Flotec FP0026-10 Check Valve KEY FEATURES   Fits 1-1/4" or 1-1/2" discharge pipes Designed To Allow Connection To Pipes on Both Ends (Inline Installation) Simple Hose Clamp Connection   Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same

Flotec PW73-63 Check Valve 1"Mnpt X 1"Fnpt  

SHURflo 94-374-10, Check Valve SHURflo Check Valve Viton, 2 Way for Backflow Prevention

Flotec FP5162 Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. KEY FEATURES Superior performance at depths to water of 20' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install 230 volt motor (dual voltage) Self-priming after pump housing is initially filled (Check Valve or Foot Valve required) WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1 MAXIMUM CAPACITY:  55 GPM FLOW at 10' LIFT and 30 PSI:  28 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  42 psi SUCTION PIPE SIZE:  1-1/2" NPT DISCHARGE PIPE SIZE:  1-1/2" NPT AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

Flotec FP5172 Thermoplastic Sprinkler Pump 1.5 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. KEY FEATURES Superior performance at depths to water of 20' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install 230 volt motor (dual voltage) Self-priming after pump housing is initially filled (Check Valve or Foot Valve required) 1 year limited warranty   BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1-1/2 MAXIMUM CAPACITY:  67 GPM FLOW at 10' LIFT and 30 PSI:  45 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  47 psi SUCTION PIPE SIZE:  1-1/2" NPT DISCHARGE PIPE SIZE:  1-1/2" NPT AMP DRAW (full load):  9.6 amps on 230v / 19.2 amps on 115v VOLTAGE:  230v / 115v , 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 25 amp for 115v MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)    

Flotec FP5182 Thermoplastic Sprinkler Pump 2 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. KEY FEATURES Superior performance at depths to water of 20' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install 230 volt motor (dual voltage) Self-priming after pump housing is initially filled (Check Valve or Foot Valve required) 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  2 MAXIMUM CAPACITY:  69 GPM FLOW AT 10' LIFT and 30 PSI:  45 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  50 psi SUCTION PIPE SIZE:  2" NPT DISCHARGE PIPE SIZE:  2" NPT AMP DRAW:  12 amps on 230v / 24 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 30 amp for 115v MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

Double Barb Inline Scupper Check Valve - 1-1/8" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

Double Barb Inline Scupper Check Valve - 1-1/2" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

Flotec FP2112 Submersible Well Pump 4" Flotec  Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 2 Wire, 1/2HP 230V, 1-1/4”NPT Port, Water Filled Submersible Motor, Built-in Check Valve, No Control Box Required

Flotec FP2122 Submersible Well Pump 4" Flotec Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 2 Wire, 3/4HP 230V, 1-1/4”NPT Port, Water Filled Submersible Motor, Built-in Check Valve, No Control Box Required

Double Barb Inline Scupper Check Valve - 3/4" - Black A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior.  Features: Prevents Backwash Chemical Resistant Materials Thermo-Plastic Flapper

In-Line Check Valve 1"-1 1/2" Stepped Connection All Whale bilge switches, non-return valves, strainers and pipework fittings are designed and manufacturers with highest quality at heart. Combine these accessories with your whale bilge pump for a robust bilge system tailored to your vessel. LV1215 In-line Check Valve 25mm / 38mm (1"/ 1 1/2") Stepped Connection WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProPress 1/2" Zero Lead Check Valve - Double Press Connection - Smart Connect Technology Features: For potable water applications Bronze Press connection Inline Components: EPDM sealing elements 

ProPress 3/4" Zero Lead Check Valve - Double Press Connection - Smart Connect Technology Features: For potable water applications Bronze Press connection Inline Components: EPDM sealing elements 

ProPress 1" Zero Lead Check Valve - Double Press Connection - Smart Connect Technology Features: For potable water applications Bronze Press connection Inline Components: EPDM sealing elements