|
Single DIN Adapter Mounting Plate
The Fusion Single DIN Adapter Mounting Plate is specifically used for Fusion single DIN series units.
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.41 |
|
|
MIL-Plate 2 Single Din Adapter
Millenia's MILPLATE2 lets you mount a gauge-style receiver in an opening designed for a single-DIN (2" tall) marine receiver, and gives you a cutout for a USB input.
Features:
Black ABS Plastic
Single-DIN adapter for gauge-style receivers
Includes cutout for a USB port
Outer Dimensions (W x H x D) 10" x 4.69" x 0.25"
Cutout Opening (for receiver) - 3" (diameter) x 0.25" (depth)
Cutout Opening (for USB port) - 1.31" (diameter) x 0.25" (depth)
Screw Hole Spacing (W x H x D) - 9" x 2" x 0.25"
Compatible with:
MILPRV16
MILPRV17
MILPRV18
MILPRV19
JBLPRV170
JBLPRV175
JBLPRV275
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.68 |
|
|
MIL-Plate1 Single Din Adapter
Millenia's MILPLATE1 lets you mount a gauge-style receiver in an opening designed for a single-DIN (2" tall) marine receiver.
Features:
Black ABS Plastic
Single-DIN adapter for gauge-style receivers
Includes cutout for a USB port
Outer Dimensions (W x H x D) 10.06" x 4.69" x 0.25"
Cutout Opening (for receiver) (W x H x D) 5.5" x 3.56" x 0.25"
Screw Hole Spacing (W x H x D) - 9" x 2" x 0.25"
Compatible with:
MILPRV22
INFPRV250
INFPRV350
INFPRV450
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.68 |
|
|
2" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter is designed to install standard 1-1/8-in. gauges and meters into 2 in. instrument dash panel holes. The socket adapter is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Face Plate Outer diameter: 2-3/16 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 2 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.04
|
4.40 |
|
|
4" Gauge Power Socket Adapter Mounting Plate
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: Black
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
4" Gauge Power Socket Adapter Mounting Plate - White
This instrument hole adapter allows you to replace an unused 4 in. gauge with two new 1-1/8 in. style gauges. It is installed by placing the face plate in front of the dashboard and then inserting the socket/meter in the hole with the washer behind.
Features:
Designed with D-flats to prevent gauges from spinning, the assembly is held in place by the socket/meter nut for a clean, finished look
Constructed of UV-resistant injection-molded nylon
Specifications:
Color: White
Face Plate Outer diameter: 3-3/4 in.
Face Plate Inner Diameter: 1-3/16 in.
Face Plate Thickness: 3/16 in.
Height: 3-3/8 in.
Washer Inner Diameter: 1-1/16 in.
Washer Thickness: 1/8 in.
Weight: 0.06
|
7.79 |
|
|
MR500UAB Single Din Bluetooth MP3/WMA/AM/FM/USB Marine Radio
This Boss Audio radio is designed to last even when exposed to harsh marine environments.
Features:
Single-din fit
Bluetooth® hands-free
AM/FM receiver
Switchable US & EU tuner frequencies
Conformal-coated PCB
UV-protected front panel
Push-to-talk
Wireless remote control
50 watts x 4 channels
Inputs & Outputs:
USB port
USB charging (1A)*
Compatible with audio output from iPhones, smartphones, and MP3 players
Front and rear pre-amp outputs
Playback:
MP3/WMA
Bluetooth® audio streaming stream and control your favorite music apps
Dimensions:
Unit (L x W x H): 3.94 x 7.4 x 2.28 in.
Weight (lbs.): 1.1
Shipping Weight (lbs.): 1.15
GB Dimensions (H x L x W): 8.07 x 4.72 x 3.03 in.
GB Weight (lbs.): 1.15
MC Weight (lbs.): 11.5
|
59.93 |
|
|
Signature Series Flush Mount Kits - 7.7" Speakers
Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”].
The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat.
Compatible With:
Signature Series 3i 7.7" Classic Speakers
Technical Specifications:
Mounting Diameter Clearance - 8.46" (21.5 cm)
Mounting Depth Clearance - 4.41" (1.2 cm)
In the Box:
Two (2) flush mount baskets
Two (2) grilles
Mounting template
Documentation
*Sold as a Pair
|
81.56 |
|
|
Signature Series Flush Mount Kits - 6.5" Speakers
Designed with sleek and minimalistic design aesthetics, the Fusion Signature Series flush mount kits allow you to install Signature Series 3i classic-style speakers with a premium near-flat finish – mounting profile no thicker than 2 mm [0.08”].
The flush mount kit features a non-intrusive mounting system for easy installation. Simply place the kit into the cutout, then place the speaker (sold separately) into the kit, tighten the screws, and the tabs will tighten against the panel, keeping it in place without the need to create any screw holes in your boat.
Compatible With:
Signature Series 3i 6.5" Classic Speakers
Technical Specifications:
Mounting Diameter Clearance - 7.68" (19.5 cm)
Mounting Depth Clearance - 4.17" (1.06 cm)
In the Box:
Two (2) flush mount baskets
Two (2) grilles
Mounting template
Documentation
*Sold as a Pair
|
73.40 |
|
|
Vision Series Mounting Plate for Simrad HALO™ Open Array
Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.
The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style.
Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
89.99 |
|
|
RAM Flat Surface Horizontal Single Swing Arm Mount
The RAM single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
Dimensions:
Center of knob to center of ball socket: 6"
Overall length of swing arm assembly: 10.75"
Overall height: 5.6"
Height from base to top of knob: 4.91"
Material:
Powder Coated Marine Grade Aluminum
Note:The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
62.81 |
|
|
Mounting Plate for SG200 Display - Fits Smartguage™ Cutout
Balmar’s Award Winning, 2nd Generation Battery Monitor
Optional Adapter Plate for Fitting the SG200 Color Display into a Smartgauge™ Cutout
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
14.05 |
|
|
Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
142.20 |
|
|
Axiom™ Pro 16 Bracket Ball Mount Plate
This adapter plate allows your Axiom™ Pro 16 to easily be bracket or ball mounted. The rugged plate attaches to your Axiom Pro 16 and is compatible with most mounting solutions.
|
163.62 |
|
|
DIN Rail Mounting Kit
DIN rail mounting kit for use with USG-2.
|
15.67 |
|