|
Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5
Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports
|
548.25 |
|
|
Fill-Rite 807CN1 Nickel-Plated 1" Meter
The 807CN1 Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for gasoline, diesel, kerosene, mineral spirits, stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807CN1 is a 3-wheel mechanical meter, nickel coated, designed for transfer pumps with a flow rate of 5 to 20 GPM. this meter has a 1 in. inlet and outlet.
+/- 1% accuracy
UL/cUL, CE listed
5-20 GPM
50 PSI
1 in. inlet, 1 in. outlet
Large easy to read display
NPT threads
Nickel plated to handle non-potable water
Meter Digit Indication: Up to 99.9 Gallons (resettable)
Totalizer Digits Indicating: Up to 99,999.9 Gallons (non-resettable
Description: 3-Digit (Gal)
Flow Rate: 5-20 GPM
Max Pressure: 50 PSI
Inlet/Outlet: 1"
Housing Material: Aluminum
Seals Material: Viton
Internal Material: PPS, stainless
Compatible Fluids: Gasoline, diesel, B20, E15, kerosene, non-potable water
Certification: UL/cUL, CE, ATEX
|
435.37 |
|
|
Fill-Rite 901 Flow Meter 40Gpm 1" Ports
Fill-Rite Flow Meter 6-40GPM 1"FNPT Ports
|
457.47 |
|
|
Fill-Rite 807C Flow Meter 20Gpm 3/4" Ports
The 807C Mechanical flow meter has a large easy to read display, flow ports can be positioned vertically or horizontally, UL/cUL listed, handles fluid of any viscosity, rated for Gasoline, Diesel, Kerosene, mineral spirits, Stoddard solvents and heptane. Fill-Rite meters provide precision and durability in a cost-effective design. The 807C is a 3 wheel mechanical meter designed for transfer pumps with a flow rate of 5 to 20 GPM (gallons per minute). This meter has a 3/4 " inlet and outlet.
Product features
5 to 20 gallons per minute
50 PSI (pounds per square inch)
3/4 inch inlet and outlet
Large easy to read display
NPT threads
|
329.29 |
|
|
Fill-Rite 901-1 1/2 Flow Meter
Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports
|
465.21 |
|
|
Fill-Rite 901-W Flow Meter 40Gpm 1" Ports
|
471.46 |
|
|
8013 Mounting Panel for (1) 2-3/4" Meter
Surface Mounts for Blue Sea Systems 2-3/4" Analog or Digital Meters.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.82 |
|
|
Temperature Sender 250°F/120°C Floating Ground - 1/2-14 NPTF
Features:
Ground - Floating
Connection - .25" Spade
Voltage - 6-24V
Thread - 1/8-27 NPTF
Component Reference No. - 805/1/4
Max. Temperature Scale - 250°F/120°C
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.56 |
|
|
Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug
|
3.65 |
|
|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP
BURKS Model: GNB6-1-1/2-6.25
Burks Frame Mounted End Suction GNB Series Pump
Bronze Fitted, 6.25" Bronze Impeller
2" Suction & 1 1/2" Discharge
Carbon / Ceramic / SS Buna-N Shaft Seal
Maximum Temperature of 225°F (107°C)
Application: Waste Treatment and Plating
Ships Via Truck please us the Contact Us page to get a Freight Quote.
|
3273.19 |
|
|
Snatch Block Acetal Sheave - Single - 12mm(1/2") Max. Rope Diameter
Snatch blocks are a tough and reliable solution for temporary leads and line deflection. Simple and quick to deploy, they can be easily opened when the load is released. The standard snap shackle head allows the block to swivel through 360°. Soft resilient cheeks reduce clatter and protect gelcoat and painted surfaces. Attachment point provided for shock cord hanger.
Features:
Easily operated latch mechanism
Lightweight
Soft resilient cheeks
Applications:
Temporary sheeting point while changing sheets for boats up to 10M (33')
Temporary reefing block for boats up to 10M (33')
Spare or replacement block for general use on larger boats depending on line angle and load
Materials:
U.V. stabilized Acetal sheaves
Grade 316 stainless steel frame and load strap
Soft thermoplastic rubber cheeks
Investment cast Grade 15-5PH stainless steel snap shackle
Specifications:
Sheave Ø: 64mm(2-1/2")
Max. Rope Ø: 12mm(1/2")
M.W.L.: 1,000kg(2,200lbs)
B.L.: 2,000kg(4,410lbs)
Weight: 480g(16.9oz)
|
179.33 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0100
|
224.25 |
|
|
Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-1/2 Part # 0115-0064-0200 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-1/2 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March AC-1A-MD-1/2 is suitable for your application, please contact March Pump.
Unit System 60Hz 50Hz Max Flow
3 GPM
9 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"OD
Outlet
1/2"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0200
|
202.80 |
|