|
DepthTrax 1H Handheld Depth Finder and Temperature Reader
The DepthTrax 1H is a powerful handheld depth finder that produces instant, accurate depth readings up to 300 feet and temperature readings accurate to within 1/10th of a degree. Fully waterproof and built to last, it’s the only handheld SONAR depth finder on the market.
Features:
Waterproof up to 200'
Depth reading from 2.5' to 300' (0.7-91.5M)
Read water or air temperature with up to 1/10th of a degree of accuracy
Shoot through the ice for accurate depth readings while ice fishing.
Backlit for nighttime viewing
Requires (1) 9V battery (not included)
Safety lanyard prevents accidental loss
Technical Specifications:
Dimensions - 2" x 2" x 8" (51 x 51 x 203mm)
Screen Size - 1.65" x .87" (42 x 22mm)
Operating Temperature - 0 to 160°F (-18 to 71 °c)
Depth Range - 2.5' to 300' (.7 to 90 m)
Waterproof Rating - IPX8 to 200 ft (60 m)
Battery - 9 Volt Alkaline (not included)
Battery Life - 25 Hours
Transducer Frequency - 200 kHz
Transducer Beam Angle -14°
In the Box:
Handheld depth finder & temperature reader
Wrist strap
Instruction manual
*Sold as an Individual
|
83.62 |
|
|
Mounting Bracket for DepthTrax Gauges
Surface mount bracket for all HawkEye boat mount depth and temperature gauges. Weather and impact resistant with a 360-degree swivel that can be mounted anywhere, at any angle.
Compatible with:
DepthTrax 2B and 2BX,
DepthTrax 1B and 1BX
D10D and D10DX
DF1000D and DF10000DX
1000-01 and 1000.01T
Features:
Easily installed
Weather and impact-resistant ABS plastic
Mounts on any flat surface
In the Box:
Surface mount bracket
Anti-vibration adhesive pad
*Sold as an Individual
|
15.73 |
|
|
FishTrax™ 1C-K Paddlesport Fishfinder with Carrying Case
This powerful, handheld fishfinder uses SONAR technology to locate the fish depth and measure water temperature & bottom contour. Use it on a motorboat, kayak, or even on the ice in winter. The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak.
Features:
The 1C-k kit comes with everything you need to easily mount the unit to a canoe or kayak.
2” HD Color Display
Waterproof Housing
Easy-to-use menu options and settings. Designed by fishermen, for fishing enthusiasts of all experience levels.
Powered by four (4) AAA Batteries
Use automatic mode for quick and easy setup, or dial in precise readings with manual mode.
Ice Mode Digital Flasher allows precise jig depth readings while ice fishing.
Programmable audible alarms let you know when fish are present, or the desired depth has been measured.
VariableZone Temperature Sensor measures water temperature throughout the water column for species pinpointing.
Polarized LCD for glare-free viewing
Technical Specifications:
Dimensions - 6" x 3" x 2" (153 x 77 x 51 mm)
Screen Size (H x W) - 2" x 1.6" (50 x 40 mm)
Operating Temperature - 0 to 160°F (-18 to 71 °c)
Depth Range 1.5 ft 240 ft (.5 to 75 m)
Transducer Cable Length - 15 ft (4.5 m)
Transducer Frequency - Dual - 200/83 kHz
Transducer Beam Angle - Dual - 14/26 Degree
In the Box:
1C Handheld Fish Finder
Mounting bracket
Transducer w/15' cable
Mounting track with hardware
Carrying case
*Sold as a Kit
|
185.99 |
|
|
Mareton DST110 Smart™ Retractable Depth/Speed/Temperature Transducer
The DST110 delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots - all with no programming or calibration necessary.
Its patented Smart™ Sensor Technology, retractable and removable sensor, and NMEA 2000® network connectivity make the DST110 easy to interpre, easy to install and connect with other navigation equipment, and easy to maintain.
The DST110 measures precise water depth at 0.4m to 100m with a wide beam width and is tolerant to most deadrise angles. It reads water temperature from -10°C to +40°C at ±1.0xC accuracy, and accurate speed from 1 to 50 knots. User customizable calibrations for speed and temperature indications for your installation. At 235kHz it can be used with a fishfinder as an ideal navigation tool for sport or commercial fishing vessels or with sailing vessels of all sizes.
The DST110's plastic, bronze, or stainless steel housing choices are compatible with any hull material. It includes a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling growth.
Maretron's DST110 is CE compliant (IEC 60945) and is manufactured to the highest quality standards under ISO9K/2K procedures. Its compact, waterproof housing will provide years of reliable performance, making it the Smart™ choice in marine sensing.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
479.04 |
|
|
Transom mount Triducer multisensor for speed, depth and temperature information.The hydrodynamic housing features a rounded nose which reduces the turbulance under the transducer's face for accurate high speed readings.
Features:
New square blade paddle-wheel improves linearity and is more accurate through the speed range
With adjustable tension bracket which kicks up on impact to protect the housing
Recessed waterflow channel protects paddle-wheel
|
234.98 |
|
|
DepthTrax In-Dash Digital Depth Gauge - Transom Mount
The DepthTrax 2B includes advanced sonar, depth alarm, and keel offset capabilities. With updated SONAR algorithms, the DepthTrax 2B reachs new depths. Able to reach depths of 600 ft and tuned for high speed performance, the DepthTrax 2B reaches deeper and performs faster than any depth finder.
The DepthTrax 2B delivers a combination of performance and affordability unrivaled in any other depth sounder.
Features:
Algorithmic programming significantly reduces false readings and produces unmatched precision
EasyTouch programming allows one-touch access to the user settings
User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements
Selectable Imperial or Metric readout
Dual Upper and Lower depth alarms can be set throughout the full depth range
3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting
Displays air & water temperature in °F or °C
Automatic memory retention of all user settings
Removable face system - includes White & Black faceplates and White/Black trim rings
No glare, polarized LCD icon display with storage sun cover
SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing
Technical Specifications:
Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm)
Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm)
Gauge Cut-out Size - 2"
Operating Temperature - 0 to 160° F (-18 to 71°C)
Depth Range - 2.5' to 600' (.7 to 180 M)
Transducer Type - Transom Mount
Transducer Frequency - 200kHz
Transducer Beam Angle - 14°
Transducer Cable Length - 30' (9 M)
Power Requirement - 12 - 14 VDC
In the Box:
Gauge
Bezel/Faceplate - Black and White
Display cover
Mounting hardware
Transducer - transom mount w/30' cable
Instruction manual
*Sold as an Individual
|
113.75 |
|
|
DepthTrax Dash Digital Depth and Temp Gauge - Thru-Hull
The DepthTrax 2BX includes all the advanced sonar, depth alarm, and keel offset capabilities of the DepthTrax 2B, but also integrates dual temperature displays and an AIRMAR®, ultra-sensitive, high-performance thru-hull transducer. With a simple press of a button on the DepthTrax 2BX display produces instant access to water or air temperature readings via integrated sensors in both the head unit and the transducer.
The DepthTrax 2BX delivers a combination of performance and affordability unrivaled in any other depth sounder.
Features:
Algorithmic programming significantly reduces false readings and produces unmatched precision
EasyTouch programming allows one-touch access to the user settings
User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements
Selectable Imperial or Metric readout
Dual Upper and Lower depth alarms can be set throughout the full depth range
3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting
Displays air & water temperature in °F or °C
Automatic memory retention of all user settings
Removable face system - includes White & Black faceplates and White/Black trim rings
No glare, polarized LCD icon display with storage sun cover
SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing
Technical Specifications:
Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm)
Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm)
Gauge Cut-out Size - 2"
Operating Temperature - 0 to 160° F (-18 to 71°C)
Depth Range - 2.5' to 600' (.7 to 180 M)
Transducer Type - Thru-Hull
Transducer Cut-out Size - 2"
Transducer Frequency - 200kHz
Transducer Beam Angle - 14°
Transducer Cable Length - 30' (9 M)
Power Requirement - 12 - 14 VDC
In the Box:
Gauge
Bezel/Faceplate - Black and White
Display sun cover
Mounting hardware
Transducer - thru-hull w/30' cable
Instruction manual
*Sold as an Individual
|
154.80 |
|
|
Chrome Trim Bezel for DepthTrax Gauges
Customize the look of your Boat Mount Depth Finder display with this chrome plastic trim ring (bezel). It's specially coated to withstand oxidation and corrosion.
Compatible with:
DepthTrax 2B and 2BX,
DepthTrax 1B and 1BX
D10D and D10DX
DF1000D and DF10000DX
1000-01 and 1000.01T
*Sold as an Individual
|
8.23 |
|
|
STRIKER™ Vivid 7sv Fishfinder with GT52HW-TM
See fish and structure in colorful detail with the STRIKER™ Vivid 7sv fishfinder. This easy-to-use 7” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT52 transducer for best-in-class Garmin CHIRP traditional sonar as well as CHIRP ClearVü and CHIRP SideVü scanning sonars. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. Built-in Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications and access the Garmin Quickdraw™ Community. STRIKER Vivid 7sv includes tilt/swivel mount plus hardware and cable.
Features:
Easy-to-use 7” color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included
Includes a GT52 transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars
High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed
Includes built-in Quickdraw Contours mapping
Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications (including software update notifications) and access the Garmin Quickdraw™ Community
GT52HW-TM
Plastic, TM or Trolling Motor Transducer, High Wide CHIRP/CHIRP DownVü/SideVü - 455/800kHz, 500W, 12-Pin
GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP DownVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat.
The 12-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP DownVü and SideVü (455/800 kHz) elements have a power rating of 500 W each (1,500 W total).
GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
Features:
Frequency: CHIRP High Wide (150-240 kHz); ClearVü CHIRP 455 kHz (425-485 kHz) & 800 kHz (790-850 kHz)
Power: Traditional 250 W; ClearVü/SideVu 350 W
Beamwidth: Traditional (24-16); ClearVü/SideVü (2.0x50 @ 455 kHz) & (1.0x30 @ 800 kHz)
Maximum depth: Traditional: 800 ft.; ClearVü: 500 ft.; SideVü: 500 ft.
Depth/Speed/Temperature: Depth and Temperature
Number of pins: 12-pin
Cable length: 20 ft.
Supported deadrise/Transom angles: 0°-70° degree transom
In The Box
STRIKER Vivid 7sv fishfinder
GT52HW-TM transducer
Power/data cable
12-pin to dual 4-pin transducer adapter cable
Tilt/swivel mount
Hardware
Garmin bumper sticker
Documentation
|
623.99 |
|
|
STRIKER™ Vivid 9sv Fishfinder with GT52HW-TM
See fish and structure in colorful detail with the STRIKER™ Vivid 9sv fishfinder. This easy-to-use 9” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes a GT52 transducer for best-in-class Garmin CHIRP traditional sonar as well as CHIRP ClearVü and CHIRP SideVü scanning sonars. High-sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. Built-in Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications and access the Garmin Quickdraw™ Community. STRIKER Vivid 9sv includes tilt/swivel mount plus hardware and cable.
Features:
Easy-to-use 9” color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure; tilt/swivel bailmount bracket included
Includes a GT52 transducer for built-in Garmin CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonars
High-sensitivity GPS to mark waypoints, create routes and view your boat’s speed
Includes built-in Quickdraw Contours mapping
Wi-Fi® connectivity allows you to connect to the ActiveCaptain® app1 to transfer waypoints, receive smart notifications (including software update notifications) and access the Garmin Quickdraw™ Community
1 Requires app on your compatible smartphone paired to the STRIKER™ Vivid 7cv fishfinder; see Garmin.com/ble
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
GT52HW-TM
Plastic, TM or Trolling Motor Transducer, High Wide CHIRP/CHIRP DownVü/SideVü - 455/800kHz, 500W, 12-Pin
GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP DownVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat.
The 12-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP DownVü and SideVü (455/800 kHz) elements have a power rating of 500 W each (1,500 W total).
GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
Features:
Frequency: CHIRP High Wide (150-240 kHz); ClearVü CHIRP 455 kHz (425-485 kHz) & 800 kHz (790-850 kHz)
Power: Traditional 250 W; ClearVü/SideVu 350 W
Beamwidth: Traditional (24-16); ClearVü/SideVü (2.0x50 @ 455 kHz) & (1.0x30 @ 800 kHz)
Maximum depth: Traditional: 800 ft.; ClearVü: 500 ft.; SideVü: 500 ft.
Depth/Speed/Temperature: Depth and Temperature
Number of pins: 12-pin
Cable length: 20 ft.
Supported deadrise/Transom angles: 0°-70° degree transom
In The Box
STRIKER Vivid 9sv fishfinder
GT52HW-TM transducer
Power/data cable
12-pin to dual 4-pin transducer adapter cable
Tilt mount
Hardware
Garmin bumper sticker
Documentation
|
743.99 |
|
|
G-Force Troll Cable Organizer - Black Neoprene
With the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!
The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.
For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.
Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.
|
35.32 |
|
|
Depth range to 600ft and on plane readings up to 60mph. Automatic range and sensitivity adjustments for no-worry usage. Features polarized LCD display for easy viewing in any environment, dual depth alarms can be set to warn of depth changes, one touch alarm muting, user selected unit of measure (feet or meter) and keel offset designed to properly adjust depth readings. Dual-mount transducer can be transom mounted or internally glue mounted to hull. High speed transducer resolution of 7X per second. Includes 30' transducer cable length for small or large boat installations and two interchangeable faces (Black, White) and three bezels (Black, White, Chrome). Designed to match most Sierra gauge series.
|
169.99 |
|
|
B45 Bronze Thru-Hull with Depth & Temperature - 8-Pin for Garmin
The B45 is Airmar’s smallest, bronze, thru-hull stem, offering quality design at an economical price. The classic housing is streamlined to deflect aerated water from the transducer’s face, providing solid echo returns.
Features:
Bronze housing
Depth and Temperature
Recommended for planning-hull powerboats and cruising sailboats up to 9 m (30’)
Good sensitivity in a compact housing
High-performance fairing included
Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) accuracy
Specifications:
Fits: All Garmin 50/200 kHz units with 8-pin
Usable Shaft Length: 92 mm (3.62 in.)
Standard fairing block: 33-351-01
Frequency: 50/200 kHz
Beamwidth: 50 kHz—45°, 200 kHz—12°
RMS Power: 600 W
Maximum Depth Range (50 kHz): 235 m to 353 m (800 ft. to 1,200 ft.)
Maximum Depth Range (200 kHz): 118 m to 206 m (400 ft. to 700 ft.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
Raymarine i70s Sailing System Pack, Wind, Depth, Speed
i70s Multi Display E70327
Maximum Visibility and Maximum Versatility
The i70s multifunction gives you the flexibility to display instrument and
navigation data that is most important to you. Equipped with a bold and
bright 4.1_ display, the i70s is easy-to-customize with digital, analogue
and graphical displays of depth, speed, wind and more. Add the i70s to your
existing Raymarine instrument system or create a network of i70s displays
and sensors, the choice is yours.
Features:
4.1" super bright oversized LCD for maximum visibility
All weather optically bonded display technology delivers brighter
colors, sharper contrast, and a wide viewing angle
Glass bridge industrial design compliments Raymarine eS and gS Series
multifunction displays
Simple user interface with sculpted rubber keypad for precise operation
in all conditions
Customizable data displays of depth, speed, wind and more
SeaTalkng networking for seamless connectivity to Raymarine systems and
NMEA2000* networks
NMEA2000 connectivity* for engine, environment fuel and navigation data
Convenient AIS repeater mode allows you to visually track nearby AIS
targets
Combine the i70s with the ITC-5 instrument transducer convertor and
connect to analog depth, speed, and wind sensors
Network the i70s with Airmar DST800 transducers and the new in-hull P70s
smart transducer
Supplied with both black (eS Series style) & (e Series style) gunmetal
bezels and protective suncover
*NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required
for connecting the i70s to NMEA2000 backbone.
Intuitive LightHouse User Interface
The i70s places frequently used navigation functions right at your
fingertips. The LightHouse instrument interface is consistent with Raymarine
LightHouse multifunction displays, so Raymarine MFD users will feel right at
home with the i70s.
Networking
Raymarine i70s allows for connectivity to the following on board networks:
First generation SeaTalk networks using a SeaTalk to SeaTalkng
adapter cable
Current generation SeaTalkng networks
NMEA2000 networks using a SeaTalkng to DeviceNet adaptor
In addition to flexible networking capability the i70s features
user-selectable data sources, for integration with multi-sensor
networks.
AIS Repeater
Display AIS targets from NMEA 2000 AIS receivers. View the closest 25
AIS-equipped vessels and select individual targets to obtain vessel
information.
iTC5 Transducer Converter E70010
The iTC5 Instrument Transducer Converter enables the use of common analog
transducer signals with new digital instrument displays like Raymarine's i70
and ST70 Plus. The ultra-compact iTC5 has connections to host the five most
common analog transducers; depth, speed/temperature, wind, compass and
rudder. The iTC5 instantly converts these 5 analog signals to digital
SeaTalkng protocol.
In addition to providing analog-to-digital conversion, the iTC5 provides all
of the necessary power and communications connections to the transducers.
This greatly simplifies the installation of new systems, and also provides a
simple and cost-effective means for owners of older analog instrument
displays to upgrade to the latest digital display technology. The iTC5
eliminates the need for expensive "smart" transducers or individual
instrument pods. Complete control for calibration and alarms is performed
through the i70 or ST70 Plus instruments.
The iTC5 connects to Raymarine's SeaTalkng network and works with
most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80
and ST290 series instruments. Additionally the iTC5 works with Raymarine
fluxgate compass modules as well as rotary and linear rudder feedback
transducers to support compass heading and rudder angle instruments.
Features:
All-in-one analog to digital converter for depth,
speed/temperature, wind, compass and rudder transducers
Outputs SeaTalkng and NMEA2000 data to digital instruments,
MFDs and more
Enables easy upgrade of legacy analog instrument displays without
replacing transducers
SeaTalkng network provides all necessary power and data
connections
Ideal for use with Raymarine i70 and ST70 Plus digital instrument
systems
Wind Vane E22078
Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable.
DST800 Nylon Thru hull A22154
Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for
ST60, ITC-5
PACKAGE CONTAINS:
1ea E70327 i70s Instrument
1ea E70010 ITC-5
1ea A22154 DST800 Transducer
1ea E22078 Standard Wind Transducer
1ea A06031 Backbone Terminator
1ea A06074 Inline Terminator
1ea A06068 Backbone Cable 9M
1ea A06049 Power Cable
|
1373.68 |
|
|
Plastic Thru-Hull, Digital Depth and Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Thru-Hull
Depth and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
600.00 |
|