|
Gun Bore Cleaner
Bored? Clean Your Gun.
The Flitz Bore Cleaner will remove the plastic wad, copper and powder fouling which is not visible to the naked eye, but must be removed to maintain the accuracy of your firearm.
Features:
Eliminates the need for other cleaners
Safely cleans and protects without messy foam applications
Contains no ammonia
Environment friendly
Non-abrasive
Non-flammable
Safe on Factory Gun Bluing, Stainless and Nickel Firearms
|
13.38 |
|
|
Tumbler/Media Additive - 7.6 oz. Bottle
Flitz Tumber/Media Additive will not harm ANY METAL or Primer. Will not stress brass. No Ammonia. No Buildup. Suitable for corn cob, walnut or other media. Cuts tumbling time in half. Cleans, polishes & protects brass & nickel. Eco-safe product.
Features:
Liquid Formula, eco-friendly
Safe for ALL metals and primer
Cleans and polishes brass, copper and more
Suitable for Corn Cob, Walnut or other Media
|
13.38 |
|
|
Polish - Liquid - 7.6 oz. Bottle
Part #: LQ 04587
A diluted version of the original paste formula, this product is a high-performance cleaner and polish in a liquid form. Specially formulated to clean and polish with the ease and economy of a liquid, this concentrated formula goes three times farther than other liquids and leaves a brillant shine in half the time.
Cleans & Polishes:
Brass
Copper
Silverplate
Sterling Silver
Chrome
Stainless Steel
Nickel
Bronze
Solid Gold
Aluminum
Anodized Aluminum
Pewter
Factory Hot Gun Bluing
Removes:
Tarnish
Rust
Water stains
Heat discoloration
Oxidation
Fingerprints
Not suitable for: Electroplated Finishes
|
13.38 |
|
|
Rifle, Gun & Knife Wax
Part #: GW 02785
A premium white carnauba and beeswax formula that provides exceptional results on gunbluing, polished or hand-rubbed stocks, stainless and nickel firearms.
Features:
Safe on the interior and exterior
Will not attract dust or wash off in rain
Water-based
Contains no Solvents
UV and acid rain protection
Easy to apply and buff off, protects up to 6 months
Removes and Protects Against:
Rust
Fingerprints
Water Stains
Powder Residue
Tree Sap
Blood
Salt Deposits
Lime Deposits
|
13.38 |
|
|
Polish - Liquid - 16 oz. Bottle
Part #: LQ 04506
A diluted version of the original paste formula, this product is a high-performance cleaner and polish in a liquid form. Specially formulated to clean and polish with the ease and economy of a liquid, this concentrated formula goes three times farther than other liquids and leaves a brillant shine in half the time.
Cleans & Polishes:
Brass
Copper
Silverplate
Sterling Silver
Chrome
Stainless Steel
Nickel
Bronze
Solid Gold
Aluminum
Anodized Aluminum
Pewter
Factory Hot Gun Bluing
Removes:
Tarnish
Rust
Water stains
Heat discoloration
Oxidation
Fingerprints
Not suitable for: Electroplated Finishes
|
22.55 |
|
|
Tumbler/Media Additive - 16 oz. Bottle
Flitz Tumber/Media Additive will not harm ANY METAL or Primer. Will not stress brass. No Ammonia. No Buildup. Suitable for corn cob, walnut or other media. Cuts tumbling time in half. Cleans, polishes & protects brass & nickel. Eco-safe product.
Features:
Liquid Formula, eco-friendly
Safe for ALL metals and primer
Cleans and polishes brass, copper and more
Suitable for Corn Cob, Walnut or other Media
|
22.55 |
|
|
Cat Pump Crankcase Oil 21 oz. Bottle
Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6107 contains one 21 oz. bottle.
|
15.36 |
|
|
PP4408 PowerPod Pre-Cut f/Simrad GO7 and B&G Vulcan 7
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
PED4406 PedestalPod Pre-Cut f/Simrad NSS7 evo2/B&G Zeus2 7 - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
|
322.90 |
|
|
Description: 6" (15cm) 316 S.S. Hollow Base Cleat
Height: 1-1/4"
Fastener: 1/4" (4)
Weight: 7.6 oz
Material: 316 Stainless Steel
Fastener: 1/4"
Dimensions: L: 6" (15 cm) H: 1-1/4"
|
15.68 |
|
|
GP1080-06 SystemPod Pre-Cut f/Raymarine es95/es97/es98 & 2 Instruments (3.6" Hole) for 9.5" Wide Guard
GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards .
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
462.53 |
|
|
Sherwood G1508 Engine Cooling Pump for Ilmor 5.7/6
ENG COOLING PUMP for ILMOR 5.7/6
Used on various closed cooled Ilmor 5.7/6.0/6.2L OPS & 7.4L MPI
Inlet: 1-1/2"
Outlet: 1-1/2"
Replaces Ilmor MV8V-1121, MV8V-1121-CHARCOAL
Replaces Sherwood G1508, G-1508, G1508-01, G-1508-01
Fits Ilmor:
5.7L MPI OPS
6.0L MPI OPS
6.2L MPI OPS
7.4L MPI
|
814.30 |
|
|
Power Cord Adapter f/FL-8 & FL-18 Flasher - 12 VDC - 6'
Power Cord DC Adaptor for FL-8's and FL-18's 12 Volt Power Cable plugs into any standard cigarette lighter socket to power a dash mounted Vexilar flasher. The total length of the cord is 7ft.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
31.20 |
|
|
Tactical Matte Finish Cleaner
w/Powerful Degreasers
Instantly & Easily Removes: Fingerprints, oil, grease, water spots, soil, unwanted wax residue, carbon & other impurities.
Safe on: Flat / Matte finishes, parkerized finishes, Tactical finishes, Gun wraps, AR Firearms,brushed or polished stainless steel
Will NOT leave a shine - restores unwanted shiny surfaces back to matte
Will NOT remove bluing
Will NOT remove parkerized finish
Usage Temp: 30°-120°F
Environment friendly
Results Guaranteed
|
7.80 |
|
|
Gun Cleaner & Lubricant (CLP) - 8oz
Using a high-quality formula that is manufactured with care, STA-BIL Gun CLP is engineered to clean, lubricate, and protect your firearms. So, why did we create it?
Ever since its inception in 1958, the STA-BIL Brand has been dedicated to preserving the things you care about most. That is why we are proud to introduce a product that will keep your guns working in great condition.
The Gun CLP cleans away gun powder and residue, provides superior lubrication with a unique Anti-Wear additive, and protects against corrosion by displacing moisture. Even better, the product is highly versatile as it works well with pistols, rifles, and shotguns.
STA-BIL cares about your freedom and wants your firearms to be ready when you are. Allow our Gun CLP to keep them accessible and functioning at the highest level.
Features:
Protects against corrosion
Cleans. Lubricates. Protects.
Removes powder residue, bullet fouling, and other contaminates
Restores accuracy
Long-lasting, anti-wear additive for critical components
Improves operation of action
Provides a durable, non-hindering protective barrier
Directions:
Before using this product, make sure the weapon is unloaded. Twist top to open. Dispense a small drop of STA-BIL Gun CLP onto manufacturer-recommended locations of the gun for superior lubrication. This can also be used to clean and protect the gun’s components from corrosion and wear.
|
10.66 |
|