Flush Mount Enclosure with Nozzle For cockpit or any onboard washdown The highest quality wash down system on the market, HoseCoil's Flush Mount Enclosure includes a quick release lid for hiding and protecting a solid blue 15' HoseCoil. HoseCoil is constructed of high performance polytherester material. Featuring solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection. HoseCoil is designed to connect directly into the boat's internal pressurized water system. Dimensions: 8"d x 13"depth Requires: 6-3/4" cut out 13" below deck clearance Features: PETG Housing Material - Extremely durable and see-through for inspection 15' High Performance HoseCoil - Highest quality Polyether material, no kinking damage comapred to vinyl hoses, UV resistant for longer life and no fading, quick recoil for easy storage and brass, long-life fittings Tight O-Ring Seal - High quality seal for tight fit Polyethylene Lid - Easy to use locking hatch Brass Twist Nozzle - Positive shutoff, variable flow rate and rubber tip for protection Brass Bulkhead Inlet with Stainless Steel Fittings - Large diameter for better flow rate, stronger and longer lasting than plastic

Horizontal Mount Enclosure with Additional 5' Feeder Hose For installing a washdown hose on our boat, home or spa HoseCoil's Horizontal Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 5' HoseCoil constructed of high performance polyether material. HoseCoil features solid brass fittings and an adjustable brass nozzle with a rubber grip and rubber tip for fiberglass protection. The Horizontal Mount Enclosure can be used to plumbed directly into your existing pressurized water system or raw water washdown pump. Included is a 5' feeder hose for direct connection to an external water spigot.

Side Mount Enclosure For cockpit or any onboard washdown HoseCoil's Side Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 15' HoseCoil constructed of high performance polytherester material. HoseCoil features a spray pattern adjustable nozzle with a comfortable rubber grip. This enclosure is designed to connect directly into the boat's internal pressurized water system. Dimensions: 8"w x 15"h x 5"d

62 Series RV Carbon Monoxide - White - Flush Mount - 12V with Trim Ring Features: This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts. NMMA Listed Component. Space Saving design works in harsh marine environments. Works in extreme temperatures. Only CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor. No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available. Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO. End of Life Signal alerts boater to replace the alarm after 5 years of service. Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain. Specifications: Conforms To ANSI / UL STD 2034* * Testing Laboratory: ETL/Intertek Alarm Point: 400 PPM 4-15 Minutes Low voltage power warning at 7 Volts Power Supply and Current Draw: 37 mA @ 13.8 VDC Operational Range: 13.8 Volts +/-15% Low voltage power warning at 7 Volts Operating Temperature: -40°F to +158°F Case Size: 4.5″W x 3.25″H x 1.25″D

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch. Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels

Expandable 50' Hose with Nozzle & Bag The expandable hose shrinks to 1/3 of its length for ease of stowage and is built with double-layered rubber inner tube and durable Dacron outer cover. Dacron is known for its tough and elastic properties. The expandable hose easily coils and feels just like a quality 3/4" braided dock line.   Kit Includes: Expandable hose that shrinks to 1/3 of its length 2-tone nylon and mesh storage bag Spray nozzle with comfort grip The nozzle has an adjustable spray tip, trigger handle and rubber over-molded comfort grip.

Expandable 75' Hose with Nozzle & Bag The expandable hose shrinks to 1/3 of its length for ease of stowage and is built with double-layered rubber inner tube and durable Dacron outer cover. Dacron is known for its tough and elastic properties. The expandable hose easily coils and feels just like a quality 3/4" braided dock line.   Kit Includes: Expandable hose that shrinks to 1/3 of its length 2-tone nylon and mesh storage bag Spray nozzle with comfort grip The nozzle has an adjustable spray tip, trigger handle and rubber over-molded comfort grip.

Flush Mount Hose Adapter Perfect solution to remove that unsightly hose bib deck fitting and rusty knob. This will enable you to connect your water hose in seconds. Enables you to quick-connect your water hose in seconds. Position this fitting close to your anchor windlass to clean muddy anchors, or locate one on each side of your vessel to make cleanups much easier. Combine the deck washdown fitting with a hose coil washdown hose and keep the deck clutter free. Features: Extra 3/4" GHT male hose adaptor suitable for HoseCoil Water flow available with an easy twist of the fitting Easy to install Position this fitting close to your anchor windlass to clean those muddy anchors. Or locate one on each side of your vessel to make those cleanups much easier Just combine the Quick Release Deck Washdown fitting with a Hose Coil Washdown hose and a high volume Jabsco PAR-Max 4 Washdown pump to keep the deck clutter free Comes with a pre-installed check valve that connects your hose with a simple twist to the deck fitting, even under full pressure

FM-F65RW FM Series 6.5" Flush Mount Round Marine Speakers - White Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm (5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F65RB FM Series 6.5" Flush Mount Round Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm (5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-65SW FM Series 6.5" 120 Flush Mount Square Marine Speakers - White Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-65SB FM Series 6.5" 120 Flush Mount Square Marine Speakers - Black Grill - 120W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and water tightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 6.5" Peak Power: 120W RMS Power Rating: 30W Efficiency (1W/1M): 87 dB Frequency Response: 100 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 15-80W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 138mm x 138mm (5-7/16" x 5-7/16") Mounting Depth Clearance: 70mm (2-3/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 4L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Round Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm (6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77SW FM Series 7.7" Flush Mount Square Marine Speakers - White Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm x 165mm (6-1/2" x 6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FM-F77RB FM Series 7.7" Flush Mount Square Marine Speakers - Black Grill - 200W Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine speakers are designed to deliver enhanced acoustics to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends. Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series speakers are designed to be flush mounted with a mounting profile no thicker than 2.5mm [3/32"] for a premium, visually-appealing, near-flat finish. With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series speakers are built to last on board season after season. Enhanced Design Aesthetics The FM Series have been purposely created to meet the latest boat design trends with a sleek and minimalistic design. By incorporating a timeless, classic grille styling with two form factors (round or square) and two color options (black or white), the FM Series will complement the aesthetics of any vessel with its enhanced design cues. Innovative Flush Mount Design The innovative, flush mount design of the FM Series speakers allows for an ultra low profile installation (mounting profile no greater than 2.5mm or 3/32") for a visually appealing, premium near-flat finish never before seen on a marine speaker. The FM Series also features an intelligent mounting system for a non-intrusive, simple installation. Simply place the speaker in the cutout, tighten the screws and the 'speaker legs' will tighten against the panel, keeping the speaker in place without creating any screw holes to your vessel. The True-Marine™ Standard As a True-Marine product, the FM Series speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3-year consumer warranty. IP65 Weatherproof Perfect for installation both indoors and outdoors, the FM Series speakers are rated IP65 for water and dust ingress protection from the front when installed correctly, while also meeting industry standards for UV and salt fog protection. Designed To Comply With ISO12216 The FM Series have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality. Features: Optimized Full Range Speaker: The FM Series speakers are acoustically optimized for performance in the marine environment, by combining optimized speaker drivers and aluminum dome tweeters to produce quality sound at all volumes. Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel. Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the speaker in place without creating any screw holes to your vessel. True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation. Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness. Specifications: Speaker Size: 7.7" Peak Power: 200W RMS Power Rating: 50W Efficiency (1W/1M): 91 dB Frequency Response: 80 Hz - 18 kHz Nominal Impedance: 4 Ohms Recommended Amplifier Power (RMS): 20-150W/Ch Tweeter Type: Aluminum Dome Cone/Surround Material: Polypropylene with rubber surround Mounting Diameter Clearance: 165mm x 165mm (6-1/2" x 6-1/2") Mounting Depth Clearance: 83mm (3-1/4") Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 8L Operating Temperature Range: 0-50°C (32-122°F) Storage Temperature Range: -20-70°C (-4-158°F) Water and Dust Resistance (IPX rating): IP65 Warranty: 3 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.