|
MF 750 Transom Step/Handle
Features:
1/4" Mounting Holes
Black
Step/Handle
6-5/8" Long x 2-9/16" Deep
Transom
Marelon
|
13.42 |
|
|
Black & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' Hose
This recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower.
Features:
Push-Button sprayer
ABS handle with an attached lanyard for easy pull-out
Mounting hardware is included
Black with 6 ft. black nylon hose
Specifications:
Water Connection: 3/8 in. BSP-F threaded fitting on the hose
Mounting Hole: 2-3/4 in. diameter
Shipping Weight: 4 lbs.
*The "P" within the part number indicates retail packaging
|
123.94 |
|
|
White & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' Hose
This recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower.
Features:
Push-Button sprayer
ABS handle with an attached lanyard for easy pull-out
Mounting hardware is included
White with 6 ft. black nylon hose
Specifications:
Water Connection: 3/8 in. BSP-F threaded fitting on the hose
Mounting Hole: 2-3/4 in. diameter
Shipping Weight: 4 lbs.
|
122.71 |
|
|
MF 765/8 Cleat (834030)
Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry.
The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion. Marelon will also prevent our cleats from softening on hot days or freezing in winter.
|
11.35 |
|
|
MF 673 1" Mounting Clip
Features:
Tiller extension retaining clip
Fits 1" tubing
|
5.65 |
|
|
MF 840 Vented Loop - 1-1/2"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/2" (38.1mm)
Height: 5-1/4" (133.35mm)
Width: 7-3/4" (196.85mm)
|
25.96 |
|
|
MF 842 Vented Loop - 3/4"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 3/4" (19.05mm)
Height: 4-1/2" (114.3mm)
Width: 3-3/4"" (95.25mm)
|
23.22 |
|
|
MF 843 Vented Loop - 5/8"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 5/8" (15.87mm)
Height: 4-1/2" (114.3mm)
Width: 4" (101.6mm)
|
29.46 |
|
|
MF 844 Vented Loop - 1"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1" (25.4mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
33.49 |
|
|
MF 845 Vented Loop - 1/2"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1/2" (12.7mm)
Height: 5-1/4" (133.35mm)
Width: 4-1/4" (107.95mm)
|
28.69 |
|
|
MF 839 Vented Loop - 1-1/4"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/4" (28.57mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
33.49 |
|
|
MF 847 Vented Loop - 1-1/8"
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
Specifications:
Barb Size: 1-1/8" (28.57mm)
Height: 7" (177.8mm)
Width: 9" (228.6mm)
|
38.27 |
|
|
MF 841 Vent Cap Assembly
Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids.
|
9.56 |
|
|
Groco Sa-750 3/4" Monel Raw Wtr Strainer
Groco- Monel Screen Water Strainer 3/4”
|
544.50 |
|
|
Groco Asa-750 3/4 Strainer W/Ss Enclosure
Groco- 3/4” Strainer with Stainless Steel Enclosure
|
480.00 |
|