|
MF 765/8 Cleat (834030)
Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry.
The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Marelon will also prevent our cleats from softening on hot days or freezing in winter.
|
11.35 |
|
|
8" Cleat - Teak
Use these stylish cleats in your home, boat, RV, garage, or shed. Makes a perfect hook or drawer pull. Can be easily painted or stained.
|
13.91 |
|
|
Temperature Sender 250°F/120°C Floating Ground - 3/8-18 NPTF
Features:
Ground - Floating
Connection - .25" Spade
Voltage - 6-24V
Thread - 3/8-18 NPTF
Component Reference No. - 805/1/5
Max. Temperature Scale - 250°F/120°C
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.92 |
|
|
MF764/6.5 Cleat (834020)
Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry.
The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Marelon will also prevent our cleats from softening on hot days or freezing in winter.
|
7.69 |
|
|
MF 750 Transom Step/Handle
Features:
1/4" Mounting Holes
Black
Step/Handle
6-5/8" Long x 2-9/16" Deep
Transom
Marelon
|
13.42 |
|
|
MF 673 1" Mounting Clip
Features:
Tiller extension retaining clip
Fits 1" tubing
|
5.65 |
|
|
MF 840 Vented Loop - 1-1/2"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/2" (38.1mm)
Height: 5-1/4" (133.35mm)
Width: 7-3/4" (196.85mm)
|
25.96 |
|
|
MF 842 Vented Loop - 3/4"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 3/4" (19.05mm)
Height: 4-1/2" (114.3mm)
Width: 3-3/4"" (95.25mm)
|
23.22 |
|
|
MF 843 Vented Loop - 5/8"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 5/8" (15.87mm)
Height: 4-1/2" (114.3mm)
Width: 4" (101.6mm)
|
29.46 |
|
|
MF 844 Vented Loop - 1"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1" (25.4mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
33.49 |
|
|
MF 845 Vented Loop - 1/2"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1/2" (12.7mm)
Height: 5-1/4" (133.35mm)
Width: 4-1/4" (107.95mm)
|
28.69 |
|
|
MF 839 Vented Loop - 1-1/4"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/4" (28.57mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
33.49 |
|
|
MF 847 Vented Loop - 1-1/8"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/8" (28.57mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
38.27 |
|
|
MF 841 Vent Cap Assembly
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
|
9.56 |
|
|
Aluminum-S-Cleats
These Aluminum-S-Cleat come in sizes to fit all boats.
Pick from 10", 12", 15", or 18" S cleats
Made from 356 Corrosion-Resistant cast Aluminum these S Cleats are built to withstand the harshest marine environments. No matter the conditions you can trust these cleats. There is also a 10 year warranty on them.
|
0.00 |
|