|
Extra-Duty On/Off Diesel Power Battery Switch
3 studs heavy-duty diesel power battery switches are built with heavy-duty copper sweep contacts to ensure positive circuit control. Rugged internal components are protected by a tough, impact-resistant polycarbonate housing that is impervious to the elements. They also feature Alternator Field Disconnect (AFD) allowing selection of any position, including "off", without damage to the alternator or electrical system.
Features:
Guest 2304A Extra-Duty On/Off Diesel Power Battery Switch Model: 2304A
For 6, 12, 24, or 36V systems
Cable lug size: 1/2"
|
181.79 |
|
|
Diesel Power Battery Heavy-Duty Switch
Features:
For 6, 12, 24 or 36 Volt systems
Polycarbonate case
One year warranty
Specifications:
Continuous Amps: 450
Momentary Amps: 800
Cable Lug Size: 1/2"
Color: Gray
Dimensions: 5-1/2" sq x 3-1/2"H
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
176.56 |
|
|
Diesel Power Battery Selector Switch
Product Features
Polycarbonate case
For 6, 12, 24 or 36 Volt systems
Alternator field disconnect (AFD) allowing selection of any position including "off", without damage to alternator or electrical system
One year warranty
Specifications:
Continuous Amps: 360
Momentary Amps: 600
Cable Lug Size: 1/2"
Color: Gray
Dimensions: 5-1/2" sq x 3-1/2"H
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.80 |
|
|
Heavy Duty On & Off Battery Switch - 600A
The heavy-duty 422768 selector switch has 350A continuous and 1500 cranking amps to start a dual diesel engine. The battery selector switch isolates and/or combines two battery banks (422768). Installs with four #10 RH fasteners (not included).
Features:
Can be surface or rear panel mounted
Ignition protected
Safe for installation on gasoline-powered boats
Constructed of injection molded nylon with machined brass contacts
CE certified
Specifications:
Length (inch): 4"
Width (inch): 4"
Depth (inch): 3-5/8"
Amps: 350
|
73.64 |
|
|
Heavy-Duty Toggle Switch SPST On-Off 2-Wire
Toggle Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Standard Heavy Duty Toggle Switch Series is our most robust series of toggle switches, available in several configurations of actuators and circuitries.
Specifications:
Mounting: Nickel Plated Brass Face Nut through 15/32 (11.90mm) Panel Hole *Part Number 5520: Black Finished Face Nut
Voltage Ratings: 10A at 36V DC/15A at 24V DC/25A at 12V DC
Current Rating (Continuous) in Amps: 10
Voltage Rating (Max): 36
Circuitry: SPST
Input Terminals: 2 Leads (203mm 16AWG Stripped) 1 Plug - 2 Leads (203mm 6AWG Stripped) 1 Plug
Housing: Weather-Resistant PVC-Coated Plasticized Housing
Actuator: Standard Toggle
Actuator Details: Nickel-Plated Brass - 17.4625
Panel Thickness: Up to 1/4 (6.35mm) thick
Contact Material: Silver
Recommended Torque: On - None - Off
|
17.29 |
|
|
Galley Maid Pressure On-Off Switch
|
93.60 |
|
|
Pro Installer 400A Selector Battery Switch - MC10
Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.
Specifications
Mounting: Surface, Rear or Front
Voltage: 48v DC (for 12-48v systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1-2-Both-Off
Stud: 3x 10 mm (3.8")
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
46.08 |
|
|
Pro Installer 400A Selector w/Field Disconnect Battery Switch - MC10
Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.
Specifications
Mounting: Surface, Rear or Front
Voltage: 48v DC (for 12-48v systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85" x 3.85" x 3.62"
Operation: 1-2-Both-Off
Stud: 3x 10 mm (3.8")
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.99 |
|
|
Standard Battery Switch
For any vehicle that needs to use two batteries where one battery is used for starting the engine, while the other is used to power auxiliary loads. This is a common situation in trucks, boats, RVs, police and rescue vehicles, and in ambulances or fire equipment. A selector switch allows use of the first battery, the second battery, or both batteries simultaneously. This provides back-up starting power in an emergency.
Features:
These switches combine the functions of Battery Selector and Master Disconnect Switches to give four battery power options:
Power cut off at the source
Power On, Battery 2
Power On, Battery 1
Power On, both Batteries
Battery selector switches provide a positive battery disconnect, which has many advantages:
It gives a reliable shutdown of power during maintenance
The version with the key protects against theft of the vehicle, when unattended
It helps protect against electrical fires, when the vehicle is not in use, and minimizes battery drain
Specifications:
Rating: 500A intermittent, 310A continuous, 6-36V DC Electrical ratings on UL labels are conservative. Electrical Ratings Labeled UL 707B
Use with either alternators or generators
Make before break design permits operation through the three On positions with the engines running. Engines should always be shut down before turning to Off
Heavy-Duty Construction Vaporproof, weather-, dust- and corrosion-resistant
Durable, fracture-resistant high temperature plastic case, knob and insulator
Switches conform to USCG section 183.410 for ignition protection
Heavy duty copper stud terminals, with brass hexnuts
Can be surface mounted, or installed through a 3 5/16" diameter hole in the panel
Dimensions: Flange: 6" (152.4mm) diameter, overall height 2 5/8" (66.7mm)
Terminals: 3 copper studs, 3/8" (9.5mm) diameter
|
68.62 |
|
|
2112A Battery On/Off Switch Universal Mount without AFD
Universal mount switches have longer stud lengths for improved assembly and easier cable routing. They are built with heavy-duty copper sweep contacts to ensure positive circuit control. Rugged internal components are protected by a tough, impact-resistant polycarbonate housing that is impervious to the elements.
Features:
Cable Lug Size: 3/8"
Dimensions: 5.0" x 2.75"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.22 |
|
|
HD-Series Battery Switch Single Circuit ON/OFF
Features:
600 Ampere Continuous Rating
Accepts two 4/0 battery cables per terminal
Ignition protected - safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept multiple cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.02 |
|
|
3001 HD-Series Battery Switch Single Circuit ON/OFF with AFD
Features:
600 Ampere Continuous Rating
Accepts two 4/0 battery cables per terminal
Ignition protected - safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept multiple cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.31 |
|
|
Battery On/Off Switch without AFD
This battery switch can be used on 6, 12, 24 or 36V systems.
Features:
Polycarbonate case
Surface mount
Cable Lug Size: 3/8"
Dimensions: 5.50" x 2.63"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.92 |
|
|
Dual Battery Switch w/Mounting Ring & Legs - Bulkhead Mount
The Perko Dual Battery Selector Switch allows the addition of an extra battery for accessories. This switch provides the flexibility of selection between batteries or combined operation of both batteries in parallel for starting or charging. It can also serve as an emergency main disconnect switch in the event of an electrical problem. All models are make before break design and are ignition protected.
Four switch positions: Both "Off", Both "On", Battery 1 "On"/Battery 2 "Off", Battery 1 "Off"/Battery 2 "On"
Materials & Finish
Red polycarbonate polymer body
Black polymer actuator key
Nickel plated terminals
Features
For two or more batteries
Unique oval shape mounts in a round hole
Removable actuator key
Technical Information
Rating: 140 Amps Continuous, 200 Amps 5 Min. Intermittent, 250 Amps 30 Second Start
For use with alternators and generators 6-50 V.D.C. Marine Electrical Systems
Ignition Protected
Face Dimensions: 3-7/8" x 3-1/4"
|
41.99 |
|
|
3002 HD-Series Battery Switch Selector
Features:
500 Ampere Continuous Rating
Accepts 4/0 battery cables
Ignition protected - safe for installation aboard gasoline powered boats
.870" (22.01mm) stud length to accept 4 or more cable terminals
1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
Meets American Boat and Yacht Council (ABYC) requirements for battery switches
Tactile textures indicate knob position by feel only
Case design allows surface or rear panel mounting
Fits all Perko and Guest low amperage battery switch hole patterns
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
83.32 |
|