6 LED Cube Light - Flood Beam - 3" - 2 Pack Heise HE-DLWH1 Dual Light Wiring Harness Included Advanced thermal management- short circuit and open circuit protection and many other innovative features. Surface mount and flush mount LED cubes give you tons of options for every application you need. SPECS Input Voltage: 10-30V DC Power Consumption: 12W Each Pair (4-3W CREE LED) Lumen Flux: 900lm Each Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Cube Light - Flood Beam - 3" Advanced thermal management- short circuit and open circuit protection and many other innovative features Surface mount and flush mount LED cubes give you tons of options for every application you need SPECS Input Voltage: 10-30V DC Power Consumption: 18W (6-3W CREE LED) Lumen Flux: 1440lm Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" - 2 Pack Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blackout LED Cube Light - Flush Mount - 3" SPECS Input Voltage- 10-30V DC Wattage- 12W (4-3W CREE LED) Raw Lumens- 960 LUX at 10M- 17 Color Temperature- 6000K Beam Pattern- 90 degree Flood CONSTRUCTION Housing Material- Die-cast Aluminum Housing Housing Color- Black Lens Material- PC Mounting Bracket- Flush Mount Electronics- Integrated-Epoxy Encapsulated Hardware- Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature- -40 degree C to +60 degree C Current Consumption- .9 amps @ 13.8 volts IP Rating- IP68 Protections- Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Raw Lumens: 960 Each LUX @ 10M: 380 Color Temperature: 6000K Beam Pattern: 8° Spot CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Marine Cube Light - Flush Mount - 3" SPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W CREE LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Flush Mount Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature: -40degC to +60degC Current Consumption: 1.2 amps at Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3" 4 LED Cube Light - 2-Pack Specifications: Wattage: 13W Lumens: 1080 Lux @ 10M: 411 Color Temperature: 6000K Beam Pattern: Spot (8°) Construction: Housing Material: Die-Cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 Operation: Operating Temperature: -40°C to +60°C Current Consumption @ 13.8V: 0.9 A IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3" 4 LED Cube Light Specifications: Wattage: 13W Lumens: 1080 Lux @ 10M: 411 Color Temperature: 6000K Beam Pattern: Spot (8°) Construction: Housing Material: Die-Cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 Operation: Operating Temperature: -40°C to +60°C Current Consumption @ 13.8V: 0.9 A IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

H11 LED Headlight Kit - Single Beam - Pair HEISE LED replacement headlights are designed to replace weaker, factory bulbs with brighter, low current consuming LED bulbs.  These headlight kits are extremely bright, providing the additional light needed on dark nights.   Each kit has a pair of 25 watt LED bulbs.  The voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements.  Installation is easy, even in tight locations!  Heise headlights come in 21 different model sizes to fit an array of headlight applications and are the perfect upgrade for drivers wanting more out of their headlights.  Features: 6000 Lumens 25 Watts per bulb Compact radial heatsink for better heat dissipation – less depth of space and easy installs Voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements 6500K color spectrum with 3000K (golden yellow) and 8000K (light blue tint) films Rotatable bulb can adjust the beam pattern for the vehicle IP67 Rated Not for use on public roads *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

9006 LED Headlight Kit - Single Beam HEISE LED replacement headlights are designed to replace weaker, factory bulbs with brighter, low current consuming LED bulbs.  These headlight kits are extremely bright, providing the additional light needed on dark nights.   Each kit has a pair of 25 watt LED bulbs.  The voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements.  Installation is easy, even in tight locations!  Heise headlights come in 21 different model sizes to fit an array of headlight applications and are the perfect upgrade for drivers wanting more out of their headlights.  Features: 6000 Lumens 25 Watts per bulb Compact radial heatsink for better heat dissipation – less depth of space and easy installs Voltage and current monitoring circuits are inside the compact radial heatsink housing and protected from the elements 6500K color spectrum with 3000K (golden yellow) and 8000K (light blue tint) films Rotatable bulb can adjust the beam pattern for the vehicle IP67 Rated Not for use on public roads *Sold as a Pair WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Single Row Driving Light SPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W OSRAM LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 25deg Spot CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Black Powder Coated Steel Hole Dimensions: Mounting Bolt Drill – .25in Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9 amps at 13.8 volts IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Single Row Driving Light - Flush Mount SPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W OSRAM LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 25deg Spot CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 and includes a gasket and a cut-out template OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9 amps at 13.8 volts IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed. Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Auxiliary motorcycle lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0 Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual