|
Finish Thompson A101983-16 PVDF Impeller Head Kit
|
173.68 |
|
|
FINISH THOMPSON A100198 IMPELLER 3.5" PVDF
|
452.00 |
|
|
FINISH THOMPSON KC5PCVN27 PUMP HEAD
|
517.50 |
|
|
FINISH THOMPSON A101521 STATIC PROTECTION KIT
Static Protection Kit
Finish Thompson’s Static Protection Kit (SPK) is recommended to help prevent the accumulation of static charge when transferring flammable or combustible liquids. It is to be used in conjunction with stainless steel drum pumps and air or explosion-proof electric motors.
When pumping flammables at high flow rates, a static charge can build up due to the high velocity at which the fluid is moving. Static charge can become a spark capable of igniting flammable liquids. This is rare occurrence, but it is wise to prevent the possibility by using the SPK. Keeping the velocity of the liquid low significantly reduces these hazards. Our metal tube pumps combined with an appropriate motor and static protection kit is an engineered package designed to provide customers with a high level of protection when pumping flammable liquids.
The SPK is a conductive, 4-foot long x 1-inch I.D. cross-linked polyethylene discharge hose with grounding cables to bond the pump, motor, hose and receiving drum. It will also limit the pumps output velocity to 3-feet/second maximum (about 7 gpm through a 1’’ hose), which will reduce static build up.
|
327.60 |
|
|
FINISH THOMPSON AC4STS1V350B015C 3/4 X 1/2 316SS VTN PUMP HEAD ONLY
Applications
Chemical processing
Printed circuit boards
Pharmaceutical
Waste water treatment
Port Sizes
(Suction x Discharge) &
Connection Types:
0.75 in x 0.5 in NPT/BSP
0.75 x 0.5 in ANSI 150# Flanges
1 in x 1 in ANSI 150# Flanges
1.5 x 0.75 electropolished Tri-clamps
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
100 psi (6.9 bar)
@3450 RPM
@2900 RPM
Flow Range*:
3 to 39.1 gpm
0.68 to 7 m3/h
Maximum Head:
59.6 ft
11.7 m
Power Range**:
0.25 to 1 hp
0.1 to 0.21 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Stainless Steel Mechanically Sealed
Configuration:
Horizontal
Construction Materials:
316 Stainless Steel
O-ring Materials:
FKM, EPDM, Buna, or PTFE Encapsulated Silicone
Seal Type:
Bellows Type 21
Seal Materials:
Carbon, Ceramic, SiC, FKM, EPDM, Buna, or Kalrez®
Maximum Temperature:
300º F (149º C)
|
730.00 |
|
|
FINISH THOMPSON AC5STS1V400B015C 1 1/4X3/4 316SS PUMP HEAD ONLY VTN
Applications
Chemical processing
Printed circuit boards
Pharmaceutical
Waste water treatment
Sizes
(Suction x Discharge) &
Connection Types:
1.5 in x 1.25 in NPT or BSP
1.25 in x 0.75 in NPT or BSP
2 in x 1.5 in NPT or BSP
1.25 in x 0.75 in ANSI 150# Flanges
1.5 in x 1 in ANSI 150# Flanges
1.5 in x 1.5 in ANSI 150# Flanges
2 in x 1.5 in ANSI 150# Flanges
1.5 in x 1 in Electropolished Tri-clamps
1.5 in x 1.5 in Electropolished Tri-clamps
2 in x 1.5 in Electropolished Tri-clamps
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
100 psi (6.9 bar)
@3450 RPM
@2900 RPM
Flow Range*:
5 to 145 gpm
1.14 to 26.3 m3/h
Maximum Head:
88.5 ft
19 m
Power Range**:
0.5 to 3.1 hp
0.21 to 1 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Stainless Steel Mechanically Sealed
Configuration:
Horizontal
Construction Materials:
316 Stainless Steel
O-ring Materials:
FKM, EPDM, Buna, or PTFE Encapsulated Silicone
Seal Type:
Bellows Type 21
Seal Materials:
Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®
Maximum Temperature:
300º F (149º C)
|
836.16 |
|
|
FINISH THOMPSON AC6HJS1V620B0118 HIGH HEAD 1 1/4 X 3/4 316SS
Applications
Chemical processing
Printed circuit boards
Pharmaceutical
Waste water treatment
Port Sizes
(Suction x Discharge) &
Connection Types:
1.25 x 0.75 NPT or BSP
1.5 x 1 Electropolished Tri-clamps
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
100 psi (6.9 bar)
@3450 RPM
@2900 RPM
Flow Range*:
3 to 100 gpm
0.68 to 18.2 m3/h
Maximum Head:
144.1 ft
31.1 m
Power Range**:
2 to 2.8 hp
0.81 to 1.44 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Stainless Steel Mechanically Sealed High Head
Configuration:
Horizontal
Construction Materials:
316 Stainless Steel
O-ring Materials:
FKM, EPDM, Buna, or PTFE Encapsulated Silicone
Seal Type:
Bellows Type 21
Seal Materials:
Carbon, Ceramic, FKM, EPDM, SiC, Buna, or Kalrez®
Maximum Temperature:
300º F (149º C)
|
2583.36 |
|
|
FINISH THOMPSON DB10P PUMP END POLY/CARB/VIT/56C
Applications
Water and wastewater
Electronics
Pharmaceuticals
Wet scrubber
Pulp and paper
Finish Thompson DB Series Pump
FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.
Finish Thompson Pumps: Centrifugal - DB10 Model
Motor @ 3450 RPM:
0.33 HP
Motor @ 2900 RPM:
0.34 kW
Max specific gravity:
1.8
Suction Port:
1.50 in
Discharge Port:
1.50 in
Impeller Diameter:
3 in (8.9 cm for 50 Hz model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
67.0 gpm
16.9 m3/hr
Max head
28.0 ft
9.8 m
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 63, 71, 80, 90, w/B14 or B5
Connection type:
NPT, BSP, Flange, Union
Magnet set:
6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW)
Max pressure:
80 psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
PART NO.
DESCRIPTION
DB10P
Pump End (PP)
DB10PW
Wet End (PP)
DB10V
Pump (PVDF)
DB10VW
Wet End (PVDF)
|
929.70 |
|
|
FINISH THOMPSON DB6HP PUMP END POLY/CARB/VIT/56C
Finish Thompson Centrifugal Pump End Model DB6HP
Motor @ 3450 RPM:
0.21 HP
Motor @ 2900 RPM:
0.16 HP
Max specific gravity:
1.8
Suction Port:
1.00 in
Discharge Port:
1.00 in
Impeller Diameter:
3.12 in (8.9 cm for 50 Hz model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
31.0 gpm
7.9 m3/hr
Max head
31.0 ft.
9.3 m
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 63, 71, 80, 90, w/B14 or B5
Connection type:
NPT or BSPNPT, BSP, Flange, Union
Magnet set:
6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW)
Max pressure:
80 psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
Polypropylene
PVDF
ETFE Lined Ductile Iron
316SS
Max temp.[º F]:
180
220
n/a
n/a
Max temp.[º C]:
82
104
n/a
n/a
PART NO.
DESCRIPTION
DB6HP
Pump (PP)
DB6HPW
Wet End (PP)
DB6HV
Pump (PVDF)
DB6HVW
Wet End (PVDF)
|
736.88 |
|
|
FINISH THOMPSON DB11P PUMP POLY CARB/VIT 56C
Applications
Chemical processing
Electronics
Pump cleaning solutions
Printed circuit boards
Pulp and paper
Finish Thompson Pumps: Centrifugal - DB11 Model
Motor @ 3450 RPM:
0.72 HP
Motor @ 2900 RPM:
0.73 kW
Max specific gravity:
1.8
Suction Port:
2.00 in
Discharge Port:
1.50 in
Impeller Diameter:
3.63 in (10.8 cm for 50 Hz model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
78.0 gpm
21.4 m3/hr
Max head
41.0 ft.
14.6 m
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5
Connection type:
NPT, BSP, Flange, Union
Magnet set:
6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW)
Max pressure:
90, (50 for Gylon) psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket)
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
Polypropylene
PVDF
ETFE Lined Ductile Iron
316SS
Max temp.[º F]:
180
220
n/a
n/a
Max temp.[º C]:
82
104
n/a
n/a
PART NO.
DESCRIPTION
DB11P
Pump (PP)
DB11PW
Wet End (PP)
DB11V
Pump (PVDF)
DB11VW
Wet End (PVDF)
ZZZ0002
DB11/15, SP1115 ceramic bushing
ZZZ0011
DB11, SP11 magnet upgrade 8-pole (pump end)
ZZZ0012
DB11, SP11 magnet upgrade 8-pole (wet end)
ZZZ0015
DB11, SP11 magnet upgrade 10-pole (pump end)
ZZZ0016
DB11, SP11 magnet upgrade 10-pole (wet end)
ZZZ0025
DB11/15, SP11/15 union fitting polypropylene
|
1798.20 |
|
|
FINISH THOMPSON DB15P PUMP POLY CARBON VITON 56C
Applications
Bio-filtration
Electroplating
DI water
Electronics
Mining
Finish Thompson Pumps: Centrifugal - DB15 Model
Motor @ 3450 RPM:
1.40 HP
Motor @ 2900 RPM:
0.00 kW
Max specific gravity:
1.8
Suction Port:
2.00 in
Discharge Port:
1.50 in
Impeller Diameter:
4.25 in (50 Hz N/A for this model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
112.0 gpm
n/a
Max head
63.0 ft.
n/a
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5
Connection type:
NPT, BSP, Flange, Union
Magnet set:
6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW)
Max pressure:
90, (50 for Gylon) psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket)
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
Polypropylene
PVDF
ETFE Lined Ductile Iron
316SS
Max temp.[º F]:
180
220
n/a
n/a
Max temp.[º C]:
82
104
n/a
n/a
PART NO.
DESCRIPTION
DB15P
Pump (PP)
DB15PW
Wet End (PP)
DB15V
Pump (PVDF)
DB15VW
Wet End (PVDF)
ZZZ0017
DB15, SP15 magnet upgrade 10-pole (pump end)
ZZZ0018
DB15, SP15 magnet upgrade 10-pole (wet end)
|
1950.30 |
|
|
FINISH THOMPSON DB6P PUMP END POLY/CARB/VIT/56C
Applications
Pulp & Paper
Chemical Processing
Heat Exchanger
Circuit Board Printing
Finish Thompson Centrifugal DB6 Model Pump
Motor @ 3450 RPM:
0.17 HP
Motor @ 2900 RPM:
0.18 HP
Max specific gravity:
1.8
Suction Port:
1.00 in
Discharge Port:
1.00 in
Impeller Diameter:
2.5 in (7.6 cm for 50 Hz model)
Impeller Type:
Closed
@ 3450 RPM
@ 2900 RPM
Max flow
31.0 gpm
7.9 m3/hr
Max head
21.0 ft.
7.5 m
Type:
Sealless
Configuration:
Horizontal
Motor frame:
56C, 145TC, 63, 71, 80, 90, w/B14 or B5
Connection type:
NPT or BSPNPT, BSP, Flange, Union
Magnet set:
6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW)
Max pressure:
80 psi
Construction materials:
Glass-filled Polypropylene, Carbon-filled PVDF
O-ring Material:
Viton, EPDM, Simriz®, Kalrez®
Bushing Material:
Carbon, PTFE, Ceramic, silicon carbide
Polypropylene
PVDF
ETFE Lined Ductile Iron
316SS
Max temp.[º F]:
180
220
n/a
n/a
Max temp.[º C]:
82
104
n/a
n/a
PART NO.
DESCRIPTION
DB6P
Pump (PP)
DB6PW
Wet End (PP)
DB6V
Pump (PVDF)
DB6VW
Wet End (PVDF)
J101460-1
DB6 - 22 Spare Part
J102789
DB6 - 22 Spare Part
J103617-1
DB6 - 22 Spare Part
J103637
DB6 - 22 Spare Part
J103638
DB6 - 22 Spare Part
J103780
DB6 - 22 Spare Part
|
647.81 |
|
|
FINISH THOMPSON PFV-40 DRUM PUMP 40" PF PVDF
Sealless, High Performance Drum Pump
Unique double suction impeller provides high flow and high head.
Featuring multiple material options and connections, the PF Series is designed for container-to-container transfer of acids, corrosives, and chemicals.
Features include:
Polypropylene, PVDF, or 316SS tubes
Interchangeable with motors
Greater flow control with variable orifice discharge (PFM/PFP/PFV only)
Up to 2000 cP with M58P/M59P motors
FDA-compliant option
Built-in hose and cord clips (PFM/PFP/PFV only)
Available Lengths:
27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter:
2 in (5.1 cm)
Discharge Size:
1 in (2.54 cm)
Discharge Type:
Hose barb w/ variable orifice
Hose Size:
1 in (2.54 cm)
Electric Motor
Air Motor
Maximum Flow:
40 gpm (151 lpm)
22 gpm (83 lpm)
Maximum Head:
80 ft (24 m)
38 ft (11.6 m)
Maximum Specific Gravity:
1.8
1.8
Maximum Viscosity:
2000 cP
330 cP
Tube Material:
PVDF
Shaft Material:
Alloy 625
O-ring Material:
FKM
Impeller Material:
PVDF
Maximum Temperature*:
120º F (49º C)
Minimum Temperature:
35º F (1.7º C)
*PFV-72 maximum temperature is 115º F (46º C)
|
955.80 |
|
|
FINISH THOMPSON PFV-48 DRUM PUMP 48" PF PVDF
Sealless, High Performance Drum Pump
Unique double suction impeller provides high flow and high head.
Features include:
Polypropylene, PVDF, or 316SS tubes
Interchangeable with motors
Greater flow control with variable orifice discharge (PFM/PFP/PFV only)
Up to 2000 cP with M58P/M59P motors
FDA-compliant option
Built-in hose and cord clips (PFM/PFP/PFV only)
Available Lengths:
27, 40, 48, 60, 72 in (69, 102, 122, 152, 183 cm)
Tube Diameter:
2 in (5.1 cm)
Discharge Size:
1 in (2.54 cm)
Discharge Type:
Hose barb w/ variable orifice
Hose Size:
1 in (2.54 cm)
Electric Motor
Air Motor
Maximum Flow:
40 gpm (151 lpm)
22 gpm (83 lpm)
Maximum Head:
80 ft (24 m)
38 ft (11.6 m)
Maximum Specific Gravity:
1.8
1.8
Maximum Viscosity:
2000 cP
330 cP
Tube Material:
PVDF
Shaft Material:
Alloy 625
O-ring Material:
FKM
Impeller Material:
PVDF
Maximum Temperature*:
120º F (49º C)
Minimum Temperature:
35º F (1.7º C)
*PFV-72 maximum temperature is 115º F (46º C)
|
1068.30 |
|
|
FINISH THOMPSON DB10V-T PUMP END, PVDF/TEFLON 56C
Applications
Water and wastewater
Electronics
Pharmaceuticals
Wet scrubber
Pulp and paper
Suction Port Size:
1.5 in
Discharge Port Size:
1.5 in
Connection Types:
NPT, BSP, Flange, or Union
Maximum Specific Gravity:
up to 1.8
Maximum Working Pressure:
80 psi (5.5 bar)
@3450 RPM
@2900 RPM
Flow Range*:
0.5 to 96 gpm
0.114 to 20.7 m3/h
Maximum Head:
51 ft
14.2 m
Power Range**:
0.17 to 0.96 hp
0.15 to 0.70 kW
*See Performance tab for individual impeller diameter capability
**Smallest to largest impeller on 1.0 s.g.
Type:
Sealless Mag Drive
Configuration:
Horizontal
Construction Materials:
Polypropylene or PVDF
O-ring Materials:
FKM, EPDM, Simriz®, or Kalrez®
Bushing Materials:
Carbon, PTFE, Ceramic, or SiC
Shaft Materials:
Ceramic, Hastelloy® C, or SiC
Polypropylene
PVDF
Maximum Temperature:
180º F (82º C)
220º F (104º C)
Kalrez® is a registered trademark of DuPont Performance Elastomers
Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK
Hastelloy® C is a registered trademark of Haynes International, Inc.
|
1224.00 |
|