|
Quiet Quad Water System Pump - 115VAC
Features:
Intermittent duty
Self-primes up to 2.4m vertical lift
The four-piston design delivers higher flow rates
Quick-connect plug-in ports for easy installation
Pressure-switch control to run the pump only as needed
Specifications:
Voltage: 115 (VAC)
Flow Rate: 3.3 US Gallons/Min (12.5 Litres/Min)
Pressure Switch Setting: 22psi (1.5 bar) Cut In, 35psi (2.4 bar) Cut Out
Amp Draw: 0.4 (amp)
Port Type: 1/2" Hose & 1/2" Thread included
Bypass: Included
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
197.52 |
|
|
Quiet Quad' Water System Pumps
Features:
Intermittent duty
Self-primes up to 2.4m vertical lift
The four-piston design delivers higher flow rates
Quick-connect plug-in ports for easy installation
Pressure-switch control to run the pump only as needed
Specifications:
Voltage: 12 (VDC)
Flow Rate: 3.2 US Gallons/Min (12.1 Litres/Min)
Pressure Switch Setting: 22psi (1.5 bar) Cut In, 35psi (2.4 bar) Cut Out
Amp Draw: 3.9 (amp)
Port Type: 1/2" Hose & 1/2" Thread included
Bypass: Included
|
129.35 |
|
|
Flojet Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
SHURflo 80-120-00
The 115 volt Shurflo 80-120-00 Home RO water system Pump.
This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.
Up to 50 GPD
115VAC Input
Safe Low Voltage Motor
Continuous Duty
80 PSI Bypass
1/4" Quick Connect Fittings
Includes Full Tank Shutoff Switch
|
578.51 |
|
|
Flojet 20799-000 Tank Accumulator
Flojet Accumulator Tank 20799-000
Total Tank Volume 1.1 Gallons, Maximum Pressure 125 PSI, Replacement Tank for Flojet 02840 Series Water Systems.
|
262.77 |
|
|
Raritan PHII PUMP Phii Pump Assy Complete
|
468.75 |
|
|
Gianneschi ECOJET-1B-24V Water System Pump
Gianneschi ECOJET-1B-24V, ECOJET Series Jet Pump and Motor
Bronze construction
Brass impeller
316 Stainless Steel Shaft
Motor is 0.3 KW (0.4 Horsepower) 2900 RPM, 24 Volts DC.
Applications for the ECOJET1B24V include marine applications to pump fresh water and seawater, diesel oil liquids, non inflammables and liquids without any suspended parts. Most common uses are for sanitary systems, water supply for water pressure system, deck and chain washing, and fire fighting.
|
1518.07 |
|
|
Jabsco 30450-0024 24Vdc Water System Pump
|
579.46 |
|
|
PAR-Max 3
3.5 GPM Water System Pump
Shower Drain and General Purpose Pump
Features:
Self-Priming
Runs Dry Without Damage
Smooth Flow
Four Piston, Diaphragm Sealed
Powerful Motor
Snap-In Swivel Ports
Meets USCG & ISO 8846 Ignition Protection Standards
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
179.17 |
|
|
Gianneschi ECOJET-2B-24V Water System Pump Only
|
1704.78 |
|
|
Marine Pumps & Accessories
Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.
Quad Water System Pumps
Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.
The RV Macerator Pump
Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.
Specials Closeouts Remanufactured Rebates
|
|
|
Check all of your impellers contained within the engine cooling pumps, bilge pumps, ballast pumps, and so on. One of the biggest contributors to impeller deterioration and damage is sitting idle in the same position for several months, so a proper check of the impeller(s) is vital to a reliable operation of the boat after storage and/or no operation.
Replacing an impeller is a fairly easy and straightforward process and one that you have probably done in the past. It is important to use the right tool to remove an impeller from the pump. Channel lock or needle-nose pliers are fine, but using an impeller removal tool is the best choice. Never use a screwdriver to pry an impeller out of a pump; you could accidentally score the bronze housing which can lead to leaks. Make sure you know how the impeller is being held in place. Some are sealed to the shaft with an O-ring; others are held in place with a set screw and others with a c-clip.
Make sure to check the pump and the water lines for any trash or chunks of rubber that may have broken off from the impeller. Even the smallest blockage can cause major engine cooling and overheating issues. Also, remember to properly lubricate your new impeller with Vaseline or the lubricant included with the new impeller. This will reduce friction for a brand new impeller on a dry startup.
Most importantly, make sure you are using the right impeller for the application. We have seen many instances of people who have replaced an impeller with something that is close to the original, but not exactly right, and this can cause major problems for the engine once normal operation resumes. You cannot match the size of the used impeller to a new one to determine the replacement, as a used impeller can be swollen and disfigured from its original specifications. The best method is to obtain the impeller number off of the impeller itself, usually located on the edge of the shaft hole of the impeller, or obtain the part number of the pump, usually stamped into the bronze housing.
You can find just about every impeller that needs to be replaced at CLR Marine. We carry Sherwood, Jabsco and Globe just to mention a few. We also carry many of the miner and major rebuild kits for many pumps. A minor repair kit consists of the impeller and any gaskets or O-rings that may be needed to replace the impeller. Our major rebuild kits include everything to rebuild that pump except for the shaft. All kits are put together at time of order so you will always see the Quantity on Hand as 0.
|
|
|
Flojet 04300-525A 115V 3.3Gpm S/V Sw45
Flojet 04300525A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 5 GPM, 35 PSI, 115VAC
Polypropylene Pump & Motor Assembly
The Flojet 04300525A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm.
The Flojet 04300525A pump includes 3/4" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 5 GPM. Quiet, smooth, and safe operation!
Specifications and Benefits:
5 GPM
35 PSI
115 volt AC
3/4" hose barb inlet
3/4" hose barb outlet
Polypropylene housing
Viton check valve
Santoprene diaphragm
6' power cord
Snap-in ports for easy installation
130° Fahrenheit maximum fluid temperature
Built-in pressure switch automatically starts and stops
Can run dry without damage
Excellent self-priming capability (up to 8 feet vertical)
Powerful magnet motor with low current draw
4 piston design delivers high flow rates
Handles water-like and viscous liquids up to 250 cP
CE Certified
|
327.51 |
|