Adapter Cable To Connect GT30 T/M to P729/P79 Connect a Garmin GT30 transom mount scanning transducer and an Airmar P72 or P79 in-hull mount traditional transducer to a compatible echoMAP™ chartplotter/sonar combo. This adapter cable allows the echoMAP to continue to display water depth from the in-hull transducer in instances when the transom mount transducer loses depth reading due to cavitation. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

XSONIC Transducer Adapter Cable to HOOK² Adapter cable to connect XSONIC Transducer to HOOK²

Universal Sonar 2 Adapter Cable Garmin Adapter Cable for Echo Series Universal Sonar delivers streamlined, interface-free sonar performance and DualBeam PLUS technology for best view of the waters below. This adapter connects your motor to your Garmin echo series with waterproof connectors.

MKR-US2-1 Garmin Adapter Cable Model:#1852061 Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your trolling motor to your favorite brand of sonar or fishfinder (200 kHz and 200/83 kHz DualBeam PLUS™ compatible). Shielded, IP68-rated waterproof connectors are metal tipped to prevent sonar interference. Compatible Models MKR-US2-1 Garmin Fishfinder 90, Fishfinder 100, Fishfinder 140, Fishfinder 160, Fishfinder 160C, Fishfinder 250,Fishfinder 250C, Fishfinder 300C, Fishfinder 320C, Fishfinder 340C, Fishfinder 400C, GPSMAP 168,GPSMAP 178C, GPSMAP 198C, GPSMAP 430s, GPSMAP 431s, GPSMAP 530s, GPSMAP 531s,GPSMAP 535s, GPSMAP 536s, Fishfinder 80*, Fishfinder 120**with optional Garmin part number 010-10145-00, sold separately

BlueNet™ Network to RJ45 Adapter Cable Use this adapter cable to connect your compatible third-party, OneHelm™ digital switching and Fusion® equipment, with an RJ45 port, to the Garmin BlueNet network.

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7-Pin Transducer Adapter Cable to HOOK² This adapter cable will adapt any Navico 7-pin tranducer to a HOOK2 unit.

7-Pin Adapter Cable to HOOK² 4x & HOOK² 4x GPS This adapter cable adapter any Navico 7-pin transducer to HOOK2 4x Fishfinder or HOOK2 4x Fishfinder with GPS.

Adapter Cable SeaTalk (1) to SeaTalkNG - 1M An adapter spur cable to connect a SeaTalk device to a SeaTalkng network. The connection must be made via a 'bridging' device such as an ST70. SeaTalkNG Raymarine’s proprietary cable system for use in NMEA 2000 networks. The design provides two advantages. First, the connector collars are retained on the product which allows for a smaller cable diameter making installations easier. More importantly, the cable can include a sixth wire which allows for backward compatibility with SeaTalk1 equipment. Products with SeaTalkNG connectors can be used on NMEA 2000 networks that use Devicenet cabling through simple connector adapters and conversely equipment with Devicenet connectors can be used on NMEA 2000 networks that use SeaTalkng cabling through simple connector adapters.

Adapter Cable Raymarine adapter spur cable to connect an E-series display to a SeaTalkngnetwork, using the SeaTalk2 port on the back of the E-Series, 1.5M

gWind™ Masthead To Nexus Instrument Connector Adapter Cable Use Garmin's connector adapter cable to retrofit your gWind transducer for the Nexus network using your existing Nexus mast cable. Compaticle Devices: gWind™ Race Transducer gWind™ Transducer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

USB-C to USB-A Female Adapter Cable Use this cable to connect a male USB-A cable to the USB C-port on your compatible GPSMAP® 9000 series chartplotter.

USB-C to Micro USB Adapter Cable Use this cable to connect a male Micro USB to the USB-C port on your compatible GPSMAP® 9000 series chartplotter. This cable also can be used for the USB Card reader.

Adapter Cable for Axiom Pro with CP370 Transducer Used to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro.

12-Pin To Dual 4-Pin Transducer Y-Cable Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.