|
Flojet 01720-023S Strainer Inlet 3/8Hb
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
|
28.55 |
|
|
Flojet 01720-010S Strainer Inlet 3/4Hb X Q
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
|
27.66 |
|
|
FloJet 01720-123S Strainer 3/8 Brb x 3/8 Npt PP
This is the replacement part for FloJet 01720-123
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
|
19.80 |
|
|
Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb
Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.
|
28.55 |
|
|
Flojet G575235 Air Pump Sp1 3/8Hbe 3/8Hbe
The Flojet G575235 is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Santoprene Diaphragm, Santoprene Check Valve, EPDM O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.
This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling.
The Flojet G575235 Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply.
|
208.79 |
|
|
Flojet G57-5235A Apu Sp1 3/8Hbe 1/4Bs Pp
The Flojet G575235A is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Santoprene Diaphragm, Santoprene Check Valve, EPDM O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.
This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling.
The Flojet G575235A Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply.
|
213.19 |
|
|
Flojet 01720-002S Strainer Inline 1/2Hb SS
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
|
28.55 |
|
|
Flojet 01720-375B Strainer 3/8 Brb 20 Mesh
Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
|
28.55 |
|
|
Flojet 01740-002 Strainer 1/2Brb X 1/2Brb
Flojet- Strainer 1/2” Hose Barb Inlet x 1/2” Hose Barb, 40 SS Mesh Screen
|
28.55 |
|
|
Flojet 01740-004 Strainer Quest X Quest
Flojet- Strainer 1/2” Quest Thread Inlet x 1/2” Quest Thread, 40 SS Mesh Screen
|
27.97 |
|
|
Flojet 01740-014 Strainer .5Quest X Quad
Flojet- Strainer Direct Plug-In Quad Port x 90 Degree 1/2” MPT Inlet, 40 SS Mesh Screen
|
28.55 |
|
|
Flojet 01740-010 Strainer 3/4 Barb X Quad 90D
Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen
Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.
Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.
Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.
Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)
Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)
|
28.55 |
|
|
Flojet 01740-012 Strainer 1/2" Barb X Quad
These Flojet strainers are compatible with fresh or salt water and meet FDA standards for portable water. They will handle up to 7 gpm, have twist off clear bowls, and 40 mesh stainless steel screens.
|
27.97 |
|
|
Flojet 01740-000S Strainer 3/4Brb X 3/4 Brb
Flojet- Strainer 3/4” Hose Barb Inlet x 3/4” Hose Barb, 40 SS Mesh Screen
|
28.55 |
|
|
Flojet 04300-525A 115V 3.3Gpm S/V Sw45
Flojet 04300525A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 5 GPM, 35 PSI, 115VAC
Polypropylene Pump & Motor Assembly
The Flojet 04300525A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm.
The Flojet 04300525A pump includes 3/4" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 5 GPM. Quiet, smooth, and safe operation!
Specifications and Benefits:
5 GPM
35 PSI
115 volt AC
3/4" hose barb inlet
3/4" hose barb outlet
Polypropylene housing
Viton check valve
Santoprene diaphragm
6' power cord
Snap-in ports for easy installation
130° Fahrenheit maximum fluid temperature
Built-in pressure switch automatically starts and stops
Can run dry without damage
Excellent self-priming capability (up to 8 feet vertical)
Powerful magnet motor with low current draw
4 piston design delivers high flow rates
Handles water-like and viscous liquids up to 250 cP
CE Certified
|
327.51 |
|