|
Super Dynaplate f/SSB Radio - 18" x 6" x 1/2"
Create a proper bonding and grounding system using Dynaplate grounding shoes to reduce the risk of serious hull damage and electrical shock associated with boat lightning strikes by providing a direct, controlled high-capacity path for lightning dissipation. SSB and AM radio transmitters rely upon a proper size ground to operate to their designed capacity. A Dynaplate grounding shoe helps provide a large solid surface (the water surrounding the boat) to "push off" from. This is technically known as "counterpoise" and is the other necessary half of the antenna system. The bronze Dynaplate material also serves as the next sacrificial metal on the galvanic scale after the zincs, providing another buffer against corrosion of stainless steel parts.
Features:
Easy to clean with wire brush
Conforms to ABYC standards
Mounting hardware included
Gold plated mounting bolt
Bronze mounting nuts
Copper washers
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
621.22 |
|
|
T-Top Aluminum Backing Plates - 5" x 6-1/2" x 1/4" - Pair
2 per pack
All backing & mounting plates are pre-drilled for installation.
|
71.74 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 29" - Black
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
269.71 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 29" - Grey
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
269.71 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 29" - Navy
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
269.71 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 42" - Black
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
323.86 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 42" - Grey
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
323.86 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 42" - Navy
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
323.86 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 58" - Black
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
377.99 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 58" - Grey
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
377.99 |
|
|
Super Duty Inflatable Yacht Fender - 18" x 58" - Navy
The Super Duty inflatable yacht fenders are built to last. We use 30% heavier material and 15% higher tensile strength than the competition. Our fenders are also 50% more abrasion resistant and twice as tear resistant than the best-selling competitive brand. Five-year limited warranty.
Features:
Webbing exceeds 4500 lbs. tensile strength
Heavy-duty spring actuated valve with quarter turn lock for easy inflation or deflation
Welded seams have no glue to harden or breakdown
Yacht Size: Up to 75'
|
377.99 |
|
|
Jabsco X4020-105A Cam Screw O'Ring 1.6 X 6.1
|
0.95 |
|
|
RH5165
Standard Angle 30° Short Tube
Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
128.84 |
|
|
RH5167V
Vertical 0° Short Tube
Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
128.84 |
|
|
Swivel Base Rod Holders
RH5169
Half Angle 15° Short Tube
Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.
Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.
Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
|
128.46 |
|