|
Headhunter MACH 5 230 volt 60hz Freshwater Pump
The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps. An integrated control system provides instant dry run protection, and allows the pumps to be used with or without a pressure accumulator tank. The Mach 5 pump incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel on top of the pump provides visual indication of alarm status, as well as reset capability.
Product Details/ Specifications:
Liquid Temp. 32°F To 104°F
Ambient Temp. 32°F To 122°F
Max Pressure 67 PSI (4.5bar)
Max Flow 20 GPM (76 lpm)
Suction/Discharge 1” MPT (1”GAS)
Noise Level <54 dB(A)
Weight 23lbs (10.4 kg)
Dimensions 18”(457mm)L-8 5/8”(219mm)W-13 ¼”(337mm)H
The Mach 5 has been tested and certified to surpass all requirements of Underwriters Laboratories UL 778 specifications for Motor Operated Pumps. The Mach 5 is CE approved.
|
2127.24 |
|
|
Headhunter Mach 5 Freshwater Pump 115Volt
The Mach5 water pressure system from Headhunter represents a next quantum leap in pump technology with many advanced features and improvements over conventional water pressure pumps. An integrated control system provides instant dry run protection, and allows the pumps to be used with or without a pressure accumulator tank. The Mach 5 pump incorporates a state-of-the-art multistage impeller system driven by a super-efficient water-cooled motor to generate up to 20 gallons per minute, instantaneously, on demand, and in virtual silence. An easy to read control panel on top of the pump provides visual indication of alarm status, as well as reset capability.
Product Details/ Specifications:
Liquid Temp. 32°F To 104°F
Ambient Temp. 32°F To 122°F
Max Pressure 67 PSI (4.5bar)
Max Flow 20 GPM (76 lpm)
Suction/Discharge 1” MPT (1”GAS)
Noise Level <54 dB(A)
Weight 23lbs (10.4 kg)
Dimensions 18”(457mm)L-8 5/8”(219mm)W-13 ¼”(337mm)H
The Mach 5 has been tested and certified to surpass all requirements of Underwriters Laboratories UL 778 specifications for Motor Operated Pumps. The Mach 5 is CE approved.
|
2127.24 |
|
|
Gianneschi ECOINOX-2-CE-230/60 Water System 230V 60Hz
This unit comes with the Control Press S3
|
1240.01 |
|
|
March TE-5.5C-MD Mag-Drive Centrifugal Pump single phase with 115/230V Motor
Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
864.90 |
|
|
Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower air cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
The TE-5.5C-MD pumps Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
872.10 |
|
|
March TE-5.5C-MD 1 Phase Mag Drive Pump with Explosion Proof Motor
Applications for the TE-5.5C-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-5.5C-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-5.5C-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
Motor Options
Explosion Proof
|
2061.00 |
|
|
Gianneschi ACB331-230V Bronze 230V 1Ph 50/60Hz
Main pump features:
Outstanding self-priming
Side channel and liquid ring construction
Simple and compact
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Washing
Fire-fighting
S.W feeding
WPS - Hydrofore
Port Size: From 1'' 1/4 to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
4321.65 |
|
|
Little Giant Pump 582514
Little Giant TE-4-MD-SC 230V w/cd Magnetic Drive Pump
Motor 230 Volt 50/60 Hz 1/10 HP Totally Enclosed Fan Cooled Motor, 850 GPH at 1 Foot Head, Shutoff Head 24.3 Feet, Inlet: 1" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord- No Plug
582514 Magnetically driven pumps for semi-corrosive chemicals and solutions. The MD-SC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
594.75 |
|
|
Applications for the TE-5.5K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
The TE-5.5K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.. The TE-5.5K-MD may have been modified to handle these chemicals.
March Pump's industrial TE-5.5K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-5.5K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
Carbon Filled Kynar (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers)
|
964.80 |
|
|
March TE-5.5S-MD Mag Drive Pump 115 volts
Applications for the March TE-5.5S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
The March TE-5.5S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-5.5S-MD may have been modified to handle these chemicals.
March Pump's industrial TE-5.5S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 0.75 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5.5S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
30 GPM
102 LPM
Max Head
41 FT
9 M
Power
.33 HP
.248 KW
Electrical
1PH 115/230V 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1"FPT
Outlet
3/4"MPT
Wet End
316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
|
2875.58 |
|
|
Gianneschi MV44G-230/400/50 Single Screw Pump
Gianneschi MV44G-230V, MVG Series Single Screw Pump and Motor unit, Bronze construction, Buna Nitrile Stator, Stainless Steel Screw Rotor impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 230 volts AC, 50/60 Hz, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the MV44G230V include emptying of Heavy Liquid Tanks Black And Grey Water, Emptying of waste, liquid with small suspended parts. This is a simple pump that consists of a stainless steel rotor screw that turns through a rubber stator and pushes liquid along.
|
1960.40 |
|
|
Gianneschi ECO-MV44G-230V Bronze Screw Pump 1Ph 230V 50Hz
Gianneschi ECO-MV44G-230V, MVG Series Single Screw Pump and Motor unit, Bronze construction, Buna Nitrile Stator, Stainless Steel Screw Rotor impeller, 316 Stainless Steel Shaft. Motor is 0.55 KW (0.75 Horsepower), 230 volts AC, 50/60 Hz, Single Phase. Inlet Port is 1 Inch BSP Inlet, Discharge Port is 1 Inch BSP Outlet.
Applications for the ECOMV44G230V include emptying of Heavy Liquid Tanks Black And Grey Water, Emptying of waste, liquid with small suspended parts. This is a relatively simple pump that consists of a stainless steel rotor screw that turns through a rubber stator and pushes liquid along.
|
2461.00 |
|
|
March LC-2CP-MD Mag Drive Pump 230V
The most common application for the LC-2CP-MD Magnetic Drive Pump is for marine air conditioning and fountains. This pump will handle up to a 6,000 BTU Air Conditioner.
March Pump's industrial LC-2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (or around 5.5PSI). The LC-2CP-MD pump may be used submerged or not submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread and 0.75 inch male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.028 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 25PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March LC-2CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals.
Unit System 60Hz 50Hz Max Flow
5 GPM
18.5 LPM
Max Head
13 FT
2.7 M
Power
.028 HP
.021 KW
Electrical
115V 50/60HZ or 230V 50/60HZ
Submersible
Yes
Type
Centrifugal Mag Drive
Inlet
3/8"FPT & 3/4"MPT
Outlet
1/4"MPT
Wet End
Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Stainless Steel (Shaft, Cooling Tube), Ceramic (Thrust Washer), Ceramic Magnet
Uses
Submersible or Open Air
When submerged, the following is also in contact with the solution
Epoxy, Buna N, Cord
|
459.38 |
|
|
Jabsco 53081-2003-230 Pump 1.5 230V Util 80
|
1527.22 |
|
|
Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT Female
Outlet: 1/2" NPT Female and 3/4" NPT Male
Flow:
Up To 24 GPM Maximum
Pressure:
Up To 23 PSI, 53 feet of head
Impeller:
Bronze Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available.
Shaft:
416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use
Motor:
1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
|
1088.10 |
|