|
Quiet Quad' Water System Pumps
Features:
Intermittent duty
Self-primes up to 2.4m vertical lift
The four-piston design delivers higher flow rates
Quick-connect plug-in ports for easy installation
Pressure-switch control to run the pump only as needed
Specifications:
Voltage: 12 (VDC)
Flow Rate: 3.2 US Gallons/Min (12.1 Litres/Min)
Pressure Switch Setting: 22psi (1.5 bar) Cut In, 35psi (2.4 bar) Cut Out
Amp Draw: 3.9 (amp)
Port Type: 1/2" Hose & 1/2" Thread included
Bypass: Included
|
129.35 |
|
|
Quiet Quad Water System Pump - 115VAC
Features:
Intermittent duty
Self-primes up to 2.4m vertical lift
The four-piston design delivers higher flow rates
Quick-connect plug-in ports for easy installation
Pressure-switch control to run the pump only as needed
Specifications:
Voltage: 115 (VAC)
Flow Rate: 3.3 US Gallons/Min (12.5 Litres/Min)
Pressure Switch Setting: 22psi (1.5 bar) Cut In, 35psi (2.4 bar) Cut Out
Amp Draw: 0.4 (amp)
Port Type: 1/2" Hose & 1/2" Thread included
Bypass: Included
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
197.52 |
|
|
Flojet Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
March 809 BRC HS 12VDC Mag-Drive Pump
March Mag-Drive Centrifugal Pumps Bronze 12VDC High Speed 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
499.69 |
|
|
March Mag-Drive Centrifugal Pumps Bronze Center Inlet 12VDC 5.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
479.06 |
|
|
March 809 BR 12VDC
Applications for the 809-BR 12V & 24V Magnetic Drive Pump include hot water systems, refrigeration systems and solar heating.
March Pump's industrial 809-BR 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 5 gallons per minute at 1.5 feet, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
5 GPM
18.9 LPM
Max Head
7.1 FT
2.1 M
Power
.01 HP
.007 KW
Electrical
12V Range 0-14 or 24V Range 0-26
|
459.23 |
|
|
Primetime Pump 12VDC
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
Applications:
Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling
Agricultural pump
Industrial pump
SPECIFICATIONS:
Flow: Up to 21 GPM
Head Feet: Up to 23’
Housing: 316 Stainless Steel (Investment Cast)
Cover: 316 Stainless Steel
Impeller: 316 Stainless Steel Semi-Open
Wearplate: 316 Stainless Steel
Mechanical Seal: Carbon / Ceramic / Viton Bellows
O-ring/Flapper: Viton
Weight: 13 lbs
Motor is painted White
|
684.06 |
|
|
Flojet 20799-000 Tank Accumulator
Flojet Accumulator Tank 20799-000
Total Tank Volume 1.1 Gallons, Maximum Pressure 125 PSI, Replacement Tank for Flojet 02840 Series Water Systems.
|
262.77 |
|
|
4-Gallon Salt Feed System with 12VDC Pump
The 4-Gallon Salt Feed System with 12VDC Pump is designed for boats that operate in fresh or brackish water and can only be used with LectraSan® MC™ or electro-scan® Type I MSDs. Salinity is monitored by the unit's Control Panel and salt solution will automatically be added to the MSD when needed.
Pressurized freshwater is required. Minimum of 15 psi (103 kPa) working pressure.
Operation
Solar salt is added directly to the tank. Water supplied by the boats pressurized freshwater maintains the water level in the tank and continues to make saturated salt solution from the solar salt. A pump is used to add salt solution directly into the treatment tank when needed. The pump is controlled by the circuit board that monitors the electrode current in the treatment tank and automatically turns on the pump when salt is required.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
520.98 |
|
|
SHURflo 80-120-00
The 115 volt Shurflo 80-120-00 Home RO water system Pump.
This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.
Up to 50 GPD
115VAC Input
Safe Low Voltage Motor
Continuous Duty
80 PSI Bypass
1/4" Quick Connect Fittings
Includes Full Tank Shutoff Switch
|
578.51 |
|
|
March 809-BR-HS 12V Mag Drive Pump
Applications for the 809-BR-HS 12V Magnetic Drive Pump include hot water systems and solar heating.
March Pump's industrial 809-BR-HS 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 2.5 feet, and its maximum head is 15.5 Feet (or around 6.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Bronze, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.04 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 150PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.
Max Flow
6 GPM
22.7 LPM
Max Head
15.5 FT
4.7 M
Power
.04 HP
.029 KW
Electrical
12V Range 0-14 or 24V Range 0-26
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Bronze (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
|
465.08 |
|
|
Jabsco 30450-0024 24Vdc Water System Pump
|
579.46 |
|
|
PAR-Max 3
3.5 GPM Water System Pump
Shower Drain and General Purpose Pump
Features:
Self-Priming
Runs Dry Without Damage
Smooth Flow
Four Piston, Diaphragm Sealed
Powerful Motor
Snap-In Swivel Ports
Meets USCG & ISO 8846 Ignition Protection Standards
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
179.17 |
|