|
Flotec FP0S1300X Tempest™ Water Removal Utility Pump 1/6 HP, 1470 GPH
The Tempest™ is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.
KEY FEATURES
Multipurpose pump for emergency basement and sump draining, emptying ponds, appliances, wash down and roof dewatering
Draws water down to 3/16"
Corrosion-resistant, continuous duty submersible pump
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6
MAXIMUM CAPACITY: 1470 GPH
FLOW at 10' LIFT: 930 GPH
DISCHARGE SIZE: 1" female (includes garden hose adapter)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' long / 18-3 wire / T-handle on pump connector
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
184.08 |
|
|
Flotec FP0S1775A IntelliPump™ Water Removal Utility Pump, Auto On/Off, 1/4 HP, 1790 GPH
The IntelliPump | Just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles.
KEY FEATURES
Innovative electronic controlled pump - Pump starts every 2-1/2 minutes to check for water. Shuts off if water is not detected
Perfect for surfaces that collect water such as basements, rooftops, or any shallow flooded area
Corrosion-resistant engineered resin construction
WARRANTY
2 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1790 GPH
FLOW at 10' LIFT: 1260 GPH
DISCHARGE SIZE: 1" NPT (female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 15' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
328.38 |
|
|
Flotec CYCLONE™ Water Removal Utility Pump
The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.
KEY FEATURES
Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks
Self-priming at 8-10 ft. vertically
Corrosion-resistant, compact and portable
WARRANTY
90-day limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/12
MAXIMUM LIFT: 43'
MAXIMUM CAPACITY: 350 GPH
FLOW at 10' LIFT: 300 GPH
SWITCH TYPE: Manual Operation (No Switch)
SUCTION SIZE: Male Garden Hose
DISCHARGE SIZE: Male Garden Hose
MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only
AMP DRAW (full load):
CORD LENGTH: 6' w/ 3-prong grounded plug
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
207.48 |
|
|
Flotec FPSE2800A Thermoplastic Effluent Pump
The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed.
Automatic submersible effluent/dewatering pump
Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites
Thermoplastic construction
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3600 GPH
FLOW AT 10' LIFT: 2700 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 11-1/2"
SWITCH OFF LEVEL: 4-1/2"
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 1-1/2"
MAXIMUM SOLID HANDLING SIZE: 3/4"
CORD LENGTH: 15'
AMP DRAW: 7 amps
VOLTAGE: 115v, 60 Hz
|
436.80 |
|
|
Flotec FP5172 Thermoplastic Sprinkler Pump 1.5 HP
Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads.
KEY FEATURES
Superior performance at depths to water of 20' or less
Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
Ready-to-install 230 volt motor (dual voltage)
Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1-1/2
MAXIMUM CAPACITY: 67 GPM
FLOW at 10' LIFT and 30 PSI: 45 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 47 psi
SUCTION PIPE SIZE: 1-1/2" NPT
DISCHARGE PIPE SIZE: 1-1/2" NPT
AMP DRAW (full load): 9.6 amps on 230v / 19.2 amps on 115v
VOLTAGE: 230v / 115v , 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 25 amp for 115v
MAXIMUM WATER TEMPERATURE: 140 °F (60 °C)
|
621.00 |
|
|
Flotec FP0S3000X Thermoplastic Waterfall/Utility Pump 4/10 HP
With a quality design providing years of trouble free service our line of Thermoplastic waterfall / Utility pumps can help turn your backyard into a garden oasis.
KEY FEATURES
Oil free and fish safe
Stainless steel or engineered composite construction - superior corrosion resistance
Dual ball bearing design - quiet, long lasting, years of trouble-free service
High performance - ideal for waterfalls and streams
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 4/10
MAXIMUM LIFT: 25'
MAXIMUM CAPACITY: 3000 GPH
FLOW at 10' LIFT: 1900 GPH
SWITCH TYPE: Manual Operation (No Switch)
DISCHARGE PIPE SIZE: 1-1/4" (Ships With Multiple Adapters)
MAXIMUM SOLIDS HANDLING SIZE:
AMP DRAW (full load): 3 Amps
CORD LENGTH: 15' w/ grounded 3-prong plug
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 100°F (38°C)
|
334.62 |
|
|
Flotec FPPM3600D Thermoplastic Pedestal Sump Pump 1/3 HP
The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.
FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting thermoplastic construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3000 GPH
FLOW AT 10' LIFT: 2460 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/4" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amps
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
|
178.62 |
|
|
Flotec FPPSS3000 Cast Iron Pedestal Sump Pump 1/3 HP
The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.
FEATURES
Replaces any existing brand of 1/3 HP pedestal pump
Long lasting cast iron construction
Quick, easy installation
Fits in a 12" diameter basin and offers a 1-1/4" discharge
2 year limited warranty
BODY CONSTRUCTION: Cast Iron Base with Stainless Steel Column
HORSEPOWER: 1/3
MAXIMUM CAPACITY: 3480 GPH
FLOW AT 10' LIFT: 2700 GPH
SWITCH TYPE: Vertical
SWITCH ON LEVEL: 10-1/2"
SWITCH OFF LEVEL: 2-1/2"
MINIMUM SUMP DIAMETER: 12"
MINIMUM SUMP DEPTH: 12"
DISCHARGE PIPE SIZE: 1-1/2" FNPT
MINIMUM PIPE SIZE: 1-1/4"
MAXIMUM SOLID HANDLING SIZE:
CORD LENGTH: 6'
AMP DRAW: 3.5 amps
VOLTAGE: 115V, 60 HZ
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F to 70°F(0°-21°C)
|
319.02 |
|
|
Flotec FPSE3601A Cast Iron Sewage Pump 1/2 HP
Rugged, sewage and effluent pumps are capable of handling solids up to 2". Available in cast iron design for a variety of wastewater applications.
Heavy-duty, rugged cast iron automatic submersible sewage pump
Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites
Includes by-pass float switch for automatic or manual operation
BODY CONSTRUCTION: CAST IRON
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 9000 GPH
FLOW AT 10' LIFT: 5400 GPH
SWITCH TYPE: Tethered
DISCHARGE PIPE SIZE: 2" NPT
MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications
MAXIMUM SOLID HANDLING SIZE: 2"
CORD LENGTH: 10'
AMP DRAW: 13 amps
VOLTAGE: 115v. 60 Hz
RECOMMENDED BREAKER: 20 amp
|
699.00 |
|
|
Flotec FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP
Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less.
KEY FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Ready-to-install dual voltage (115v/230v) motor
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 8.8 GPM
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM
MAX PSI: 56 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
MINIMUM SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.4 amps
VOLTAGE: 115v/230v (preset to 115v), 60 Hz
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
JET KIT: included
|
433.55 |
|
|
Flotec FPSE3200A Thermoplastic Sewage Pump
Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.
Automatic submersible sewage pump
Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites
Durable, corrosion-resistant thermoplastic construction
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 4/10
MAXIMUM CAPACITY: 5250 GPH
FLOW AT 10' LIFT: 2550 GPH
SWITCH TYPE: Tethered
SWITCH ON LEVEL: 12-1/2"
SWITCH OFF LEVEL: 5-1/2"
DISCHARGE PIPE SIZE: 2"
MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications
MAXIMUM SOLID HANDLING SIZE: 2"
CORD LENGTH: 8'
AMP DRAW: 8.5 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amps
|
456.00 |
|
|
Flotec FP4105 Cast Iron Jet Pump 1/2 HP
New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water.
KEY FEATURES
Reliable performance at 25' depth to water or less
Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM
Pump housing is constructed of heavy-duty cast iron and is ready to install
115 volt 1/2 HP
Fan cooled, completely enclosed motor
1" Suction Port and 1" Discharge Port
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 5.6 GPM
FLOW at 10' LIFT and 40 PSI: 4.5 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 63 PSI
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 7.2 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
381.42 |
|
|
Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP
Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
Switch Type: Tethered - Operates in 14" basins or larger
Horse Power: 1/4 HP
GPH: 3,200
Max Lift: 20'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
219.96 |
|
|
Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP
Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
1 Year Limited Warranty
Switch Type: Tethered - Operates in 14" basins or larger
Horse Power: 1/3 HP
GPH: 3,600
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
255.84 |
|
|
Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP
Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins.
Thermoplastic construction - resists corrosion
Zinc motor housing - dissipates heat quickly and extends motor life
Stainless steel fasteners and hardware - for long life
Smooth Flow Hydraulics - delivers high performance for demanding applications
Switch Type: Vertical - Operates in 10" basins or larger
Horse Power: 1/3 HP
GPH: 3,600
Max Lift: 22'
Solids Handling: 3/16"
Discharge: 1.5" NPT
Power Cord: 8', Grounded
|
262.86 |
|