1157 Stainless Steel Thimble Kit Includes: 2 stainless steel thimbles 4 heavy-duty brass connector sleeves 4 brass connector sleeves

Sailmaker Stainless Steel Thimble - 3mm(1/8") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 4mm(5/32") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 5mm(3/16") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 6mm(1/4") Cable Diameter Used to create eyes in both rope and wire rope

Sailmaker Stainless Steel Thimble - 8mm(5/16") Cable Diameter Used to create eyes in both rope and wire rope

50 AMP Male Stainless Steel Combo Kit The SmartPlug 50 AMP Combo kit includes the 50 AMP Stainless Steel inlet (BM50S) and 50AMP connector (BF50), everything you need to protect your boat from shore power overheating.   Installation of both components is easy.  The kit is designed to fit on 125/250 V systems with multiple seals on the connector to ensure a watertight fit on an existing cordset. Features Reduces Overheating – Increased pin and clip surface area greatly improves electrical conductivity during high amperage demand. Ease of Use – No twist required, the unique plug body shape and push-in design means it only goes in the right way every time-even in  the dark. Multi-Point Locking System – Side clips lock the plug securely into the inlet which eliminates any stress on the pins from movement of the power cord. Weatherproof Seals – Superior gaskets installed in the inlet cover and interior of the plug body eliminates moisture penetration. Quick and Easy Installation – Inlet mounting flange holes match twist-type holes for an installation that is typically finished in 30 minutes. *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Large Coastlock Snaps - 2Pack Includes: (350 lb. test) 2 Large Stainless steel Snaps with barrel swivel. 3 Heavy Duty Brass Connector Sleeves, and 3 Brass Connector Sleeves WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SW8 Anchor Swivel - 8mm Stainless Steel Jaw Jaw Swivel - f/11-16 lb. Anchors Stainless Steel Jaw Jaw Swivel

SW10 Anchor Swivel - 10mm Stainless Steel Jaw Jaw Swivel - f/16-44 lb. Anchors Stainless Steel Jaw Jaw Swivel

Stainless Steel Cover w/Lift Lid f/GFCI Receptacle This 302 stainless steel sealed cover with lift lid fits GFCI duplex receptacles. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fixed Keeper for Pull to Open Latches - Stainless Steel Features: Material: Stainless Steel Southco offers modifications to our standard products, explore the possibilities of how Southco can engineer a solution to meet your specific application requirements.

Mounting Clamp for 3.5" Radar Pole - Stainless Steel with Gasket Use this stainless mounting clamp to attach lights, support struts, lifting cranes, or other accessories.  Features: Features a rubber gasket and split design for a secure fit  Can be positioned anywhere along the length of the pole without removing the pole from the boat

SPT1001 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO20, HALO20+, HALO24 radars Garmin - Fantom 18 and 24, GMR18HD, 18xHD, 18HD+, GMR24HD and 24xHD, GMR40 radars Humminbird - HB2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Nobletec - 4KW radars Raymarine - QUANTUM (Q24C) and QUANTUM 2 (Q24D0, RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, 60, 64-S, GB40/NX40/45/NSE1/12 radars Sitex - RADARpc-4D Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual

SPT1002 - Stainless Steel PowerTower® Radar Mount - 6" Aft Leaning The Scanstrut Stainless Steel PowerTower® is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Stainless Steel, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1815, 1824, 1832, 1834, 1835, DRS 2D, 42DL, 42DL+, 4D, 4D-NXT, DRS4W, NavNet 18" and 24" Humminbird - AS 21RD4KW Inerphase - Mini RE-1, 8, 9 JRC 100, 100mk2, 1066, 1500, 1500mk2, 1800, 2000 Koden - 2kW 12" Lowrance - LRA-1800/RB714A/DX42 Navman - 8000 Series - 18" Seiwa - SWR-1, SWR-8, SWR-9 Simrad - GB40, NX4-/45, NSE8/12, RB712A, DX42S Sitex - MDS-1, 8, 9, 12, NKE-1066 Techmarine - T72.01, T72.02, T-72.04 Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Stainless Steel Range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Stainless Steel Height - 6" (152mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts) Installation manual *Sold as an Individual