|
RV Water Pump - 12V - 1GPM - 35PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC
1 GPM (3.8 LPM)
35 PSI (2.4 BAR)
Port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
84.46 |
|
|
RV Water Pump with Strainer - 12V - 3GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
3 GPM (11 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
91.78 |
|
|
RV Water Pump with Strainer - 24V - 3GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
3 GPM (11 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
119.74 |
|
|
Flojet Lf112-201 Pump 12V 1.1/35 Psv Sw
Flojet- Diaphragm Pump Duplex Miniature 12V, 3/8” Hose Barb Ports, 1.0GPM Max, 35psi Switch, Polypropylene, Viton Valves, Santoprene Diaphragm, Metal Finned Motor Housing with On-Off Switch
|
137.45 |
|
|
Flojet 02100-840 Pump 12V
Flojet- Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 2.1GPM, Polypropylene, Buna Valves and Diaphragm, Double Bypass 50psi, Discharge Left
|
226.90 |
|
|
Flojet 02100-122 Pump 12V 2.1/60 Pvv Sw
Flojet- Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 2.1GPM, 60psi Switch, Polypropylene, Viton Valves and Diaphragm
|
282.80 |
|
|
Flojet 02100-732 Pump 12V 2.1/50 Pss Sw
Flojet- Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 2.1GPM, 60psi Switch, Polypropylene, EPDM Valves, Santoprene Diaphragm
|
268.32 |
|
|
Flojet 02100-735 Pump 12V 2.1/50 Pbb D/Lf
Flojet- Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 2.1GPM, 50psi Max, Polypropylene, Buna Valves and Diaphragm, no Switch, no Bypass, Discharge on Left
|
255.97 |
|
|
Heavy Duty RV Water Pump with Strainer - 12V - 3GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC
3 GPM (11 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
131.10 |
|
|
Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
170.42 |
|
|
RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon.
The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience!
Features:
A neat and clean way to quickly evacuate waste tanks
Empty black-water and greywater Holding Tanks at home
Grinds waste as it pumps
Built-in Impeller Protection Device...longer life!
The flow of up to 13 GPM for fast, clean Holding Tank evacuation
Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.
Applications
Empty holding tanks and avoid dump stations
Transfer waste from recirculating toilets to main holding tank
Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.
Specifications:
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition Protection
Weight: 3.5lb (1.6 kg) Approx.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
235.19 |
|
|
Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
196.66 |
|
|
Flojet D2131I5011A Diaphragm Pump 12V 1.6Gpm
Replacement For : Flojet 02135-561
The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications.
Features :
Self priming up to 8 feet (2.4 m).
Can run dry without damage.
Chemical resistant material.
Internal bypass standard.
Built-in back flow preventer.
Heavy duty ball bearing drive system.
UL, CSA and CE models available.
Specifications:
Diaphragm Pump Duplex II 12V
3/8" FNPT Ports
1.6GPM
60PSI Switch
Polypropylene
EPDM Valves
Santoprene Diaphragm
|
207.90 |
|
|
Flojet 04305-500 Pump 12V 3.3/35 Pse Sw
Flojet 04305500A Quad Diaphragm Pump - 35 PSI, 3.3 GPM, 12 VDC, 1/2 Inch Quick Connect Plugin Ports
Electric Pump
This Flojet 04305500A is self-priming quadruple diaphragm pump delivers 3.3 GPM flow rate. Self-primes at 2.4 m of vertical lift. Incorporates 1/2-inch quick connect plugin ports. Reaches a maximum pressure of 35 PSI and compatible with 12 VDC power.
Specifications:
Voltage: 12 VDC
Flow Rate: 3.3 GPM
Max PSI: 35
Ports: 1/2" Quick Connect Plugin Ports
|
206.84 |
|
|
Flojet 02100-714 Pump 12V 1.7/80 Pbb 1Bp
Flojet- Diaphragm Pump Duplex 12V, 3/8"FNPT Ports, 1.7GPM, Polypropylene, Buna Valves and Diaphragm, Double Bypass 55psi with 1/4” Hole
|
240.33 |
|