Goulds 10K55 Carb/SC/Viton Mechanical Seal

Goulds Pump 10K124 Mech Seal Viton

MP Pumps 21366 PUMP FM10 C/I 184TC MT Flomax 10 Pumpaks are liquid-ends less power source. Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Cast iron construction and will fit 184C/145TC NEMA motors with feet. PumPaks are provided less motors and with 5" maximum impeller diameters.   Specifications Rated Capacity 140 GPM Maximum Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.   Pump water end only less motors. Motors Required: 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required: 184C/145TC NEMA motors with feet.

MP Pumps 25979 FM5-CI-56C PUMP   Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 56C NEMA motors less feet.   Specifications Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss weight; 304 stainless steel stub shaft to fit either 5/8" driver shaft; viton mechanical seal. Pump water end only less motors.   Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 56C NEMA motors less feet   

Goulds Pump 5K555 Gv Seal Ring Nsf61

Goulds Pump 5K556 Gv/Seal Ring Jrs/D Nsf61

Goulds Pump 10L4 Mech Seal Lca Lcb Lc

Goulds Pump 10K65 Mech Seal Kit-Severe Duty

Goulds Pump 10K170 Mech Seal Assy C/Sc/Epr

Goulds Pump 10L38 Mech Seal

Goulds Pump 10K199 Mech Seal Assy

Goulds Pump 10K84 Shaft Seal Assy

Goulds Pump 10K75 Mech Seal

MP Pumps 26074 Flomax 5 C/I MT 7/8"   Flomax 5 Pumpaks are liquid-ends less power source. They are shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. They are available in cast iron and all bronze construction and will fit 184C/145TC NEMA motors with feet.     Specifications Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Impeller Diameter: Shipped with 5" maximum diameter impellers for trimming to pumping condition by customer. Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 stainless steel stub shaft to fit either 5/8" or 7/8" driver shaft; viton mechanical seal.   Pump water end only less motors Motors Required 1-1/2 HP, 2 HP or 3 HP TEFC, 3450 rpm, single phase or three phase, 60 Hz Motor Frames Required 56C NEMA motors less fit or 184C/145TC NEMA motors with feet.

Haight Pump 54UR-VMS Pump Vit Mech Sl Rv Specifications Construction Material:  Ductile Iron Capacity (max):  54 gpm Discharge Pressure (max):  250 psi Temperature:  620 degrees FT Inlet Port is 2 inch NPT and 2 inch ANSI Flange Discharge Port is 2 inch NPT and 2 inch ANSI Flange Seal: Viton Mechanical Seal Pump End Only less motor   54U - DIU Series Double Positive Displacement Pumps   These gear pumps have a Gear within a gear internal design and is very effective at handling a broad range of applications while operating at standard motor speeds, and reducing wear. Both of these operating characteristics play an important role in minimizing overall capital investment, and operating expenses. Compact rugged, and easy to maintain, these pumps are ideally suited to close-coupled mounting, or direct mounting to the motor. These pumps can operate at standard motor speeds, eliminating the need for pulleys/gear reducers. The involute gear design offers excellent suction characteristics, and minimizes noise and reduces internal bypassing It comes standard with self-lubricating gramix iron bearings, and easy to maintain Buna-N lip seals. The seals are installed in the UniverSeal design for simple and quick replacement, or change to alternate seal style. This is just the bare pump end, but there are optional mounting brackets which are designed for in-line mounting with standard NEMA frame size motors or bedplate mounting. These pumps are self-priming and will develop up to 27 inches of vacuum. Pumps will operate in either direction, and flow direction in the pump can be changed without disrupting the attached piping, or special tools.   Applications Petroleum Products Machine Manufacturing Applications Machine Tools Hydraulic Equipment Lubrication Systems Diesel Engines Food Processing Restaurant Equipment Misc. Chemical Applications Glue and Ink Soap and Detergent Products Building and Highway Contractors Paper Products Industries Automotive Applications Shipbuilding Applications