RayNet Adapter Cable - 100mm - RayNet Male to RJ45 Raymarine's RayNet male to RJ45 adaptor cable. RayNet Raymarine’s current generation system replaces the RJ45 connector with a waterproof vibration tolerant twist pin connector that is designed for the marine environment.

Marine Network Adapter Cable - Small (Female) to Large Adapt the small network connector to the larger Garmin Marine Network connector with this cable — which is part of the Panoptix™ LiveScope ice fishing kit.

Adapter Cable - 25-Pin to 7-Pin - CP370 Transducer to Axiom RV The Raymarine transducer adapter cable allows you to keep your existing 600w Airmar transducer used with a CP370 sonar module and adapts it to your Axiom RV. The 7-pin side connects direct to your Airmar 600w transducer and the 25-pin to the transducer port on the Axiom RV. Features: Allows your existing Airmar 600w transducer to be used on Axiom 7 RV 7-pin to 25-pin adapter Compatible with 600w , DSM300, CP300 and CP370 sonar transducers

Adapter Cable 25-Pin to 25-Pin & 7-Pin - Y-Cable to RealVision & Embedded 600W Airmar TD to Axiom RV The Raymarine transducer adapter cable allows you to join your Raymarine RealVision 3D transducer and 600w Airmar embedded transducer and adapts them to your Axiom RV. The 25-pin pigtail connects direct to your RealVision 3D transducer and the 7-pin to the Airmar transducer. The single 25-pin end connects direct to your Axiom RV. Features: Attaches the Raymarine RealVision 3D transducer with a 600w Airmar embedded MFD sonar tranducer 7 and 25-pin to 25-pin adapter Compatible with Raymarine RelaVision 3D tranducers and Airmar embedded sonar

RayNet(M) to RayNet(M) Cable - 100mm The RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. Data: Ethernet Length: 100mm

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with SI-TEX NavPro units.

1M Adapter Cable with Male 9-Pin Navico Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Navico units.

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Garmin units.

Simrad adapter cable, Ethernet Yellow 5 pin male to RJ45 female 2 m (6.5 ft) *needed when hooking up a WM-2 to a NSE series

Fusion to Garmin Marine Network Cable - Male to RJ45 - 6' (1.8M) Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo.  These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system. Features: Length - 6' (0.15 M) Connections - RJ45 Compatible Products: Fusion Apollo RA770 Fusion Apollo SRX400 Fusion Apollo WB670 Fusion Apollo RA670 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fusion to Garmin Marine Network Cable - Female to RJ45 - 6" (0.15M) Use these adapter cables to link your GPSMAP® Series chartplotter to a compatible Fusion® stereo.  These cables will connect a Garmin Marine Network port to an RJ45 port and are offered in male and female connector varieties to fit your specific system. Features: Length - 6' (0.15 M) Connections - RJ45 Compatible Products: Fusion Apollo RA770 Fusion Apollo SRX400 Fusion Apollo WB670 Fusion Apollo RA670 *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DSM30 & DSM300 Transducer Adapter Cable The DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine's wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a new sounder-equipped Raymarine MFD is replacing both an old display and DSM. Adapter cable adapts DSM30/DSM300 transducers to A series Transducers

Marine Plug Adapter, 30A 125V Male to 15A 125V Female This is a male-to-female marine plug adapter. Heavy Duty Over Molded Construction: Custom grip for comfort Marine quality 5-year warranty Female Connector: 15/250A 125V Straight Blade Attaches to a cordset or boat inlet Male Plug: 30A 125V Locking Attaches to Dockside receptacle/cordset Specifications: Weight: 1 lb Dimensions: 5 × 2 × 6 in.

Adapter Cable SeaTalk (1) to SeaTalkNG - 1M An adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70. SeaTalkNG Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Marine Plug Straight Adapter, 15A 125V Male to 30A 125V Female A handy solution to connect a 30A shore power plug to a 15A household plug This straight adapter has an ergonomic design, making it easy to grip. This adapter allows you to plug the 30A shore power cord into a household outlet. A power indicator light lets you know that power is flowing through the connection. Designed to provide a temporary power solution for your boat. Features: Use only in an enclosed, dry location, such as powering your boat from a 15A power receptacle inside your garage Female connector attaches to the boat inlet or cord set The male plug attaches to a dockside receptacle or household outlet They do not have sealing collars and are not recommended for use in wet locations Ergonomic design for easy grip LED power indicator light Five-year warranty Specifications: Connections: NEMA L5-30R female twist-lock to 5-15P male straight blade Amperage: 15A Voltage: 125V Material: PVC jacket