|
Free Standing Mount
FLIR Free Standing Mount for FLIR's AX8™ and Raymarine Dragonfly 4/5/7.
|
39.98 |
|
|
Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB Top
A 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean going boats. Will not work with 24” satdomes. This will clear 20” satdomes or smaller
|
816.00 |
|
|
3187 Stainless Steel Ratchet Mount
Similar in design and appearance to the current 4187 mounts, the 3187 Stainless Steel Ratchet Mount is a versatile, free-standing mount with a four-way ratchet design. It can be used to mount vertical or horizontal surfaces (deck or bulkhead) and adjusted to a slanted surface.
Features:
Quick action release handle- easily raise & lower antenna
Standard 1" - 14 threads
Cable slot for easy installation
Matches 4187 bolt hole footprint
Installation hardware not supplied
|
43.19 |
|
|
APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 3.5/4.5 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
B & G - HALO 20, 20+, 24 radars
Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars
Humminbird - HB 2124 CHIRP radar
KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars
Lowrance - 3G/4G radars
Raymarine - Quantum (Q24C), Quantum 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars
Sitex - RADARpc 4D radar
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
APT-F-150-02 Aluminum PowerTower® Radar Mount - 6" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars
Humminbird - AS 21RD4KW radar
Intellian - i1 radar
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
KVH - TracVision M1 and TV1 radars
Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Majestic - SATMAR32 radar
Navman - 18" and 24" Series 8000 radars
Nobletec - 2kW (20") radars
Northstar - 18" and 24" M Series/8000i
Raymarine - 33STV radar
Seiwa - SWR-1, 8 and 9 radars
Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 5.91" (150mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
307.13 |
|
|
APT-F-250-02 Aluminum PowerTower® Radar Mount - 10" Forward Leaning
The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish. Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability.
Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.
By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar.
There is a PowerTower® to fit pretty much every modern radar.
Compatible with:
Furuno - 1621, 1622, 1623, 1715, 1724, 1734, 1824, 1832, 1834, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D, DRS4D-NXT, DRS4W, 18" and 24" NavNet radars
Humminbird - AS 21RD4KW radar
Intellian - i1 radar
Interphase - Mini RE-1, RE-8 radars
JRC - 1000, 1000mk2, 1066, 1500, 1500mk2, 1800, 2000, JMA 2343 / 5104 (Radome: NKE-2042) radars
Koden - 2kW 12" radar
Lowrance - 3G/4G, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Navman - 18" and 24" Series 8000 radars
Nobletec - 2kW (20") radars
Northstar - 18" and 24" M Series/8000i
Seiwa - SWR-1, 8 and 9 radars
Simrad - 3G/4G, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-1, 8, 12, NKE-1066 radars
Techmarine - T-72.01, 72.02, 72.04 radars
Features:
Designed to fit the most up to date radars
Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower®
No need to cut the radar’s connectors off for installation
Constructed from the best Marine grade Aluminium
A range of accessories light bars can be bolted to the back of the PowerTower®
Technical Specifications:
Radar Type - Dome
Material - Aluminium
Height - 9.84" (250mm)
Mounting Type - Forward leaning - 33°
In the Box:
Mount
Mounting hardware (excluding screws/bolts)
Installation manual
*Sold as an Individual
|
313.87 |
|
|
LL-C 5" Flush Cover f/Globemaster, Super Yacht & SuperSport Flush Mount Compasses - White
Protective cover for Globemaster, Super Yacht and SuperSport flush mount compasses (must have low level lighting).
For: FB-500, SF-500, SS-5000, SS-5000W, SY-500LL, and SY-500LLC
Approx. Shipping Weight: 1lb
|
41.15 |
|
|
From now until December 31st, 2011, enjoy FREE unlimited updates when you purchase Navionics Hotmaps Premium, Hotmaps Platinum, Fish'N Chip, Gold or Platinum Plus products. See our complete Navionics line at
http://www.clrmarine.com/462m4/cartography-navionics.html
Otterbox has not released there new product yet. Our Distributor has 800 OTTERBOX DEFENDER SERIES APPLE IPOD TOUCH 4TH GENERATION on order and have 499 of those commited to customers at this time. See all 225 Otterbox items at
http://www.clrmarine.com/462m4/manufacturers/otterbox.html
|
|
|
LTBSF3 Light Bar for Thermal Camera FLIR M300 Series for M2 Mounts Only - Must Pick a LTB Top
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What's also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance.
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
Many Styles
There are many different styles of Seaview light bars so you can be sure to get one that will work with your specific application. Styles for closed dome radars, satellite domes, open array radars and cameras/search lights.
|
2112.00 |
|
|
Cockpit Marine Trim Gauge - for Mercury/Volvo/Yamaha 2001+ Engines - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price/performance ratio.
Features:
For Mercury/Volvo/Yamaha 2001+ Engines
Works with all OEM Merucry, Volvo Penta and 2001-Current Yamaha trim senders
12V Illumination bulb
Connection: M4 Stud
Input Type: Analog
Mounting Hardware: Included
Max Range Outer Scale: Down - Up
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part)
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PP4410 PowerPod Pre-Cut for Garmin STRIKER™ 5dv (Requires Flush Mount Kit Garmin Part) - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
Striker Base Gunnel Mount
F16-0150-F
The TACO Striker skiff flush mount base is the strongest gunnel mount base on the market today.
12 locking positions with our hex nut design including stand up and lay down.
Manufactured to very high standards using marine grade cast 316 stainless steel.
Ambidextrous arms. (will fit both port and starboard bases).
Welded locking adapter for maximum strength.
Removable arms for unobstructed decks.
Template included for installation.
Bases compatible with Lee™, Perko™, & Rupp™ outrigger poles
|
560.89 |
|
|
Discharge Pump Repair Kit for Marine Elegance & Atlantes Freedom Vortex Vac Toilets
Kit Includes:
1 Motor Shaft Seal 31-102P
1 O-ring 221105
1 ME: Joker Valve 221135
1 ME: Joker Valve Insert 221146
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.62 |
|