140 Kayak/SUP Transducer Mounting Arm f/Post Mounts Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty post mount that fi ts into any Scotty Rod Holder mount. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

141 Kayak/SUP Transducer Mounting Arm w/438 Gear-Head Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty the 141 Track Adapter Mount that will allow you to install one of the Scotty Fishfinder mounts. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Stainless Steel Mounting Bracket f/Side Mount Table Pedestal Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength. Features: Polished stainless steel pedestal & table support Anodized aluminum bracket Locking pull pin offers added mounting strength Removable 125° bent leg Dimensions: 4-7/8"W x 4"H x 1/2"D Screw: #10 flat head / 1/4" hole. Benefits: Eliminates the need for mounting holes in boat deck and/or cockpit Easy to remove when not in use, for clear passage and storage Quick set-up and removal in tight spaces Increased leg & foot room

Drink Holder Drink holder with bulkhead/gunnel mount and rod holder post mount For cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RAM 5 Place Rod Mounting Base w/Post Get the most out of the space available on your kayak or boat with the RAM Five Spot Mount. With five locations to use for anything from rod holders to GPS to your fishfinder, this simple product provides unsurpassed versatility. Attach directly to the vessel or use the adaptor to securely mount to your current rod holder mounting bases. Ideally suited to a day on the water, there is even a place to store tools and fishing tackle. Dimensions: Length: 18.375" Width: 3.625" Material: High Strength Composite

Second Station Mounting Kit f/echoMAP™ 70dv/70s, GPSMAP® 741/741xs Mount any additional echoMAP™ or GPSMAP® on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Removable Rail Mounted Kayak/SUP Rack - Wide - 20" No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: 20" (50.8 cm) Wide rack arms can now hold up to 3 standard SUP's Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 10.4 lbs (4.72 kg) *Sold as a Pair

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Removable Rail Mounted Kayak/SUP Rack - 17.5" No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 9.4 lbs (4.27 kg) *Sold as a Pair

Removable Rail Mounted Kayak/SUP Rack - 17.5"  *Case of 3* No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 9.4 lbs (4.27 kg) per pair *Sold as a Case Pack of three (3) Pairs

159 1" Ball with Post Mount Adapt your Scotty post mount to our 1″ ball mounting system. For use with all Scotty post mounts.  Features: 1" Ball with Post

169 1-1/2" Ball with Post Mount Adapt your Scotty post mount to our 1.5″ ball mounting system. For use with all Scotty post mounts.

Current Transducer w/Cable f/DCM100 - 200 Amp The Maretron LEMHTA200-S is a current transducer for the Maretron DCM100. Features 200 amps Includes cable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

4M Transducer Extension Cable f/CHIRP & DownVision™ Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100.

Linkage Arm f/Merc 9.9HP, 4 Stroke - Starboard Side Option f/Type R System Features: Linkage Arm Specifically for Merc 9.9HP 4 Stroke - Starboard Side Option for Type R System