Weather Cover for Joystick Control Unit FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover. Features: Protective covering Protects the electronics of your Joystick Control Unit (JCU) Guards against moisture, salt and other irritants found in marine environments

JCU-2 Joystick Control Unit & POE Injector Kit JCU-2 Joystick Control Unit The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes  Joystick Control Unit (JCU2) Mounting hardware Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit. Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack  POE injector

JCU-1 Joystick Control Unit & Poe Injector Kit The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

JCU-1 Joystick Control Unit for M-Series - RJ45 Connection The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity

MD-324 Thermal Night Vision Camera with Joystick Control Unit This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series' display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space. Now even small boats can see clearly at night with the MD-Series Fixed Mount Thermal Night Vision Camera from FLIR. The MD-324 features a 320 x 240 pixel thermal imager with a wide angle 19mm lens, a 2X digital zoom allowing you to magnify distant targets for enhanced viewing and identification & 30Hz refresh for smooth, clear images. The MD-Series delivers stunning detail and clarity day or night thanks to its state-of-the-art FLIR thermal imaging technology. The camera can easily detect floating objects, navigation aids, other vessels, and even people in the water with ease. Engineered for smaller cruising, fishing and sailing vessels, MD-Series is both compact and lightweight. The camera measures 5.9" in diameter and just 7" high. The small footprint allows the camera to easily mount on any T-top, cabin roof, radar arch or mast. Features: Available in 320 x 240 2x e-zoom standard Ethernet-enabled for simple integration into your current electronics Slim profile (7" high and only 3 pounds) makes for an unobtrusive mount *Comes with a Joystick Control Unit

MD-625 Static Thermal Night Vision Camera with Joystick Control Unit This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series' display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space. Now even small boats can see clearly at night with the MD-Series Fixed Mount Thermal Night Vision Camera from FLIR. Fast-moving crafts will appreciate the enhanced long-range performance of the MD-625 camera with a high-resolution 640 x 480 thermal imager and 25mm lens. The MD-625 has a 2X and 4X digital zoom for enlarging distant targets & 30 Hz refresh for smooth, clear images. The MD-Series delivers stunning detail and clarity day or night thanks to its state-of-the-art FLIR thermal imaging technology. The camera can easily detect floating objects, navigation aids, other vessels, and even people in the water with ease. Engineered for smaller cruising, fishing and sailing vessels, MD-Series is both compact and lightweight. The camera measures 5.9" in diameter and just 7" high. The small footprint allows the camera to easily mount on any T-top, cabin roof, radar arch or mast. Features: 640 x 480 resolution 4x e-zoom Ethernet-enabled for simple integration into your current electronics Slim profile (7" high and only three pounds) makes for an unobtrusive mount *Comes with a Joystick Control Unit

JCU-2 Joystick Controller The joystick is the primary control for the M400 & M400XR and the M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes:  Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack 

Flir Standard Dual Station Accessory Kit for M-Series Includes: Joystick control unit with weather cover, 25' shielded ethernet cable (RJ-45), Qty 2 12V power over ethernet injectors, and mounting hardware.

Flir Deluxe Dual Station Accessory Kit for M-Series Includes: Joystick control unit with weather cover, 25' shielded ethernet cable (RJ-45), 25' video cable, 50' video cable, video amplifier/splitter, Qty 2 12V power over ethernet injector, and mounting hardware

JCU3 Compact Joystick for M100/200 - Raymarine RayNet Network FLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces. The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard. The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200 (M132, M232) M300, (M300, M332, M354, M364c, M364C LR.

M400 Stabilized Thermal/Visible Camera with JCU - 640 x 480  Multi-Sensor Marine Thermal Night Vision The FLIR M400 thermal night vision camera is a versatile, high-performance pan/tilt marine camera system designed for best-in-class short and long-range target identification. The FLIR M400's advanced 640 x 480 sensor delivers crisp thermal video images in total darkness and low-light conditions. An integrated HD color visible camera and tight-beam LED spotlight augment target identification for added safety. The FLIR M400 has a continuous optical zoom lens (up to 4X) that allows operators to see other vessels and targets at longer ranges. Active gyro-stabilization ensures a steady image, plus radar tracking and optional video tracking keep potentially dangerous targets in view at all times. Features: High-intensity LED spotlight M400 - HD Color Lowlight | FLIR Marine HD Color lowlight camera with 30x optical zoom M400 - High resolution thermal sensor | FLIR Marine High resolution 640 x 480 thermal sensor with optical zoom 18° to 6° horizontal field of view Gyro Stabilised | FLIR Marine Gyro-stabilised to ensure steady viewing in heavy sea conditions Waterproof enclosure | FLIR Marine Rugged, waterproof gimbal enclosure with 360x pan and +/-90° tilt capacity Easy-to-use joystick | FLIR Marine Easy-to-use joystick control unit Radar tracking identifies and tracks specified radar returns, enhancing vessel safety when visibility is low Step up to the M400XR with integrated video tracking. Lock on and automatically follow objects as long as they're in view of the camera Digital Detail Enhancement (DDE) assures a crisp thermal image, even in scenes with extreme temperature dynamics Applications: Short and Long-range Detection - Recognize marine traffic and key landmarks at night Thermal and Visible-Light Payloads - Combination thermal detection and visible identification Enhanced Target Identification - Operators can precisely locate and track object

M400XR Stabilized Thermal/Visible Camera with JCU & Marine Fire Fighting Software - 640 x 480 Multi-Sensor Marine Thermal Night Vision The FLIR M400XR thermal night vision camera is a versatile, high-performance pan/tilt marine camera system designed for best-in-class short and long-range target identification. The FLIR M400XR's advanced 640 x 480 sensor delivers crisp thermal video images in total darkness and low-light conditions. An integrated HD color visible camera and tight-beam LED spotlight augment target identification for added safety. The FLIR M400XR has a continuous optical zoom lens (up to 4X) that allows operators to see other vessels and targets at longer ranges. Active gyro-stabilization ensures a steady image, plus radar tracking and video tracking keep potentially dangerous targets in view at all times. Features: High-intensity LED spotlight M400 - HD Color Lowlight | FLIR Marine HD Color lowlight camera with 30x optical zoom M400XR - High-resolution thermal sensor | FLIR Marine High resolution 640 x 480 thermal sensor with optical zoom 18x to 6x horizontal field of view Gyro Stabilised | FLIR Marine Gyro-stabilised to ensure steady viewing in heavy sea conditions Waterproof enclosure | FLIR Marine Rugged, waterproof gimbal enclosure with 360° pan and +/-90° tilt capacity Easy-to-use joystick | FLIR Marine Easy-to-use joystick control unit Radar tracking identifies and tracks specified radar returns, enhancing vessel safety when visibility is low M400XR with integrated video tracking. Lock on and automatically follow objects as long as they're in view of the camera Digital Detail Enhancement (DDE) assures a crisp thermal image, even in scenes with extreme temperature dynamics Applications: Short and Long-range Detection - Recognize marine traffic and key landmarks at night Thermal and Visible-Light Payloads - Combination thermal detection and visible identification Enhanced Target Identification - Operators can precisely locate and track object

M332 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 320x256 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

M364 Stabilized Thermal IP Camera Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M364 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions. SAFE NAVIGATION IN LOW VISIBILITY ENVIRONMENTS  Thermal imaging offers vision in complete darkness, glare, and light fog. Powered by the breakthrough FLIR Boson thermal imaging core Thermal resolution 640 x 512 VOx Microbolometer Smooth image refresh rates up to 30 Hz Pan/Tilt Adjustment Range360° Continuous Pan, +/- 90° Tilt Advanced onboard image processing technology ClearCruise Augmented Reality-enabled when paired with Raymarine Axiom MFDs A STEADY VIEW IN ROUGH SEAS Stable viewing in heavy seas keeps eyes on-target.  Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw Integrated AHRS (Attitude Heading Reference Sensor) Horizontal stabilization automatically keeps the camera on scene as you maneuver SEAMLESS INTEGRATION Exceptional connectivity with navigation and security systems. Optional joystick control unit and multifunction navigation display integration (JCU2) ONVIF-compliant for PTZ security camera functionality H.264 IP video stream, HD-SDI lossless, and analog video output Included: M300 Camera Camera base-seal Camera gasket RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.) Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.) Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.) Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.) Mounting riser 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs 2 x self-adhesive decals (for ball-down mounting only) Documentation pack

RJ45 Waterproof Connector FLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord. FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.