Strainer Cover Replacement for 1720, 1740, 46200 & 46400 Features: Replacement strainer cover for pump inlet strainers For models 1720, 1740, 46200, and 46400

JABSCO 46400-0711 PUMP GUARD STRAINER Jabsco Pump Guard Strainer, with Large Format Direct Plug-In Quad Port Outlet and Large Format Snap-In Port Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen. The Snap-In Parts of this Strainer Measures 1" Diameter. For 6 GPM or larger pumps only.   This replaces the following Flojet Strainers 01740-711A, 01740-711S, 01740711A, 01740711S

Hypro 1720-0136, O'Ring-Bottom Cover Replacement for: 2220B-P, 2221B-P, 2230B-P, 2231B-P

Fresh Water Filter Strainer Cover with O-Ring Assembly Features: Strainer Cover For filters used with freshwater pumps

Replacement Kit Replacement Screen Kit - 20 Mesh f/1-1/4" Strainers

Flojet 01890001C Cutter Replacement Bld 6-Pk  

Jabsco 46200-0000 Pumpgard Strainer Inline

Jabsco 46400-0010 Pumpgard Strainer  

Jabsco 46400-9500 Pumpgard Strainer  

Jabsco 46400-0003 Pumpgard Strainer Inline

Jabsco 46400-0030 Snap Fit Strainer

Jabsco 46400-0375 Pumpgard Strainer Inline

Jabsco 46400-0012 Pumpguard 90Deg 1/2Hb Fresh Water Pump Inlet Strainer - Hose, for Par-Max pumps   Connections: 13mm (1/2") ID hose 90º inlet and direct plug into Par-Max inlet port Dimensions: 120mm long, 70mm wide, 60mm high Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Screw off top allows quick in-place cleaning and removal of debris. 40 mesh stainless steel filter screen Packaged Dimensions: L:24.00 x H:16.00 x W:17.00cm  

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet 01740-010 Strainer 3/4 Barb X Quad 90D Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM) Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)