FINISH THOMPSON A101981-7 IMPELLER HOUSING FOR H2N

FINISH THOMPSON A101981-9 Housing - PVDF

FINISH THOMPSON A101014-1 IMPELLER HOUSING with THRUST RING Polypropylene NPT Impeller Housing with Thrust Ring      

FINISH THOMPSON DB22-P Finish Thompson DB22P Pump End Only FTI DB22 Magnetic Drive Centrifugal DB Series Sealless Pumps, 2" Suction, 2" Discharge, FKM O-Ring, Polypropylene, 221 GPM, 90 PSI Max Pressure, 201 Max Feet of Head.   Bushing: Carbon Connection Type: NPT Discharge NPT (Inches): 2" Heads To (Feet): 201 Impeller Size (Inches): 7.25" (7 1/4") Magnet: 8-pole Material:Polypropylene (PPG) Maximum Flow (GPM): 221  Maximum Operating Temperature: 180°F (82°C) Maximum Pressure (PSI): 90 PSI Motor Frame Size: 184TC Pressure Rating BAR: 6.2 bar Spec. Gravity: up to 1.8 Suction NPT (Inches): 2" Valve/Seat/O-Ring: FKM    Applications Chemical transfer Anodizing Rinse water & waste water Pickling chemicals   Pulp and paper    

FINISH THOMPSON M100018-1 PFP IMPELLER HOUSING

FINISH THOMPSON DB7P PUMP END POLY/CARB/VIT/56C Applications Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing Finish Thompson DB7P Pump End FTI DB7 Magnetic Drive Centrifugal DB Series Sealless Pumps, 1 1/2" Suction, 1 1/2" Discharge, FKM O-Ring, Polypropylene, 69 GPM, 80 PSI Max Pressure, 34 Max Feet of Head   BushingCarbonConnection TypeNPT     Discharge NPT (Inches)1 1/2"     Heads To (Feet)34     Impeller Size (Inches)3.18"     Magnet6-pole     MaterialPolypropylene     Maximum Flow (GPM)69      MaxImum Operating Temperature180°F (82°C)     Maximum Pressure (PSI)80 PSI     Motor Frame Size56C     Pressure Rating BAR5.5 bar     Spec. Gravityup to 1.8     Suction NPT (Inches)1 1/2"   Valve/Seat/O-RingFKM

FINISH THOMPSON A101470 ADAPTER Finish Thompson A101470 Motor Adapters Adapts FTI pumps to Lutz, Standard or Flux motors FTI to Lutz/Standard - PVC FTI Pump Motor Adapters  

FINISH THOMPSON 106299 EPDM HOUSING O'RING, DB6-DB10

FINISH THOMPSON J100019 O'RING HOUSING VITON

FINISH THOMPSON M100109-1 POLY PRO HOUSING

FINISH THOMPSON M101612-1 PFP HOUSING COVER

FINISH THOMPSON A100198 IMPELLER 3.5" PVDF

FINISH THOMPSON A101521 STATIC PROTECTION KIT Static Protection Kit Finish Thompson’s Static Protection Kit (SPK) is recommended to help prevent the accumulation of static charge when transferring flammable or combustible liquids. It is to be used in conjunction with stainless steel drum pumps and air or explosion-proof electric motors.   When pumping flammables at high flow rates, a static charge can build up due to the high velocity at which the fluid is moving. Static charge can become a spark capable of igniting flammable liquids. This is rare occurrence, but it is wise to prevent the possibility by using the SPK. Keeping the velocity of the liquid low significantly reduces these hazards. Our metal tube pumps combined with an appropriate motor and static protection kit is an engineered package designed to provide customers with a high level of protection when pumping flammable liquids.   The SPK is a conductive, 4-foot long x 1-inch I.D. cross-linked polyethylene discharge hose with grounding cables to bond the pump, motor, hose and receiving drum. It will also limit the pumps output velocity to 3-feet/second maximum (about 7 gpm through a 1’’ hose), which will reduce static build up.

FINISH THOMPSON A101761-1 PVDF IMPELLER 6 1/8"

FINISH THOMPSON A101938 3.5 IMPELLER