impedance: 50 ohms (unbalanced)
Max. Input Power: 150 W (PEP)
Input Power During Tuning: 10 W
Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
Auto Tuning Accuracy: VSWR 2.0:1
Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)
|
550.18 |
|
|
Tuner for M802 & M803
When connected to the M802 or M803, the AT-140 automatically bypasses e-mail and shortwave listening, the AT-140 allows use of the entire antenna for best reception. Get fast frequency access without missing communication opportunities! The AT-140 comes ready for simple antenna cable and power connections. Install the unit near the antenna element base.
Features:
Completely weather-resistant acrylic case with rubber gaskets
45 memories for shorter tuning times
Quick Low power tune-up
Pre-wired cable connection points, just plug and play
Dimensions: 230 (w) x 340 (H) x 80 (D) mm
Antenna connector: SO-239
Max. Input Power: 150 W (PEP) 100 W (continuous)
Automatic tuning time: Approx 2-3 seconds
|
570.25 |
|
|
APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 3.5/4.5 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
2-Piece Antenna Collar f/1.5" Antennas
Replace your Rupp antenna collar without removing your antenna! Made of high-impact Delrin, these 2-piece clamp-on antenna collars are perfect for new or existing installations. Only available for antennas with a diameter of 1.50".
|
12.00 |
|
|
APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar Mounts
Central light bar for all forward learning PowerTowers®
Compatible with:
Scanstrut forward leaning PowerTower® radar mounts
Features:
All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required
Cables run internally via a watertight seal
Technical Specifications:
Material - 316 Stainless Steel
Height - 25.4" (404mm)
Mount Position - Center
In the Box:
Light bar
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS
Shakespeare Style 390 SSB
23' LENGTH
WHIP ANTENNA WITH CONDUCTORS RUNNING FULL-LENGTH (NO LOADING COIL)
This award-winning performer is often referred to as "the standard of the industry" by virtue of its capabilities and popularity. Reinforced insulating qualities allow input power up to 1 kw. Conductors are permanently sealed in Shakespeare white fiberglass.
Chrome-plated brass ferrules, bottom ferrule has 1"-14 thread
Side feed termination band
Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit for deck or side mounting
Two sections: Base 162"; Tip 112"
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
2-30 MHz HF band with tuner
Bandwidth:
Resonant frequency 10.8 MHz
SWR:
N/A
Impedance:
(Ohms): N/A
Gain:
N/A
Max Input (Watts):
1000
DC Ground:
N/A
Termination:
Side Termination
Height (feet):
23
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
259.96 |
|
|
Shakespeare Style 393 SSB
23' LENGTH
WHIP ANTENNA WITH CONDUCTORS RUNNING FULL-LENGTH (NO LOADING COIL)
The Style 393 antenna is electrically the same as the industry standard Style 390, For use in calm to moderate seas.
Chrome-plated brass ferrules, bottom ferrule has 1"-14 thread
Side feed termination band
Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit for deck or side mounting
Three sections: Base 92"; Center 92"; Tip 92"
Shakespeare Limited Warranty: 2 years
Technical Specifications:
Frequency:
2-30 MHz HF band with tuner
Bandwidth:
Resonant frequency 10.8 MHz
SWR:
N/A
Impedance:
(Ohms): N/A
Gain:
N/A
Max Input (Watts):
1000
DC Ground:
N/A
Termination:
Side Termination
Height (feet):
23
Polarization:
Vertical
Radiation pattern:
Omni-directional
|
386.84 |
|
|
Replacement VHF Antenna
VHF Flexible (Whip) Antenna (146-174 Mhz)
Height: 6"
Works with most Icom VHF two way radios
|
12.60 |
|
|
GPS Antenna Replacement for MA-510TR
The GPS receiver with the SBAS function is integrated into the MA-510TR. Position information can be simply received with a connection to this GPS antenna.
Features:
Supplied with a 32.8' (10M) cable
|
70.91 |
|
|
Lithium Battery Pack
Features:
High Capacity Lithium battery pack
Non-rechargeable 9.0V/3300 mAh
Made specifically for Icom's GM1600 and GM1600K
|
229.14 |
|
|
UX251 AIS Receiver Unit for M605
Icom's UX251 AIS Receiver Unit is already installed, depending on the version.
|
229.14 |
|
|
Compact Waterproof Speaker Mic for M85
Features:
Compact size mic with speaker and waterproof feature
No audio accessory jack
Long coiled cord
Durable 14-pin radio plug
Lightweight, comfortable and non slippery housing
Fully compatible with Icom's M85 marine handheld two-way radio
|
107.03 |
|
|
BP-291 Battery Case for M85 5 x AA
Features:
Holds 5 AA Batteries
IP54 RAted
For Icom M85
|
47.70 |
|
|
HM184H Waterproof Speaker Mic for M85
Features:
Waterproof Remote Speaker Microphone
14-Pin
Large PTT Button
Compatible with Icom's M85
|
100.80 |
|