Flojet 01740-012 Strainer 1/2" Barb X Quad These Flojet strainers are compatible with fresh or salt water and meet FDA standards for portable water. They will handle up to 7 gpm, have twist off clear bowls, and 40 mesh stainless steel screens.

Flojet 01740-010 Strainer 3/4 Barb X Quad 90D Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM) Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)

Flojet 01821002C 1/2 Pex X 1/2"-14(F)Elbow Flojet 1/2" PEX ID x Pump Plug-In Port White Plastic for Fresh Water  90 Deg Elbow 1821001C 10-8227

Flojet 01820003C 1/2 Id X 1/2 M Npt  

Flojet 01821000C 1/2 Id X 1/2 Id Elbow  

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet 01740-002 Strainer 1/2Brb X 1/2Brb  Flojet- Strainer 1/2” Hose Barb Inlet x 1/2” Hose Barb, 40 SS Mesh Screen

Twist-On Water Strainer - 1/2" Barb Inlet - Clear Bowl Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Swivel Nut Strainer - 1/2" Barb Inlet - Clear Bowl Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pumphead. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly. Features: 50-Mesh SS Screen Easy to Install to Pump Head Clear, Clean Plastic Construction Makes it Easy to See When Cleaning is Needed Keeps Debris out of the Pump Easy Disassembly for Cleaning

1/2" Barb x 1/2" NPT-F Hex/Wingnut Straight Fittings Fittings accommodate all SHURFLO® pumps with 1/2"-14 threads.

Flojet 01740-004 Strainer Quest X Quest  Flojet- Strainer 1/2” Quest Thread Inlet x 1/2” Quest Thread, 40 SS Mesh Screen

Flojet 01825001C 1/2 Slip Stem X 3/4 Hs Barb  

Flojet 01825000C 1/2 Slip Stem X 1/2 Barb  

Flojet 01822000C 1/2 Id Equal Tee  

Flojet 01825005C 1/2 Slip Stem X 3/4 M Npt