FINISH THOMPSON A101008-2 BARRIER with SPINDLE PVDF

FINISH THOMPSON A101008-1 BARRIER W/SPINDLE PP

FINISH THOMPSON A101981-9 Housing - PVDF

FINISH THOMPSON EFV-40 KIT PVDF PUMP-MOTOR COMBO

FINISH THOMPSON A101703-2 PVDF BARRIER

FINISH THOMPSON A102746-13 6 POLE HUB PVDF/PTFE

FINISH THOMPSON KC6VCN315C KC 6 PVDF/CARB 56C

Finish Thompson 106283-2 Magnetic Drive Assembly B6-10 Finish Thompson 106283-2 56C frame, 10-pole, Drive Magnet Assembly with Retaining Ring

FINISH THOMPSON A100002-2 IMPELLER ASSEMBLY Finish Thompson Drum Pump Impeller Assembly, PFP, PFV Barrel pump impeller for all PFP, PFV pumps.

FINISH THOMPSON M101603-2 PFP BEARING GUIDE

FINISH THOMPSON M102051-2 AC8 MOTOR ADAPTER 21JM

FINISH THOMPSON DB10P PUMP END POLY/CARB/VIT/56C   Applications Water and wastewater Electronics Pharmaceuticals Wet scrubber Pulp and paper   Finish Thompson DB Series Pump FTI's DB Series Magnetic Drive Pumps are the product of advanced engineering CFD design software and superior magnetic flux technology. Using powerful neodymium magnetic technology, the DB sealless mag drive pumps are an ideal replacement for mechanical sealed pumps in corrosive duty applications.   Finish Thompson Pumps: Centrifugal - DB10 Model Motor @ 3450 RPM: 0.33 HP Motor @ 2900 RPM: 0.34 kW Max specific gravity: 1.8 Suction Port: 1.50 in Discharge Port: 1.50 in Impeller Diameter: 3 in (8.9 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 67.0 gpm 16.9 m3/hr Max head 28.0 ft 9.8 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 63, 71, 80, 90, w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW) Max pressure: 80 psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez® Bushing Material: Carbon, PTFE, Ceramic, silicon carbide PART NO. DESCRIPTION DB10P Pump End (PP) DB10PW Wet End (PP) DB10V Pump (PVDF) DB10VW Wet End (PVDF)

FINISH THOMPSON DB6HP PUMP END POLY/CARB/VIT/56C Finish Thompson Centrifugal Pump End Model DB6HP Motor @ 3450 RPM: 0.21 HP Motor @ 2900 RPM: 0.16 HP Max specific gravity: 1.8 Suction Port: 1.00 in Discharge Port: 1.00 in Impeller Diameter: 3.12 in (8.9 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 31.0 gpm 7.9 m3/hr Max head 31.0 ft. 9.3 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 63, 71, 80, 90, w/B14 or B5 Connection type: NPT or BSPNPT, BSP, Flange, Union Magnet set: 6 pole to 1/2 HP (.37 kW), 8 pole to 1 HP (.75 kW), 10 pole to 2 HP (1.5 kW) Max pressure: 80 psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez® Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB6HP Pump (PP) DB6HPW Wet End (PP) DB6HV Pump (PVDF) DB6HVW Wet End (PVDF)

FINISH THOMPSON DB10V-T PUMP END, PVDF/TEFLON 56C   Applications Water and wastewater Electronics Pharmaceuticals Wet scrubber Pulp and paper   Suction Port Size:  1.5 in  Discharge Port Size:  1.5 in  Connection Types:  NPT, BSP, Flange, or Union  Maximum Specific Gravity:  up to 1.8  Maximum Working Pressure:  80 psi (5.5 bar)      @3450 RPM  @2900 RPM  Flow Range*:  0.5 to 96 gpm  0.114 to 20.7 m3/h  Maximum Head:  51 ft  14.2 m  Power Range**:  0.17 to 0.96 hp  0.15 to 0.70 kW *See Performance tab for individual impeller diameter capability **Smallest to largest impeller on 1.0 s.g.    Type:  Sealless Mag Drive  Configuration:  Horizontal  Construction Materials:  Polypropylene or PVDF  O-ring Materials:  FKM, EPDM, Simriz®, or Kalrez®  Bushing Materials:  Carbon, PTFE, Ceramic, or SiC  Shaft Materials:  Ceramic, Hastelloy® C, or SiC      Polypropylene  PVDF  Maximum Temperature:  180º F (82º C)  220º F (104º C) Kalrez® is a registered trademark of DuPont Performance Elastomers Simriz® Perfluoroelastomer is a registered trademark of the Simrit® division of Freudenberg-NOK  Hastelloy® C is a registered trademark of Haynes International, Inc.

FINISH THOMPSON DB11P PUMP POLY CARB/VIT 56C   Applications   Chemical processing Electronics Pump cleaning solutions Printed circuit boards Pulp and paper     Finish Thompson Pumps: Centrifugal - DB11 Model Motor @ 3450 RPM: 0.72 HP Motor @ 2900 RPM: 0.73 kW Max specific gravity: 1.8 Suction Port: 2.00 in Discharge Port: 1.50 in Impeller Diameter: 3.63 in (10.8 cm for 50 Hz model) Impeller Type: Closed   @ 3450 RPM @ 2900 RPM Max flow 78.0 gpm 21.4 m3/hr Max head 41.0 ft. 14.6 m Type: Sealless Configuration: Horizontal Motor frame: 56C, 145TC, 184TC, 80, 90, 100, 112 w/B14 or B5 Connection type: NPT, BSP, Flange, Union Magnet set: 6 pole to 2 HP (1.5 kW), 8 pole to 3 HP (2.2 kW), 10 pole to 5 HP (4 kW) Max pressure: 90, (50 for Gylon) psi Construction materials: Glass-filled Polypropylene, Carbon-filled PVDF O-ring Material: Viton, EPDM, Simriz®, Kalrez®, Gylon® (gasket) Bushing Material: Carbon, PTFE, Ceramic, silicon carbide   Polypropylene PVDF ETFE Lined Ductile Iron 316SS Max temp.[º F]: 180 220 n/a n/a Max temp.[º C]: 82 104 n/a n/a PART NO. DESCRIPTION DB11P Pump (PP) DB11PW Wet End (PP) DB11V Pump (PVDF) DB11VW Wet End (PVDF) ZZZ0002 DB11/15, SP1115 ceramic bushing ZZZ0011 DB11, SP11 magnet upgrade 8-pole (pump end) ZZZ0012 DB11, SP11 magnet upgrade 8-pole (wet end) ZZZ0015 DB11, SP11 magnet upgrade 10-pole (pump end) ZZZ0016 DB11, SP11 magnet upgrade 10-pole (wet end) ZZZ0025 DB11/15, SP11/15 union fitting polypropylene