|
Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM
Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.
Features:
12 VDC
8' [2.4 m] Cable w/ Battery Clips
CE
Hose kit
3.5 Gal [13L] Storage Container
Uses: Oil changing, winterizing and liquid transfer
|
220.88 |
|
|
Livewell Fill Valve w/ 3/4" & 1-1/8" Fittings
The fill valve you've been waiting for! The SHURFLO livewell fill valve is the only full port, adjustable, low profile fill valve which creates an energized environment for ultimate bait performance. Made of tough high density nylon, the SHURFLO livewell fill valve is adjustable to reach any desired flow rate.
Features:
Adjustable Flow Valve
3/4" and 1-1/8" Full Port Fittings Included
Low Profile Design
Nylon Construction
CE Listed
|
36.56 |
|
|
AQUA KING™ II Junior Fresh Water Pump - 12 VDC, 2.0 GPM
SHURFLO's 4128 fresh water pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump, the 4128 pump is constructed for smooth flow. The 4128 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.
Features:
2901 Replacement
Sealed Switch
Sealed Motor
Corrosion Resistant Electro Coated Motor
4 Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Adjustable Switch
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
|
129.32 |
|
|
AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPM
SHURFLO's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.
Features:
3901 Replacement
Sealed Switch
Sealed Motor
Corrosion Resistant Electro Coated Motor
4 Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Adjustable Switch
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
|
154.79 |
|
|
AQUA KING™ II Standard Fresh Water Pump - 24 VDC, 3.0 GPM
Shurflo's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, ensuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected, and can run dry without damage.
Features:
3901 replacement
Sealed switch
Sealed motor
Corrosion-resistant electro-coated motor
4 independent chambers
Built-in check valve
Co-molded diaphragm
Adjustable switch
Self-priming up to 6 Feet
Dry run capability
Thermally protected
Ignition-protected, CE
Specifications:
Voltage: 24 VDC
Flow Rate: 3.0 GPM (11.35 LPM)
Amps: 3.8
Shut-Off Pressure: 55 PSI (3.8 BAR)
|
172.54 |
|
|
500 Bilge Pump - 12 VDC, 500 GPH
Quality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
29.23 |
|
|
700 Bilge Pump - 12 VDC, 700 GPH
Quality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
41.00 |
|
|
1000 Bilge Pump - 12 VDC, 1000 GPH
Quality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
46.36 |
|
|
Standard Utility Pump - 12 VDC, 1.5 GPM
Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, the general purpose pumps are self-priming, easy to install and are extremely versatile.
Features:
12 VDC
Ignition Protected
BUNA Valves
CE
7' [2.1m] Prime
Hose kit Included
Uses: Winterizing, Oil Change and Liquid Transfers
|
179.16 |
|
|
Premium Utility Pump - 12 VDC, 1.5 GPM
Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.
Features:
12 VDC
Ignition Protected
BUNA Valves
CE
7' [2.1m] Prime
8' Cable with Battery Clips
Hose kit Included
Uses: Winterizing, Oil Change and Liquid Transfers
|
208.19 |
|
|
380 Bilge Pump - 12 VDC, 380 GPH
Quality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
25.04 |
|
|
AQUA KING™ II Supreme Fresh Water Pump - 12 VDC - 5.0 GPM
SHURFLO's AQUA KING II fresh water pump is designed for boats with multi-fixtures providing "Just like home" shower pressure, and can operate at lower flow conditions with low cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With a heavy duty motor built to withstand the tough marine environment, this motor features an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING II fresh water pump can run dry without damage. Inlet strainer and 1/2" hose barb fittings are included. Ignition protected. Thermally protected.
Features:
5901 Replacement
Sealed Switch
Sealed Motor
Corrosion Resistant Electro
Coated Motor
Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Adjustable Switch & By-Pass
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
|
363.28 |
|
|
1500 Bilge Pump - 12 VDC, 1500 GPH
Heavy duty and built to last. SHURFLOs 1500 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
122.17 |
|
|
2000 Bilge Pump - 12 VDC, 2000 GPH
Heavy duty and built to last. SHURFLOs 2000 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.
Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
|
158.74 |
|
|
Lower Housing Replacement Kit - 3.0 CAM
Includes diaphram and drive assembly
For the Following Pumps:
Silencer - 12VDC
Premium - 12VDC
Standard Blaster™ - 12VDC
Standard Blaster™ - 24VDC
ProBlaster™ - 12VDC
Pro Baitmaster™ - 12VDC
Pro Baitmaster™ - 24VDC
|
33.50 |
|