|
Flotec FP003414S Service Kit For F360AC
Service Kit for Flotec FP0F360AC Cyclone Pump and Simer M-40, M40 Pumps with Oval Shaped Front Covers. Also Fits Older Pumps with Square Front Covers.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
25.52 |
|
|
Bosworth 400H-Viton Kit
Bosworth Service Kit for 400 Series with Viton Diaphragm and Viton Flapper Valves
|
63.62 |
|
|
Detroit Diesel 671TI-871-1271SS KIT Service Kit
Detroit Diesel- Service Kit with Wearplate, Cover Gasket, Endcover, Slinger, Impeller, 5 Cover Screws, Retaining Ring, Cam, Cam Screw, Bearing Seal, Main Seal, Shaft, Ball Bearing, 2 Round Port Gaskets
|
1012.70 |
|
|
Flotec FP4112 Cast Iron Shallow Well Jet Pump 1/2 HP
Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less.
KEY FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Ready-to-install dual voltage (115v/230v) motor
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 8.8 GPM
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM
MAX PSI: 56 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
MINIMUM SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.4 amps
VOLTAGE: 115v/230v (preset to 115v), 60 Hz
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
JET KIT: included
|
433.55 |
|
|
Flotec FP003415S Brush Kit For F360AC
Flotec Brush Kit for Flotec FP0F360AC Cyclone Pump and Simer M-40, M40 Pump. Fits Pumps with Square Front Covers Only.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
52.92 |
|
|
Flotec FP4012-10MK Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4012-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring.
This Kit Does Not Fit The FP4012-08 Pump. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
196.09 |
|
|
Flotec FP401215H-10MK Overhaul Kit
Flotec- Overhaul Kit for Flotec FP401215H-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring.
This Kit Does Not Fit The FP401215H-08 Pump. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
196.09 |
|
|
Flotec FP4032-10MK Overhaul Kit
Flotec Overhaul Kit for Flotec FP4032-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring
This Kit Does Not Fit The FP4032-08 Pump.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
216.23 |
|
|
FPP1520 Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4012-08 Only.
Includes Seal and Gasket Kit, Impeller, Seal Plate Insert, and Diffuser
This Kit Does Not Fit The FP4012-10 Pump.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
69.16 |
|
|
FP4022 Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4022-08 Only.
Includes Seal and Gasket Kit, Impeller, Seal Plate Insert, and Diffuser.
This Kit Does Not Fit The FP4022-10 Pump.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
69.16 |
|
|
Flotec FPP1870 Overhaul Kit
Flotec Parts Kit (Impellers) for Flotec FP4815
|
187.46 |
|
|
Flotec FP4112-08 Cast Iron Shallow Well Jet Pump 1/2 HP
Cast iron shallow well jet pumps provide superior performance and high capacities with more pressure for shallow wells 25' or less.
KEY FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Ready-to-install dual voltage (115v/230v) motor
1-1/4" NPT suction and 1" NPT discharge pipe sizes
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 8.8 GPM
FLOW AT 10' LIFT and 40 PSI: 7.8 GPM
MAX PSI: 56 psi
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1-1/4" NPT
MINIMUM SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1"
MINIMUM DISCHARGE PIPE SIZE: 3/4"
AMP DRAW: 9.4 amps
VOLTAGE: 115v/230v (preset to 115v), 60 Hz
RECOMMENDED BREAKER: 15 amp
LIQUID TEMP RANGE: 32°F-140 °F (0°C-60 °C)
JET KIT: included
ACCESSORIES INCLUDED: none
|
465.00 |
|
|
JMP Marine JSK0080 Cummins Engine Cooling Seawater Pump Major Service Kit
Replaces Cummins 4930629, John Deere DZ108626, Sherwood 25045.
Services Pumps: JPR-C1100, Cummins 3349392, 4929178, 5260393, JPR-JD60IF2, John Deere DZ108620, Sherwood G2910X
JSK0080 JMP Marine Cummins Engine Cooling Raw Water / Seawater Pump Major Service Kit
Replacement and Equivalent to:
Cummins Kit 4930629
John Deere Kit DZ108626
Sherwood Kit 25045
Please Note:
JSK0080 includes all internal parts for full entire rebuild of pump vs Cummins kit 5260396 which has less parts. You get ALL PARTS with JMP Marine kits! Parts are fully compatible to genuine and can be used to service both JMP Marine pumps JPR-C1100, JPR-JD60IF2 along with Genuine OEM pumps!
Kit Includes All Internal Parts for full rebuild:
8359-01 (FLEXIBLE IMPELLER) - QTY:1
CAMSET0032 (CAM SET) - QTY:1
MCSSET0019 (MECHANICAL SEAL SET) - QTY:1
SHA0093 (SHAFT) - QTY:1
ORG0055 (O-RING) - QTY:1
ORG0054 (O-RING) - QTY:1
RET0042 (OIL SEAL) - QTY:1
COV0041 (BEARING COVER) - QTY:1
BER0052 (BEARING) - QTY:2
WER0020 (WEAR PLATE) - QTY:1
COV0038 (END COVER) - QTY:1
SNP0013 (SNAP RING) - QTY:1
BOL0036 (SPRING WASHER) - QTY:5
BOL0007 (END COVER BOLT) - QTY:5
Services JMP Marine & OEM Genuine Engine Cooling Raw Water / Seawater Pumps:
JPR-C1100 Cummins Replacement Pump
JPR-JD60IF2 John Deere Replacement Pump
|
961.73 |
|
|
Oberdorfer N202M-17 Minor Service Kit
This kit contains the following items
OB 32592
1
SEAL
OB 6593
1
IMPELLER
OB 6599
1
GASKET
OB 9797-034B
1
O'RING BUNA
All kits are put together at time of order
|
151.58 |
|
|
Service Kit f/18590 Macerator Pumps
For older pumps with brass studs, washers and acorn nuts
**Stainless Steel Bolt Kit - (17288-1000) sku-56848 - must be purchased**
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
67.32 |
|