|
Micro Cam-Matic Aluminum Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes 468 Cam-Matic® and 475 wire fairlead.
Specifications:
Weight: 33g / 1.2oz
Maximum working load: 91kg / 200lb
|
35.28 |
|
|
Micro Cam-Matic Aluminum Cleat
Harken® ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
Specifications:
Height: 22mm / 7/8in.
Length: 48mm / 1-7/8in.
Width: 24mm / 15/16in.
Weight: 26g / .93oz
Minimum line: 2mm / 3/32in
Maximum line: 6mm / 1/4in.
Fastener spacing: 27mm / 1-1/16in.
Fasteners: 4 RH mm / #8 RH in.
Maximum working load: 91kg/ 200lb
Breaking load: 181kg / 400lb
Pawls: Aluminum
|
28.42 |
|
|
Micro Carbo-Cam Cleat Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat.
Kit includes lightweight, fiber-reinforced 471 Carbo Cam, and 475 wire fairlead.
Specifications:
Weight: 26g / 0.9oz
Maximum working load: 68kg / 150lb
|
31.84 |
|
|
Standard Cam-Matic® Aluminum Cleat
Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications.
Specifications:
Height: 30 mm / 1-3/16 in
Length: 65 mm / 2-9/16 in
Width: 32 mm / 1-1/4 in
Weight: 71 g / 2.5 oz
Minimum line: 3 mm / 1/8 in
Maximum line:12 mm / 1/2 in
Fastener spacing: 38 mm / 1-1/2 in
Fasteners: 5 FH mm / 10 FH in
Maximum working load: 136 kg / 300 lb
Breaking load: 340 kg / 750 lb
Pawls: Aluminum
|
34.75 |
|
|
Standard Cam-Matic® Aluminum Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes hardcoat-anodized 150 aluminum Cam-Matic® and 298 wire fairlead.
Specifications:
Weight: 85g / 3 oz.
Maximum working load: 136kg / 300lb.
|
44.35 |
|
|
Standard Carbo-Cam® Kit with Wire Fairlead
Wire fairleads maintain a low profile while holding the line close to the cleat. Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead.
Specifications:
Weight: 54g / 2 oz.
Maximum working load: 91kg / 200lb.
|
37.06 |
|
|
40mm Carbo Air Pivoting Lead Block with Aluminum Cam-Matic® Cleat
High-strength pivoting lead blocks with cams are used for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting directly from the boom. Hole spacing and rivet size are the same as Classic models, making upgrades easy. Cam reverses for either up or down cleating.
Can be used as becket block.
Specifications:
Sheave Ø (mm)40 mm
Sheave Ø (in)1 9/16 in
Maximum line Ø (mm)10 mm
Maximum line Ø (in)3/8 in
Maximum working load (kg)136 kg
Maximum working load (lb)300 lb
|
68.56 |
|
|
Wire Fairlead with Base for 70-17 Cam Cleat
Wire Cam Fairlead with Base. Works with 70-17 Cam cleat.
Does NOT include 70-17 Cam Cleat
|
9.59 |
|
|
4MP H.265 AI IP Dome Camera with IR - 2.8mm Fixed Lens & Junction Box
Features:
Supports up to 4MP @ 30fps
Built-in standard PoE (IEEE 802.3af)
H.265/H.264/MJPEG compression supported
True Day/Night operation (IR cut filter)
Adaptive IR LEDs reduce IR saturation
IR range: Up to 98FT (depending on scene reflection)
Micro SD slot up to 256GB (card not included)
True WDR (wide dynamic range) operation
IP67 compliant, weather resistant
IK10 compliant, vandal resistant
Junction box included (works with NPT/BSP specifications)
Conformant with ONVIF Profile T
5-year warranty
UL Listed
NDAA Compliant
Technical Specifications:
Power - DC Jack
Maximum Resolution - 2592 x 1520
Field of View - 95.3°(H) , 53.2°(V), 115°(D)
White Balance - Auto, Indoor, Outdoor, Manual
Operating Temperature - -40°F 140°F
Unit Dimensions - 4.7” (Dia.) x 3.5” (H)
Unit Weight - 1.43 lb
|
307.50 |
|
|
Anchor Cleat Kit
The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Installation instructions and hardware are included
1-year warranty
Specifications:
Length: 4 inches
|
5.60 |
|
|
Zig Zag Cleat Kit
This YakGear Zig Zag Cleat Kit comes with a 3-1/2-inch nylon zigzag cleat for kayaks, canoes, and small boats. The zigzag cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Zig-zag cleats require no knots to be tied, as the pressure from the lace-back design keeps all anchors in place using up to 3/8-inch rope.
As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.
Features:
Lace back design allows all anchors to stay in place using up to 3/8 in. rope
Installation instructions and hardware are included
1-year warranty
Specifications:
Zig Zag Cleat Size: 3-1/2 in.
|
7.20 |
|
|
Micropump GB-P23.PVS.AM1 Pump W/Pps Gear Vit Static
|
1422.01 |
|
|
2-Position SPST Push-Pull Switch w/Wire Leads - OFF/ON
Single pole, single throw switch turns one circuit on and off. Heavy-duty, noncorrosive construction with moisture-repellent insulators. Brass case, stem, terminals and mounting hardware. Plasticized body helps seal out moisture and dirt. All knobs are screw-on type.
Features:
Nominal voltage is 6-36V DC
Rated for 10A at 12V DC
Two 8" 16 AWG wire leads for terminals
Fits panels up to 5/8" thick
Same as Cole Hersee part number M-606
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.32 |
|
|
Electronic Dimmer Switch w/Wire Leads - 7A @ 12V DC
Controls incandescent light intensity from dim to bright. Not meant for LED lights.
Features:
Nominal voltage is 12V DC
Rated for 7A at 12V DC
2" 16 AWG wire lead terminals
7/16" mounting hole, fits panels 1/4" thick
Connections: Red (Battery) and White (Load)
Same as Cole Hersee part number 74601-01
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.06 |
|
|
Yamada 1" Strainer W/Wire Mesh
|
55.25 |
|