FINISH THOMPSON A101471 FLUX ADAPTER

FINISH THOMPSON A101470 ADAPTER Finish Thompson A101470 Motor Adapters Adapts FTI pumps to Lutz, Standard or Flux motors FTI to Lutz/Standard - PVC FTI Pump Motor Adapters  

FINISH THOMPSON DB10P PUMP END POLY/CARB/VIT/56C   Applications Water and wastewater Electronics Pharmaceuticals Wet scrubber Pulp and paper   Finish Thompson DB Series Pump FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.   Finish Thompson Pumps: Centrifugal - DB10 Model Motor @ 3450 RPM: 0.33 HP Motor @ 2900 RPM: 0.34 kW Max specific gravity: 1.8 Suction Port: 1.50 in Discharge Port: 1.50 in Impeller Diameter: 3 in (8.9 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 67.0 gpm 16.9 m3/hr Max head 28.0 ft 9.8 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 63, 71, 80, 90, w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW) Max pressure: 80 psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez® Bushing Material: Carbon, PTFE, Ceramic, silicon carbide PART NO. DESCRIPTION DB10P Pump End (PP) DB10PW Wet End (PP) DB10V Pump (PVDF) DB10VW Wet End (PVDF)

FINISH THOMPSON A101991-3 MOTOR ADAPTER 5.5,6,7,8,10

FINISH THOMPSON M100088 BUNG ADAPTER GALV STEEL

FINISH THOMPSON M100091 BUNG ADAPTER POLYPRO

FINISH THOMPSON M100094 BUNG ADAPTER 316 SS

FINISH THOMPSON M102051-2 AC8 MOTOR ADAPTER 21JM

FINISH THOMPSON DB22-P Finish Thompson DB22P Pump End Only FTI DB22 Magnetic Drive Centrifugal DB Series Sealless Pumps, 2" Suction, 2" Discharge, FKM O-Ring, Polypropylene, 221 GPM, 90 PSI Max Pressure, 201 Max Feet of Head.   Bushing: Carbon Connection Type: NPT Discharge NPT (Inches): 2" Heads To (Feet): 201 Impeller Size (Inches): 7.25" (7 1/4") Magnet: 8-pole Material:Polypropylene (PPG) Maximum Flow (GPM): 221  Maximum Operating Temperature: 180°F (82°C) Maximum Pressure (PSI): 90 PSI Motor Frame Size: 184TC Pressure Rating BAR: 6.2 bar Spec. Gravity: up to 1.8 Suction NPT (Inches): 2" Valve/Seat/O-Ring: FKM    Applications Chemical transfer Anodizing Rinse water & waste water Pickling chemicals   Pulp and paper    

FINISH THOMPSON DB7P PUMP END POLY/CARB/VIT/56C Applications Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing Finish Thompson DB7P Pump End FTI DB7 Magnetic Drive Centrifugal DB Series Sealless Pumps, 1 1/2" Suction, 1 1/2" Discharge, FKM O-Ring, Polypropylene, 69 GPM, 80 PSI Max Pressure, 34 Max Feet of Head   BushingCarbonConnection TypeNPT     Discharge NPT (Inches)1 1/2"     Heads To (Feet)34     Impeller Size (Inches)3.18"     Magnet6-pole     MaterialPolypropylene     Maximum Flow (GPM)69      MaxImum Operating Temperature180°F (82°C)     Maximum Pressure (PSI)80 PSI     Motor Frame Size56C     Pressure Rating BAR5.5 bar     Spec. Gravityup to 1.8     Suction NPT (Inches)1 1/2"   Valve/Seat/O-RingFKM

FINISH THOMPSON M6 AIR MOTOR Model Certification Requirements Output (KW) RPM Maximum Viscosity   M6   CE 80-100psi@15-32cfm 400 300-9,000     For use with Finish Thompson Inc. FTI drum pumps. Drum pump motors are available as electric or air pneumatic motors. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.   CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES) without the static protection kit .   Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.   Please allow about two weeks for delivery.

FINISH THOMPSON M6 AIR MOTOR Model Certification Requirements Output (KW) RPM Maximum Viscosity   M6X   CE 80-100psi@15-32cfm 600 300-9,000     For use with Finish Thompson Inc. FTI drum pumps. This drum pump motor is a air pneumatic motor. Most motors and drum pump tubes are interchangeable. Simply disconnect one from the other.   CAUTION: When pumping flammables, use only air or explosion-proof electric motors on stainless steel (DO NOT PLASTIC TUBES without the static protection kit.)   Non-electrical air operation means the possibility of explosion from igniting flammable gases is reduced.   Air motor performance will depend upon user's compressor and system setup.   Please allow about two weeks for delivery.

FINISH THOMPSON BTS-40 40" HIGH VISC SS DRUM PUMP Finish Thompson Drum/Barrel Pump - BTS Model Outer Material: 316 stainless steel Diameter: 2" (51 mm) Seal: graphite filled PTFE Shaft Material: 316 stainless steel Internals: PTFE Hose Size: 1 1/2" (40 mm) Max Temperature: 200° F (93° C)   ELECTRIC AIR Max Flow: 10 gpm 2.3 m3/hr 10 gpm 2.3 m3/hr Max Head: 200' 61 m 200' 61 m Max Viscosity: 15,000 cP 15,000 cP Length Weight Part No. Box Dim. 40" (102 cm) 11 lbs (5 kg) DBTS037 47" × 4" × 9"  (119 × 10 × 23 cm) PART NO. DESCRIPTION   DBTS037 BTS-40  

FINISH THOMPSON DB11P PUMP POLY CARB/VIT 56C   Applications   Chemical processing Electronics Pump cleaning solutions Printed circuit boards Pulp and paper     Finish Thompson Pumps: Centrifugal - DB11 Model Motor @ 3450 RPM: 0.72 HP Motor @ 2900 RPM: 0.73 kW Max specific gravity: 1.8 Suction Port: 2.00 in Discharge Port: 1.50 in Impeller Diameter: 3.63 in (10.8 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 78.0 gpm 21.4 m3/hr Max head 41.0 ft. 14.6 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW) Max pressure: 90, (50 for Gylon) psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket) Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB11P Pump (PP) DB11PW Wet End (PP) DB11V Pump (PVDF) DB11VW Wet End (PVDF) ZZZ0002 DB11/15, SP1115 ceramic bushing ZZZ0011 DB11, SP11 magnet upgrade 8-pole (pump end) ZZZ0012 DB11, SP11 magnet upgrade 8-pole (wet end) ZZZ0015 DB11, SP11 magnet upgrade 10-pole (pump end) ZZZ0016 DB11, SP11 magnet upgrade 10-pole (wet end) ZZZ0025 DB11/15, SP11/15 union fitting polypropylene

FINISH THOMPSON DB15P PUMP POLY CARBON VITON 56C   Applications   Bio-filtration Electroplating DI water Electronics Mining   Finish Thompson Pumps: Centrifugal - DB15 Model Motor @ 3450 RPM: 1.40 HP Motor @ 2900 RPM: 0.00 kW Max specific gravity: 1.8 Suction Port: 2.00 in Discharge Port: 1.50 in Impeller Diameter: 4.25 in (50 Hz N/A for this model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 112.0 gpm n/a Max head 63.0 ft. n/a Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW) Max pressure: 90, (50 for Gylon) psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket) Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB15P Pump (PP) DB15PW Wet End (PP) DB15V Pump (PVDF) DB15VW Wet End (PVDF) ZZZ0017 DB15, SP15 magnet upgrade 10-pole (pump end) ZZZ0018 DB15, SP15 magnet upgrade 10-pole (wet end)