Bait Box with Aerator - 8 Quart Specifically designed and tested to keep saltwater baitfish healthy and active, these pumps can convert any size cooler or livewell into an oxygen-rich aquarium. Features: Aerated live bait cooler Durable insulation Keeps bait cool and aerated Lift-out net liner Lid latch prevents spilling of water/bait during travel Includes a 14331 aerator 8 quart capacity 15" x 8.5" x 8.5"

Dual Fish Bait Bucket with Aerator Built-In Features more durable construction and adds a series of innovative lid designs to help you maintain the health of your bait. The Dual Bait Bucket includes a clip-on aerator (#14331) and a storage compartment built-in to the lid for worms or other bait separate from minnows. Features: 1.3 Gallon Capacity Insulated Liner Built-in Compartment Lid Aerator Clip-on Bracket Hose Hole in Lid Lid Housed Aerator

Magnum Bait Station® Replacement Aerator This replacement aerator connects to the lid of any Frabill Magnum Bait Station model. The secret of these bait coolers is that the installation port for the aerator is integrated directly into the lid. Keep bait lively and fresh with one complete system that's easy to use and easy to open. This replacement aerator installs in just seconds to begin pumping in oxygen, instantaneously turning your cooler into a live well.  Features: Fits any size Magnum Bait Station cooler Runs on a 12V adapter (included) or two D batteries (not included) Easy to install

Bait Bucket The live bait storage container serious anglers depend on is more durable than ever. Each Frabill Bait Bucket is engineered to help keep your minnows healthy and frisky, and its advanced lid design provides both security and easy access. A built-in clip-on bracket allows you to easily attach a battery-powered aerator; the lid features a hose hole to accommodate the aerator tubing. Sturdy carry handle for easy transport. Features: 2.2 Gallon Capacity Hose hole in lid for aeration Advanced lid design for easy access Sturdy handle for carrying Capacity for clip on aerator

Galvanized 2-Piece Wade Floating Bucket - 8 Quart The Frabill pail that started it all still a fishing favorite. Removable inner bucket attaches to dock for continuous aeration. Features: Super tough galvanized steel Always floats door up, thanks to interior buoyancy collar Large easy to open access lid Multiple aeration holes for better circulation

EDGE 3700 Swimbait Box Built specifically for hard and soft swimbaits, the Plano EDGE 3700 Swimbait Box stores and protects up to 24 individual rigged swimbaits. Designed to keep baits separated and protected, the Plano EDGE Swimbait Box uses gravity to suspend swimbaits and glide baits, elevating them inside the box to prevent tail deformation and preserve bait action. Protective features include Rustrictor corrosion and rust-preventive technology, plus a Dri-Loc O-Ring watertight seal to keep out moisture. WaterWick dividers with moisture-wicking packets protect against rust and corrosion as well. Finished with an EZ label system that allows anglers to quickly identify what’s inside, the Plano EDGE 3700 Swimbait Box is a no-brainer for anglers looking to protect their high-end swimbaits. Features: Protects and stores up to 24 swimbaits Dri-Loc O-ring watertight seal WaterWick Dividers EZ label system Steel pin hinges One hand latch Specifications: Dimensions: 14"L x 9"W x 2.63"H

RAM STACK-N-STOW Bait Board w/18" Pipe, Post & Spline The RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With spline post, located on the bottom of the 18" long pipe, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. With the 18" long pipe, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board. Features: Magnetic surface for tools Customized mounting options Accessorize with phone, camera, drink cup mounts Mounting options for boat and kayak High strength materials ensure product longevity Integrated features for hanging tools Easy removal and stowage Made in U.S.A. Lifetime warranty Bait Board Dimensions: Length: 10" Width: 13" Depth: 1.625" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM STACK-N-STOW Bait Board w/Combination Bulkhead Rail Adapter Kit The RAP-395-RMU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and bulkhead rail adapter kit. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. This mount joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1". Features: Magnetic surface for tools Customized mounting options Accessorize with phone, camera, drink cup mounts Mounting options for boat and kayak High strength materials ensure product longevity Integrated features for hanging tools Easy removal and stowage Made in U.S.A. Lifetime warranty Bait Board Dimensions: Length: 10" Width: 13" Depth: 1.625" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM STACK-N-STOW Bait Board w/Combination Bulkhead/Flat Surface Base & Plunger The RAP-395-BMPU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and combination bulkhead/flat surface mounting base. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. The mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. The bait board will also accomodate pipes and extension poles with a diameter of 1". Features: Magnetic surface for tools Customized mounting options Accessorize with phone, camera, drink cup mounts Mounting options for boat and kayak High strength materials ensure product longevity Integrated features for hanging tools Easy removal and stowage Made in U.S.A. Lifetime warranty Bait Board Dimensions: Length: 10" Width: 13" Depth: 1.625" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

EDGE™ Vertical Jig & Spybait Box Every feature on Plano’s EDGE™ series is part of a well-thought-out system to help you be a better angler. With a family of 18 boxes offering both general purpose and specialized storage that fits into the current Plano sizing system, they will prolong the life of your tackle and give you an edge on the water. One quick glance shows these tackle boxes are different. Look closer and you’ll find they’re not only different – they’re better in every way possible.  Make it your own. The EDGE Flex Series adds ultimate versatility to Plano’s popular EDGE boxes. Every EDGE Flex tackle box includes a fully customizable internal r system plus all the bells and whistles from the standard EDGE line. Features: Holds up to 52 baits WaterWick™ divider with reusable moisture-wicking packet Dri-Loc® O-ring seal maintains waterproofing when closed Rustrictor™ technology delivers 360 degrees of rust preventative protection EZ Label™ system for quick identification of contents Dimensions: 14"L x 9"W x 1.88"H

EDGE 3700 Spinner Bait Box Features: Innovative Spinnerbait retainers hold up to (36) baits in a traditional StowAway Dri-Loc® O-ring seal Rustrictor™ technology delivers 360 degrees of rust-preventative protection EZ Label™ system for quick identification of contents DuraView™ crystal-clear polycarbonate lid

EDGE 3700 Jerkbait Box Built to store and protect up to 20 individual jerkbaits, the Plano EDGE 3700 Jerkbait Box works to keep your baits separated, safe, and in one place. Loaded with protective features, the Plano EDGE 3700 Jerkbait Box includes Rustrictor corrosion and rust prevention technology to keep your high-dollar ripbaits in tip-top shape. To further combat unwanted moisture intrusion, the Plano EDGE 3700 Jerkbait Box features a Dri-Loc O-ring watertight seal that shields your jerkbaits from boat spray and precipitation. As rugged as it is smartly designed, the Plano EDGE 3700 Jerkbait Box features a DuraView crystal-clear polycarbonate lip and steel pin hinges that provide long-lasting dependable functionality. Complete with an EZ label system for quick identification, the Plano EDGE 3700 Jerklbait Box provides a purpose-built, application-specific design that will keep your jerkbaits organized and safe. Features: Dimensions: 14”L x 9”W x 1.88”H Store and protect up to 20 individual jerkbaits Dri-Loc O-ring watertight seal Waterwick divider EZ Label system DuraView crystal-clear polycarbonate lid Rustrictor rust prevention technology Steel pin hinges One-hand latch

EDGE™ FLEX™ Crankbait Box Every feature on Plano’s EDGE™ series is part of a well-thought-out system to help you be a better angler. With a family of 18 boxes offering both general purpose and specialized storage that fits into the current Plano sizing system, they will prolong the life of your tackle and give you an edge on the water. One quick glance shows these tackle boxes are different. Look closer and you’ll find they’re not only different – they’re better in every way possible.  Make it your own. The EDGE Flex Series adds ultimate versatility to Plano’s popular EDGE boxes. Every EDGE Flex tackle box includes a fully customizable internal r system plus all the bells and whistles from the standard EDGE line. Features: FLEX™ System includes 28 interchangeable Crankbait Catcher pods WaterWick™ divider with reusable moisture-wicking packet Dri-Loc® O-ring seal maintains waterproofing when closed Rustrictor™ technology delivers 360 degrees of rust-preventative protection EZ Label™ system for quick identification of contents DuraView™ crystal-clear polycarbonate lid Dimensions: 14"L x 9"W x 2.63"H

PP4800 PowerPod Uncut (Usable Face = 11.125"W x 8"H) (28.3cm W x 20.3cm H) - Carbon Black PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.  Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

PP4900 PowerPod Uncut (Usable Face = 12.5"W x 8"H) (31.75cm W x 19.8cm H) - Carbon Black PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.  Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.