|
FFL12 Floating Fish Light with 20' Cord - LED - 12W - 12V - White
The FFL12 Floating Fishing Light is perfect for small boats, kayaks, canoes and pier/dock fishing. It features durable Arcel foam for floating the light on the surface. The 4 energy efficient, 3 watt, Cree LEDs will emit a broad beam of light attracting bait and predator fish alike. Simply deploy the light on the waters surface with the light facing downward, connect the clips to any 12v power supply and start fishing. Features such as Energy efficient, durable and very bright will make this light a fishing necessity.
Features:
Body Material: Arcel EPS (USA) +Aluminum housing
Power Supply: 12vdc battery
Illumination: 4pc Energy Efficient 3w Cree(USA) LEDs
Cord length: 20 Feet with alligator clips
Colors: white, green,
Lumens: 900
Warranty: 1 year
Application: Surface floating
Conditions: Freshwater or Saltwater
|
33.00 |
|
|
FFL12 Floating Fish Light with 20' Cord - LED - 12W - 12V - Green
The FFL12 Floating Fishing Light is perfect for small boats, kayaks, canoes and pier/dock fishing. It features durable Arcel foam for floating the light on the surface. The 4 energy efficient, 3 watt, Cree LEDs will emit a broad beam of light attracting bait and predator fish alike. Simply deploy the light on the waters surface with the light facing downward, connect the clips to any 12v power supply and start fishing. Features such as Energy efficient, durable and very bright will make this light a fishing necessity.
Features:
Body Material: Arcel EPS (USA) +Aluminum housing
Power Supply: 12vdc battery
Illumination: 4pc Energy Efficient 3w Cree(USA) LEDs
Cord length: 20 Feet with alligator clips
Colors: white, green,
Lumens: 900
Warranty: 1 year
Application: Surface floating
Conditions: Freshwater or Saltwater
|
33.00 |
|
|
HYDRO GLOW LIGHTS
Hydro Glow Fishing Lights is the world's leader in high quality underwater fishing lights. Hydro Glow's off the boat series of fishing lights are 12 VDC, high output LED, virtually unbreakable and made to last. Hydro Glow's underwater fishing lights are easy to use and very effective. Simply lower the light off the side of the boat. When it submerges to the desired depth, just tie or clip the cord on a rail or cleat. Bait fish will be attracted by the underwater lights. Predator fish will usually be deep under the light and a short distance away feeding on the baitfish around the perimeter of the underwater light's glow.
|
|
|
LED Underwater Dock Light - 200W - 50' Cord - Green
The SF200 underwater dock light features the latest in LED design and technology. With over 120 lumens per watt the SF200 will maximize underwater illumination, promote energy efficiency and safe operation.
The SF200 is designed to be anchored to the bottom at the desired location, shining upward toward the surface. Each light comes with a 50’ cord. Extra lengths are optional.
The SF200 is perfect for creating great aesthetics around waterfront dining, marking channels or a great look throughout the marina or private dock.
|
420.00 |
|
|
Hydro Glow Fishing Lights manufactures high quality, energy efficient, waterproof lights for both above the water and underwater applications. Hydro Glow Fishing Lights utilize high output LEDs for great fish attracting capability.
S1 Ultra Thin Solar Deck Light
Proven Hurricane Tough
Body Material: High Impact Polycarbonate
Power Supply: USA made High Efficient Solar Panel
Battery: Lithium Ion 3.7v/340mah
LEDs: 6 USA made LEDs
Colors: White, Green, Blue & Red
Visual Distance: 500M
Working Temperature: -20C (-4F)
Life Expectancy: 5 Years
Waterproof: IP68 Totally Submersible
Size: 4.5" x 3.5" x .4"
SF100G/SF100B - Green & Blue SeaFloor Underwater Lights
The SeaFloor Series of underwater lights are our "anchored to the bottom" style lights. This means the light fixture floats so a weight is required to hold the light in the desired location and depth. The SF100G comes with a 50 foot cord, a 120v to 24v power supply to provide safe current to the light and an array of high output, green LEDs for maximum output and energy efficiency. The SF100G underwater light is designed to be deployed so the light fixture is floating about 3 feet below the surface. Because there are no special transformers, ballasts and other parts, there is no need for an electrician. Simply attach a small weight (about 2 pounds) on the cord, drop it in the water and plug it up.
Installation takes about 5 minutes. As with all our dock lights, we recommend turning off any other white lights on the dock. You will be amazed at the amount of fish you will see with the SF100G. Safe low voltage current, very bright and energy efficient best describes theh SF100G, a truely green product.
HG3216G - 4' Long 12VDC Green LED Fishing Light
The HG3216G underwater fishing light is made of deep water fishing. It is 48 inches long and designed to be deployed right off the side of the boat. When it submerges to the desired depth simply tie or clamp the cord to a rail or cleat. The HG3216G features 648, high-output, green LEDs, 20' cord, two amp draw, 4,000 lumen and is virtually unbreakable. The HG3216G underwater fishing light is perfect for deep ocean and deep lake fishing. It is commonly used for catching swordfish, tuna, squid, snapper, grouper and many species of bait. It is also a favorite for deep water freshwater fishing for striped bass, walleye, crappie and lake trout.
HG45 Premium Deep Water Fishing Light
HG45 is very compact, only 5" high and 3" in diamenter. It is easily stowed in a glove compartment. The design is for illumination on 4 sides horizontal as well as vertical. The HG45 is perfect for those overnight offshore trips as well as deep water inshore fishing. It comes with a 20' cord and alligator clips. If deepwater fishing is your thing then the HG45.
Specials Closeouts Remanufactured Rebates
|
|
|
Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - White Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
174.68 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - Black Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
|
174.68 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Red/White LED - White Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
|
174.68 |
|
|
Surface Strip Light w/Switch - White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
68.35 |
|
|
Surface Strip Light w/Switch - White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|
|
HYDRO 6.5" 2-Way Marine Speakers with RGB LED Lights 300W - White
The DS18 HYDRO All Elements Series is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products we have whatever you may need for your ATV, UTV, Side by Side, Jeep, Motorcycle, Boat, or anything in between. We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air.
The DS18 Hydro Motorsport and Marine Series rugged yet sleek design, provide its users with trouble free, waterproof (IP65), amazing sound quality. Engineered for all elements, these speakers/subwoofers are a great addition to your marine life and motorsports!
Also equipped with an integrated RGB LED Lighting, high temp injection molded composite, ASA Grills with UV coating or a high gloss basket with UV coating.
Compatible with DS18 LED-BTC ligthing controller.
Features:
Integrated RGB LED Lighting
IP65 Marine Grade Compliant Specifications
100% UV Stable
High Temp Injection Molded Composite
High Gloss Injection Molded Composite
ASA Grills with UV Coating
Technical Specifications:
Size - 6.5"
RMS Power - 125W
MAX Power - 375W
Magnet Type - Y35 Ferrite Main Magnet & Reverse Neodymium
Sensitivity - 91dB at 1 w/m
Normal Impedance - 4 Ohm
Frequency Response - 45Hz-23KHz
Mounting Depth - 2.25" (64mm)
Cut-Out Diameter - 5.39" (137mm)
Overall Diameter - 6.93" (176mm)
Overall Height - 3.7" (94mm)
Tweeter Size - 25mm Titanium Dome PEI Surround
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
191.94 |
|
|
High-Output Piling Mount Underwater Light with Intelligent Monochromatic LED's - White, 45° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-PMR1-W3-45 is a superior underwater White LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 45°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 10" (W) x 7" (H) x 2.87" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
1015.34 |
|
|
High-Output Piling Mount Underwater Light with Intelligent Monochromatic LED's - White, 90° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-PMR1-W3-90 is a superior underwater White LED luminaire with 90° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 90°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 10" (W) x 7" (H) x 2.87" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
1015.34 |
|
|
High-Output Surface Mount Underwater Light with Intelligent Monochromatic LED's - White, 45° Beam
The F-Series line of underwater marine lighting fixtures is designed to mounted a depth of up to 4.6M (15') below the water’s surface to provide vibrant White light in the water. With watertight aluminum bronze housings and silicon bronze hardware, Metro Marine’s F-Series luminaires are perfect for marine-based applications such as mounting to yachts, docks, sea walls, as well as for use in fountains and theme park installations. Leveraging Metro’s rich legacy of innovation and leadership in optics & LED control technology, the F-Series underwater lighting fixtures introduce a unique LED array to the market with 18 H.O. LEDs per fixture, allowing close adjacent fixture placement where fully-mixed, uniform light is important.
The F-SMR1-W3-45 is a superior underwater White LED luminaire with 45° optical lensing for lighting mid- to large-scale structures and yachts ranging from 10M (32') to 30M (100'), with uniform color control, and high efficiency.
Clear Lens Technology
One of the main problems seen with underwater marine lighting fixtures is the aggressive growth (biofouling) that attaches to the clear lenses in front of the LEDs. This growth blocks the light, and causes the fixtures to overheat. When UVC’s became available in LED form, Metro Marine devised and patented a unique and innovative system utilizing UVC LEDs to keep the lenses on our fixtures crystal clear – forever!
Anti-Condensation Assembly Methodology
Condensation is a critical issue found in many underwater marine lighting fixtures. It can cause internal corrosion which can destroy underwater lighting fixtures from the inside-out. Taking a scientific approach, we have solved this problem, completely eliminating condensation from forming in our fixtures. We manufacture our fixtures in a Class 1000 Clean Room, and our patent-pending assembly methodology guarantees our fixtures will never experience condensation!
Technical Specifications:
Beam Angle - 45°
Input Voltage - 10VDC-30VDC
Power Consumption - 44W
Dimensions - 7.53" (W) x 7.68" (H) x 2.349" (D)
Weight - 2.71 lbs
Lens Material - Clear Quartz
Operating Temperature - -40 to 122°
|
958.87 |
|