|
5" Touchscreen - Black
Access and monitor the boat’s sensors directly with this wall-mounted 5″ interactive touchscreen in black.
|
419.99 |
|
|
G-Force Trolling Motor Handle & Cable - Black
Endorsed and proven by Gerald "G-Man" Swindle.
The G-Force™ Handle is a quantum leap improvement in trolling motor replacement rope technology.
This trolling motor replacement release and lift system is a rugged, nylon jacketed stainless steel cable with a large comfortable cushioned grip handle which solves the problem of the cheap lift and release ropes on today’s trolling motors.
Endorsed by B.A.S.S. Elite Pro “G-Man” Gerald Swindle, this is the last lift & release system you will need to buy!
As trolling motors become more powerful, complex, and heavy, the lift systems from the manufacturers have not kept pace. Too often fishermen are faced with broken ropes and handles often in critical times, especially tournament guys. The G-Force™ Handle solves that problem once and for all. Fits most models and makes. The G-Force™ Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.
*NOT RECOMMENDED FOR USE ON MINN KOTA EDGE OR MOTORGUIDE PRO MODELS*
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
51.94 |
|
|
LCD-5 Monitor Full Color 5" Touchscreen
GROCO's E-Valve LCD-5 is a touchscreen LCD monitor that allows wireless, helm-based remote control of GROCO E-Valve motorized seacocks. Use this customizable touchscreen display to monitor and control seacocks as well as the GROCO SSA flow monitor system.
Seacock control functions are color-coded and include Exercise All, Close All, Open All, Lock, and Automatic. Monitor may be flush or bracket mounted (bracket is included).
Features:
Customize the vessel view screen with your boat and its component locations
Exercise All function (shows moving valve handles) lets you operate all seacocks to prevent marine-growth build-up; orange icon indicates a valve operating improperly
Close All function (red) closes all open E-valves
Open All function (green) opens all E-valves that are not locked or are not marked Automatic
Lock function (blue) can lock E-valves in either the open or closed position, both mechanically and electrically
Automatic function (yellow) opens a specific E-valve when the connected equipment is turned on, and closes it when the connected equipment is turned off
Dimensions: 4-3/8" H x 4-1/2"
|
1774.00 |
|
|
Fenderfits™ Fender Cover for F-3 and G-5 Fender - Black
FenderFits™ are fully reversible, incredibly durable and hand-washable. Manufactured using premium quality high-bulk acrylic yarn, tested to British Standards Grade 7 lightfastness (for resistance to sunlight), the resulting fabric lasts up to 4 times longer than most competitors.
FenderFits™ products are made entirely in-house at their facility in the old French port of Cannes where they're knitted on state-of-the-art machinery, hand finished by a team of professional seamstresses and individually inspected before packing.
Compatible With:
F-3 Fenders
G-5 Fenders
Features:
Hand-crafted with high-bulk acrylic yarn
Sun resistant
Washable
Custom fit for a tailored look
Drawstring closure for the perfect fit
Quick and easy installation
*Sold as an Individual
|
34.84 |
|
|
Elite Fender Cover for G-5, HTM-2, F2 and NF-5 Fenders - Black
Fender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series.
Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.
Compatible With:
G-5 Fenders
HTM-2 Fenders
F-2 Fenders
NF-5 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual
|
47.65 |
|
|
Quick Cleat - 5/16" - Black
The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.
Made of nylon reinforced composite and secures braided lines up to 5/16" (10 mm) with a working load limit of 154 lb (70 kg.) The Barton Marine Quick Cleat offers exceptional value.
From securing fenders, gear, painter lines, buckets, boat gears or other gear, the Quick Cleat is designed to alter rope tension in one direction, but grips the rope firmly and securely in the other.
Quick Cleats are easy to use. Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.
Features:
Dupont Zytel Construction
Easy to install
Technical Specifications:
Color - Black
Material - Zytel nylon
Working Load - 154 lb (70 kg)
Maximum Rope Diameter - 5/16" (10 mm)
Height - 1-1/16" (2.7 cm)
Weight - 2 oz (55 g)
*Sold as an Individual
|
25.14 |
|
|
Deck Organizer - Size 2 - 5 Sheave - Black
Designed for use when diverting mast base control lines and halyards back to the cockpit. Allowing the crew to sail from the security of the cockpit.
Suitable for boats up to 32' (9.75 M) with halyard size up to 9/16"
Deck organizers can be double stacked.
Technical Specifications:
Material - Spectro Anodized Aluminum
Dimensions (L x W x H) - 12.52" x 1.5" x 1.1" (318 x 38 x 28 mm)
Weight - 16.4 oz (465 g)
Sheave Material - Molded Acetal
Sheave Diameter - 1.73" (44 mm)
Sheave Width - .71" (18 mm)
Maximum Line Diameter - .55" (14 mm)
*Sold as an Individual
|
105.77 |
|
|
GP1900-13 SailPod Pre-Cut for Simrad NSS9 evo2/B&G Zeus9 for 9.5" Wide Guard
SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong!
Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel
We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
Commitment to Quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
|
383.99 |
|
|
52MM (2-1/16") ViewLine Oil Pressure Gauge 80 PSI/5 Bar - Black Dial & Round Bezel
Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.
More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.
Interchangeable bezel option.
Features:
8 pole Tyco/Hirschmann MQS plug
Red LED Via Plus And Min Warning Light
Operating voltage 8–32 V
Input signal: standard Ω values
Optional make-point switch can be connected
Reverse polarity protection
Anti-fog double lens
Front side protection rating IP67
52 mm installation diameter
50 mm installation depth
In the Box:
Gauge
Connection Cable
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
46.60 |
|
|
52MM (2-1/16") ViewLine Fuel Level Gauge Empty/Full - 240-33.5 OHM - Black Dial & Round Bezel
Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.
More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.
Interchangeable bezel option.
Features:
8 pole Tyco/Hirschmann MQS plug
Red LED Via Plus And Min Warning Light
Operating voltage 8–32 V
Input signal: standard Ω values
Optional make-point switch can be connected
Reverse polarity protection
Anti-fog double lens
Front side protection rating IP67
52 mm installation diameter
50 mm installation depth
In the Box:
Gauge
Connection Cable
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
46.60 |
|
|
52MM (2-1/16") ViewLine Fuel Level Gauge Empty/Full - 240 to 33.5 OHM - Black Dial & Triangular Bezel
Veratron ViewLine offers a comprehensive modular, modern series of instruments for engine monitoring.
More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability. As the result of ongoing research and development work, we offer an innovative comprehensive standard instrumentation platform which is also available for outboard engine use. ViewLine provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
The ViewLine 52 mm Gauges are available in black or white dial versions, which are always completed with a round bezel in identical color.
Interchangeable bezel option.
Features:
8 pole Tyco/Hirschmann MQS plug
Red LED Via Plus And Min Warning Light
Operating voltage 8–32 V
Input signal: standard Ω values
Optional make-point switch can be connected
Reverse polarity protection
Anti-fog double lens
Front side protection rating IP67
52 mm installation diameter
50 mm installation depth
In the Box:
Gauge
Connection Cable
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
46.60 |
|
|
Fender Cover for A-5 Fender - Black
Fender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series.
Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.
Compatible With:
A-5 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual
|
196.60 |
|
|
Elite Fender Cover for F-5 Fender - Black
Fender covers should be as tough as the fenders they protect. That was our criteria used in developing the Elite Fender Cover series.
Polyform uses a premium-grade polyester yarn that is resistant to abrasion and UV exposure. Additionally, it resists water absorption better than other materials, keeping fenders manageably light when wet. The cover is woven on a special knitting machine that produces a seamless tube, meaning no seams to split. This method allows for a heavier, stronger yarn content resulting in a great fender cover that is built to last for many years, not just a season.
Compatible With:
F-5 Fenders
Features:
Hand-crafted with heavy-duty polyester fabric for durability
Sun resistant, abrasion-resistant and water-resistant
Washable
Custom fit for a tailored look
A tough 1/4" line drawstring closure
Quick and easy installation
*Sold as an Individual
|
61.81 |
|
|
Nylon Tiller Extension Retaining Clip - 16mm(5/8") - Black
U.V. Stabilized Nylon
Suits 16mm(5/8") Diameter Tube
|
4.58 |
|
|
Flush Mount Latch - Straight Cam Bar - 2.5" Hole - Black
Features:
Black plastic and chrome plated zinc alloy
Straight cam bar
For surface thickness : 1/8" to 3/4"(0.3cm to 1.9cm)
Face Plate O.D.: 3" (7.6cm)
Installs in 2-1/2" (6.4cm) Diameter Hole
|
44.33 |
|