Flojet 01720-375B Strainer 3/8 Brb 20 Mesh Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

FloJet 01720-123S Strainer 3/8 Brb x 3/8 Npt PP This is the replacement part for FloJet 01720-123 Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet 01810003C 3/8 Id Pex X 1/2 Npt  

Flojet 01812000C 3/8 Id Equal Pex Tee  

Flojet 01815000C 3/8 Slip Stem 1/2 Hose Barb  

Flojet 01815004C 3/8 Slip Stem X 1/2 Npt M  

Flojet 01870001C 3/8 Id Ftg Lock Clips 6 Ea  

Flojet 01890000C 3/8-1/2 Tube Cutter  

Flojet 01740-000S Strainer 3/4Brb X 3/4 Brb  Flojet- Strainer 3/4” Hose Barb Inlet x 3/4” Hose Barb, 40 SS Mesh Screen

Flojet 01740-010 Strainer 3/4 Barb X Quad 90D Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM) Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)

Jabsco 18753-0020 Replacement SS Strainer Screen Service Kit 20 Mesh

Pumpgard In-Line Strainer 3/4 Hose - 40 Mesh Inlet strainer protects all-electric diaphragm pumps. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Quick, in-place cleaning of the 40 mesh stainless steel screen.

3/8 ID PEX X 1/2 14 F

Hypro 3800-0026 1/2"-3/4" 80/20 Mesh Screen