RV Macerator Pump Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon. The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience! Features: A neat and clean way to quickly evacuate waste tanks Empty black-water and greywater Holding Tanks at home Grinds waste as it pumps Built-in Impeller Protection Device...longer life! The flow of up to 13 GPM for fast, clean Holding Tank evacuation Easy to Install Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home. Applications Empty holding tanks and avoid dump stations Transfer waste from recirculating toilets to main holding tank Impeller Release Feature After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown. Specifications: Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate Impeller: "Jabsco Nitrile" compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum Seal: Lip Type Ports: Inlet RV model - 3" (76mm) hose Outlet - 1" (19mm) Hose Barb Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry Complies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition Protection Weight: 3.5lb (1.6 kg) Approx. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Portable Self-Priming RV Macerator Waste Pump Kit - 12V The Flojet 18555-000 DC portable waste pump is the ideal solution for emptying holding tanks on recreational vehicles and avoiding dump stations. The macerator section grinds waste down to a particle size of 1/8" maximum so it can easily be pumped through a garden hose (5/8" minimum). The pump section is self-priming, permitting the unit to be mounted above the tank in a convenient location. Empties most recirculating toilets in less than 2 minutes; empties a typical 30-gallon holding tank in less than 3 minutes. The 18555-series waste pump will macerate and pump all waste and tissue normally found in recreational vehicle waste systems. *IT WILL NOT HANDLE HARD SOLID OBJECTS, SANITARY NAPKINS, OR RAGS Features: Connects directly to the RV waste outlet Eliminates 3" (75mm) sewer hose Garden hose discharge port Freshwater rinse capabilities Remote handheld on/off switch with 6' (1.8M) wire harness Ability to dump longer distances Ability to drain holding tanks at home Easy cleanup and storage Rugged portable storage case USCG and CSA listed Run dry protection WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RV Water Pump - 12V - 1GPM - 35PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC 1 GPM (3.8 LPM) 35 PSI (2.4 BAR) Port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RV Water Pump with Strainer - 12V - 3GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RV Water Pump with Strainer - 24V - 3GPM - 50PSI Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.  All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well. Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

  Flojet Marine Pumps & Accessories   Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.     Quad Water System Pumps   Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy.     The RV Macerator Pump   Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.     Specials    Closeouts   Remanufactured    Rebates  

Marine Pumps & Accessories Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.  Quad Water System Pumps Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy. The RV Macerator Pump Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon. Specials    Closeouts   Remanufactured    Rebates  

Marine Pumps & Accessories Flojet is the leading manufacturer of marine pumps and accessories. With over 20 years experience in pump design and manufacturing, Flojet is committed to providing quality products for your boating needs.  Quad Water System Pumps Self-priming diaphragm pump with built-in pressure switch that automatically starts and stops pump when discharge valve opens and closes. The compact design and plug-in port fittings make installation easy. The RV Macerator Pump Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon. Specials    Closeouts   Remanufactured    Rebates  

No matter whether you are an experienced boater looking for a replacement pump or a manufacturer specifying pumps for your marine application, we are prepared to provide you with the support you need. And no matter where you work or live, access to our products, services, spare parts and support are never far away. In fact, you will find SPX FLOW's Johnson Pump marine brand represented in every major industrial country of the world today and in more than sixty nations altogether.   SHOP JOHNSON PUMP     The Aqua Jet five chamber diaphragm pump provides the perfect water pressure or deck wash solution for both small and medium sized leisure and commercial boats as well as mobile homes, campers and summer homes.     Quiet and pulsation-free even at low speeds. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium-such as in shower and galley applications. Integrated pressure switch turns pump on and off automatically when tap is opened and closed. Operates in fresh or sea water.   SHOP THE Aqua Jet five chamber diaphragm pump     Specials    Closeouts    Remanufactured    Rebates  

Flojet 18555-000A Portable Rv Macerator Flojet Macerator Pump System for RV 12V, Up to 12.5GPM, 3” RV Direct Connection, Garden Hose Discharge Port, Wired Remote Control

JABSCO 37056-2000 MACERATOR CHOPPER KIT Replacement macerator chopper plate kit This is part #3 for Flojet 18590 series pumps This is part #5 for Jabsco 22130 series pumps Includes chopper blade and lock nut

Macerator Pump - 12v w/Barb Adapter Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry. Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested. Features: All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Proprietary rubber impeller compound allows longer dry running time Specifications: Pump: Self priming Flexible rubber impeller with stainless steel wearplate Impeller: Raritan Proprietary Nitrile compound Blade: Stainless steel double cut Seal: Viton Lip with 316 SS spring and case Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male Outlet: 3/4" MNPT Lead wires: 14 GA, Red and black Weight: 5 lbs. Approvals: Ignition protected, ISO 8846 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Macerator Pump - 12v w/Barb Adapter Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry. Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested. Features: All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Proprietary rubber impeller compound allows longer dry running time Specifications: Pump: Self priming Flexible rubber impeller with stainless steel wearplate Impeller: Raritan Proprietary Nitrile compound Blade: Stainless steel double cut Seal: Viton Lip with 316 SS spring and case Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male Outlet: 3/4" MNPT Lead wires: 14 GA, Red and black Weight: 5 lbs. Approvals: Ignition protected, ISO 8846 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Macerator Pump - 24v w/Barb Adapter Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry. Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested. Features: All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Proprietary rubber impeller compound allows longer dry running time Specifications: Pump: Self priming Flexible rubber impeller with stainless steel wearplate Impeller: Raritan Proprietary Nitrile compound Blade: Stainless steel double cut Seal: Viton Lip with 316 SS spring and case Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male Outlet: 3/4" MNPT Lead wires: 14 GA, Red and black Weight: 5 lbs. Approvals: Ignition protected, ISO 8846 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Macerator Pump - 24v w/Waste Valve Macerator pumps are the key to a number of important chores on a boat! The most important is to work when it is needed. While macerator pumps are generally used to empty holding tanks they can also be used to empty fish boxes. Raritan had two goals in mind when it set out to design a better macerator. The first is the run dry time because as most owners know when you flip the switch to begin emptying the tank you don’t always remember to turn it back off and the number one enemy of any macerator pump is running without liquid going thru it. Nothing destroys a pump faster than running dry. Raritan developed a plastic housing and impeller combination that resists burnout longer than any macerator on the market today. To try and prevent these things from ruining a trip Raritan also designed the Smart Macerator Control which has several key design features. Probably the most relevant is the ability to shut the pump off as soon as it senses it is running dry. An all to common problem with macerators is the fact they sit for extended periods of time so the macerator control is also designed to “jog” the impeller once a week when power is on. This “jog” prevents the impeller from taking a shape and helps to ensure the pump will empty the tank when requested. Features: All stainless steel bolts to avoid corrosion problems Spring loaded Viton shaft seal is used to prevent premature leaks Proprietary rubber impeller compound allows longer dry running time Specifications: Pump: Self priming Flexible rubber impeller with stainless steel wearplate Impeller: Raritan Proprietary Nitrile compound Blade: Stainless steel double cut Seal: Viton Lip with 316 SS spring and case Motor: Permanent magnet type, fully enclosed, stainless steel shaft, thermal protection for overload, Powder coated housing with sealed ball bearing Ports: Inlet: 1-1/2" hose barb & 1-1/2" NPT Male Outlet: 3/4" MNPT Lead wires: 14 GA, Red and black Weight: 5 lbs. Approvals: Ignition protected, ISO 8846 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.