FishTrax™ Display Mounting Disc The TraxMount Suction Cup Mounting Disk is an adhesive pad disc that allows you to stick it to any surface and attach any FishTrax or TraxMount accessory that incorporates a suction cup.   No tools are required to install - simply clean the surface and stick to the surface using the strong adhesive base.  Compatible with: TraxMount suction cup display mount FishTrax™ suction cup transducer mount FishTrax™ IceShack enclosure In the Box: Suction Cup Mounting Disk 3M® Adhesive Backing *Sold as an Individual

FishTrax™ Adjustable Mounting Bracket with Suction Cup Utilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe.  Combine it with a TraxMount Weighted Display Mount Pad or TraxMount Mounting Disk to maximize usability. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual

FishTrax™ Strap Mount Attaches any FishTrax Fish Finder and transducer to a float tube, kayak or canoe.   Integrated adjustable strap with quick release buckle, allows for easy installation and removal. It can also be used to attach a GoPro Camera or any Camera with a female 1/4 x 20 thread pattern.  The strap mount is adjustable to 48" so it can also be mounted on kayaks and canoes as well.    Compatible with: FishTrax™ 1, 1X and 1C fish finders   In the Box: FishTrax Strap Mount TraxNut Display Mount Adjustable Strap (48') with Quick Release Buckle Transducer Mount Thumb Screw Hardware *Sold as an Individual 

FishTrax™ Transducer Mount The FishTrax transducer mount provides a universal transducer mounting option for sup's, paddleboards, kayaks canoes and small boats.   This solution enables the quick and effective mounting and removal of your transducer.  Compatible with: FishTrax 1 FishTrax 1X FishTrax 1C In the Box: ABS Plastic Transducer Mount Stainless Steel Bolt and Wing Nut Instruction manual  *Sold as an Individual

FishTrax™ Transom Mount Transducer  The FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the box: Transom mount transducer w/30' cable  Transom mount bracket w/mounting hardware Instruction manual *Sold as an Individual 

FishTrax™ Weighted Display Mounting Pad The weighted display mounting pad keeps your fish finder securely in place.  The heavyweight base has a non-slip, anti-skid surface, so there’s no movement. To attach it to your FishTrax™ fish finder combine it with a TraxMount™ Suction Cup Mount. Compatible with:  FishTrax™ 1, 1X and 1C fish finders TraxMount™ Suction Cup Mount. FishTrax IceShack In the Box: Weighted Display Pad w/integrated Disc for Suction Cup Mounting *Sold as an Individual   

TraxMount™ Paddlesport Mount TheTraxMount™ Paddlesport Mount is designed for use in kayaks, canoes, and small boats. Its high strength and corrosion-resistant composite materials can take the punishment of the water and will give you years of faithful service. It's compact and convenient, telescoping from 11.5" to a full 18" ensures that you will be able to take it on every adventure.    Compatible With: HawkEye® FishTrax™ Series HawkEye® FishPod® 5X What's Included? ABS Plastic Transducer Arm Locking Combination Side/Deck Mount Slip Discs for Micro Adjustments. Mounting Hardware *FishTrax 1C Fishfinder  or FishPod Not Included * FishPod Phone Holder Not Included

Bendable Suction Cup Base Mount with Mounting Disc Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Examples of Usage: Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at: The outboard engine The steering console, the windshield or any place on the hull where the lights are seen best On canoes and kayaks with a smooth and flat surface Specifications: Secure suction cup base Quick release suction cap Bendable shaft moves through 180° Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces Size: L = 68mm, H = 157mm Weight (net): 80g

FishTrax™ 1C Fish Finder w/HD Color Display Introducing the world’s most versatile fish finder.  This powerful, handheld unit uses SONAR technology to locate fish depth and measure water temperature & bottom contour.   Use it on a motorboat, kayak, or even on the ice in winter. Features: 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or a desired depth has been measured.  VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions (H x W x D)  6" x 3" x 2" (153 x 77 x 51mm) Screen Size (H x W) -  2" x 1.6" (50 x 40mm) Operating Temperature - 0 to 160°F  (-18 to 71 °c) Depth Range -  1.5' to 240 ft (.5 to 75 M) Transducer Cable Length - 15' (4.5 m) Transducer Frequency - Dual 200/83 kHz Transducer Beam Angle - Dual 14/26° Power - four (4) AAA Batteries In the Box: FishTrax™ 1C fish finder Transducer w/15' cable *Sold as an Individual 

FishTrax™ Compact Travel Case Black hard canvas travel case for the FishTrax™ fish finder display.  Shockproof, dustproof and water resistance. Compatible with:  FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C *Sold as an Individual

FishTrax™ Standard Transducer Have you lost, or damaged your standard FishTrax™ transducer?  This kit will get you back on the water in no time.   Includes all standard hardware and is 100% compatible with all FishTrax™ Series fish finders.  Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: FishTrax™ transducer w/15' cable Velcro Cable Strap Rubber Float Stopper Closed-Cell Foam Float *Sold as an Individual

FishTrax™ Sidescan Transducer Adapter Scan for fish suspended in the water with our FishTrax™ Transducer SideScan™ Adapter.  It can attach to a standard ACME threaded broomstick or paint roller handle.  Incorporates mounting tabs for boats, kayaks, canoes, paddleboards, etc mounting of FishTrax™ transducers. Attach the sensor to a handle, lower the sensor into the water and slowly move the sensor in a manner that will allow the signal to search the desired location - scan down, sideways, or any combination of the two. Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: ABS Plastic SideScan Adapter  Integrated Mounting Tabs *Sold as an Individual

FishTrax™ Suction Cup Transducer Mounting Bracket The FishTrax™ Suction Cup Transducer Mount easily attaches the standard FishTrax™ transducer to any hull for optimal performance.  Click and go for easy installation and removal on any vessel.    *Transducer not included Compatible with: FishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C In the Box: Suction Cup with Lock Tab Stainless Steel Bolt & Thumb Nut Stainless Steel Lock Washers *Sold as an Individual

FishTrax™ 1C-K Paddlesport Fishfinder with Carrying Case This powerful, handheld fishfinder uses SONAR technology to locate the fish depth and measure water temperature & bottom contour. Use it on a motorboat, kayak, or even on the ice in winter. The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak.  Features: The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak. 2” HD Color Display Waterproof Housing Easy-to-use menu options and settings.  Designed by fishermen, for fishing enthusiasts of all experience levels. Powered by four (4) AAA Batteries Use automatic mode for quick and easy setup, or dial in precise readings with manual mode. Ice Mode Digital Flasher allows precise jig depth readings while ice fishing. Programmable audible alarms let you know when fish are present, or the desired depth has been measured. VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing. Polarized LCD for glare-free viewing Technical Specifications: Dimensions - 6" x 3" x 2" (153 x 77 x 51 mm) Screen Size (H x W) - 2" x 1.6" (50 x 40 mm)  Operating Temperature -  0 to 160°F (-18 to 71 °c)  Depth Range 1.5 ft 240 ft  (.5 to 75 m) Transducer Cable Length - 15 ft  (4.5 m) Transducer Frequency - Dual - 200/83 kHz Transducer Beam Angle - Dual - 14/26 Degree In the Box: 1C Handheld Fish Finder Mounting bracket Transducer w/15' cable  Mounting track with hardware Carrying case *Sold as a Kit

PowerPod Un-Cut (Usable Face = 18.36″W x 10.61″H) (46.6cm W x 26.9cm H)  PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability. NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure, or damage from getting snagged and ripped out of their sockets. All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up its commitment to quality by offering a 10-year warranty on all Gen3 NavPods. PowerPods: Protection, Convenience, Security.