Flojet 01740-004 Strainer Quest X Quest  Flojet- Strainer 1/2” Quest Thread Inlet x 1/2” Quest Thread, 40 SS Mesh Screen

Flojet 01740-014 Strainer .5Quest X Quad  Flojet- Strainer Direct Plug-In Quad Port x 90 Degree 1/2” MPT Inlet, 40 SS Mesh Screen

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet 01740-010 Strainer 3/4 Barb X Quad 90D Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM) Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)

Flojet 01740-000S Strainer 3/4Brb X 3/4 Brb  Flojet- Strainer 3/4” Hose Barb Inlet x 3/4” Hose Barb, 40 SS Mesh Screen

Flojet 01740-002 Strainer 1/2Brb X 1/2Brb  Flojet- Strainer 1/2” Hose Barb Inlet x 1/2” Hose Barb, 40 SS Mesh Screen

Flojet 01740-012 Strainer 1/2" Barb X Quad These Flojet strainers are compatible with fresh or salt water and meet FDA standards for portable water. They will handle up to 7 gpm, have twist off clear bowls, and 40 mesh stainless steel screens.

Flojet 01740-950S Strainer 90' Quad X Quad This Flojet 01740-950S strainer keeps debris out of your pump. Its 40 mesh screen is typically used for potable / drinking water applications. The strainer body is made of polypropylene with a clear cap and Buna-N o-rings. It has a 90 degree elbow design.   The strainer has a direct plug-in quad port outlet and female quad port inlet. You can use any standard snap-in quad port fitting for the inlet side. It will fit into the snap-in quad ports on Flojet diaphragm pumps under 6 GPM.   Materials are FDA approved Easy-to-clean plastic bowl Fine 40 mesh stainless steel screen Ports: Quad Female to Quad Male Set at 90 degrees from inlet to outlet  

Flojet 01740-711A Strainer for Jabsco 52700 This fits Flojet and Jabsco 5700 Diaphragm pumps. Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 02009-004 Motor 12V TENV Standard Shaft Sleeve Bearings 3250RPM

Flojet 20404-004 Upper Housing For 4105  

Flojet 20406-004 P/H Assy For 4105-143 &Amp;  

Flojet 20467-004 Kit Check Valve Geolast  

Flojet 20468-004 Kit End Cover Geolast  

Flojet 21010-004 Diaphragm Kit Sant/Poly New