Display Table Top Mounting Bracket with Knobs and Screws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PP4800-07 PowerPod Pre-Cut for Raymarine AXIOM 9 (Pre-Cut for Surface Mount Using Rear Mounting Brackets, Requires Raymarine Right Angle Connector) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

P4 Color Pack - Fluxgate Compass & Rotary Feedback for Commercial Boats *Deck Mount Bracket Optional Features: IST – Intelligent Steering Technology provides superior vessel steering capability ADAPTIVE steering for sea conditions and varying vessel speeds AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration WORK Mode suitable for Towboats and Workboats NMEA 2000, ETHERNET, and NMEA 0183 interface Configurable for Fishing, Offshore Vessels, Workboats, Towboats and Yachts PRC- Proportional Rate Control feature provides gentle smooth response Multi-Station capability with security station lock SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display NAV Mode provide adaptive precise track steering ALC – Automatic Leeway Compensation for Drift, Tide & Wind Fully compatible with onboard instruments and steering systems Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional) Auto Thrust-assist for Dead-ahead slow or station keeping (optional) Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more Standard Mounting bracket – Flush Mount, Swivel mount bracket is optional IP67 Waterproof – Control Head, TS4, NF4 and WS4 RoHS & CE compliance for EMI and RFI immunity Additional Features: 9 level backlit LCD display Colour head gives you Red Night Vision mode for comfortable viewing in all conditions Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats Multiple steering capability for Fast, Slow and Work modes Simple to use course knob with mechanical detent Multi-station capability with security station lock Automatic trim Adjustable yaw, turn rate and rudder settings PORT and STBD dodge buttons for collision avoidance Output for optional analog rudder angle indicator, up to 4 stations Fully compatible with onboard NMEA instruments and most steering systems Specifications: Operating Voltage: 10 to 30 VDC Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps Network: NMEA 2000 Navigational Interface: NMEA 0183 inputs NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec) Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass Course Resolution: 1° Course Detection: 0.5° Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display

Mounting Bracket with Knobs for TZT19F Display TZT3 TZT19F bracket with knobs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stainless Steel Mounting Bracket f/Side Mount Table Pedestal Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength. Features: Polished stainless steel pedestal & table support Anodized aluminum bracket Locking pull pin offers added mounting strength Removable 125° bent leg Dimensions: 4-7/8"W x 4"H x 1/2"D Screw: #10 flat head / 1/4" hole. Benefits: Eliminates the need for mounting holes in boat deck and/or cockpit Easy to remove when not in use, for clear passage and storage Quick set-up and removal in tight spaces Increased leg & foot room

P4 Color Pack - Magenetic Compass Sensor & Rotary Feedback for Commercial Boats *Deck Mount Bracket Optional Features: IST – Intelligent Steering Technology provides superior vessel steering capability ADAPTIVE steering for sea conditions and varying vessel speeds AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration WORK Mode suitable for Towboats and Workboats NMEA 2000, ETHERNET, and NMEA 0183 interface Configurable for Fishing, Offshore Vessels, Workboats, Towboats and Yachts PRC- Proportional Rate Control feature provides gentle smooth response Multi-Station capability with security station lock SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display NAV Mode provide adaptive precise track steering ALC – Automatic Leeway Compensation for Drift, Tide & Wind Fully compatible with onboard instruments and steering systems Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional) Auto Thrust-assist for Dead-ahead slow or station keeping (optional) Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more Standard Mounting bracket – Flush Mount, Swivel mount bracket is optional IP67 Waterproof – Control Head, TS4, NF4 and WS4 RoHS & CE compliance for EMI and RFI immunity Additional Features: 9 level backlit LCD display Colour head gives you Red Night Vision mode for comfortable viewing in all conditions Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats Multiple steering capability for Fast, Slow and Work modes Simple to use course knob with mechanical detent Multi-station capability with security station lock Automatic trim Adjustable yaw, turn rate and rudder settings PORT and STBD dodge buttons for collision avoidance Output for optional analog rudder angle indicator, up to 4 stations Fully compatible with onboard NMEA instruments and most steering systems Specifications: Operating Voltage: 10 to 30 VDC Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps Network: NMEA 2000 Navigational Interface: NMEA 0183 inputs NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec) Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass Course Resolution: 1° Course Detection: 0.5° Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display

Mounting Bracket Knobs for GP1971F Mounting Bracket Knobs specifically designed for Furuno's GP1971F. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Mounting Bracket for NavPilot 300 Mounting Bracket specifically designed for Furuno's NavPilot 300. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

P4 Color Pack - Fluxgate Compass & Rotary Feedback f/Yacht Boats *Deck Mount Bracket Optional Features: IST – Intelligent Steering Technology provides superior vessel steering capability ADAPTIVE steering for sea conditions and varying vessel speeds AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration NMEA 2000, ETHERNET, and NMEA 0183 interface Configurable for all types of recreational mid-size to large pleasure craft PRC- Proportional Rate Control feature provides gentle smooth response Multi-Station capability with security station lock SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display NAV Mode provide adaptive precise track steering ALC – Automatic Leeway Compensation for Drift, Tide & Wind Fully compatible with onboard instruments and steering systems Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional) Auto Thrust-assist for Dead-ahead slow or station keeping (optional) Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more Standard Mounting Bracket – Flush Mount, Swivel mount bracket is optional IP67 Waterproof – Control Head, TS4, NF4 and WS4 RoHS & CE compliance for EMI and RFI immunity Additional Features: 9 level backlit LCD display Color head gives you Red Night Vision mode for comfortable viewing in all conditions Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats Multiple steering capability for Fast, Slow and Work modes Simple to use course knob with mechanical detent Multi-station capability with security station lock Automatic trim Adjustable yaw, turn rate and rudder settings PORT and STBD dodge buttons for collision avoidance Output for optional analog rudder angle indicator, up to 4 stations Fully compatible with onboard NMEA instruments and most steering systems Specifications: Operating Voltage: 10 to 30 VDC Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps Network: NMEA 2000 Navigational Interface: NMEA 0183 inputs NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec) Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass Course Resolution: 1° Course Detection: 0.5° Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display

P4 Color Pack - Fluxgate Compass & Rotary Feedback f/Yacht Boats *Deck Mount Bracket Optional Features: IST – Intelligent Steering Technology provides superior vessel steering capability ADAPTIVE steering for sea conditions and varying vessel speeds AUTO-SETUP – allows auto-drive detection, rudder response time, compass detection and calibration NMEA 2000, ETHERNET, and NMEA 0183 interface Configurable for all types of recreational mid-size to large pleasure craft PRC- Proportional Rate Control feature provides gentle smooth response Multi-Station capability with security station lock SUNLIGHT viewable LED backlit 5.7” TFT LCD 640 x 480 display NAV Mode provide adaptive precise track steering ALC – Automatic Leeway Compensation for Drift, Tide & Wind Fully compatible with onboard instruments and steering systems Z-Drive interface allows 360 ͦAzimuth drive interface using +/- 10 Volts /4-20 milliamps analog signal (optional) Auto Thrust-assist for Dead-ahead slow or station keeping (optional) Multi-Language capability: English, Chinese, French, German, Norwegian, Spanish, Italian, Icelandic, and more Standard Mounting Bracket – Flush Mount, Swivel mount bracket is optional IP67 Waterproof – Control Head, TS4, NF4 and WS4 RoHS & CE compliance for EMI and RFI immunity Additional Features: 9 level backlit LCD display Color head gives you Red Night Vision mode for comfortable viewing in all conditions Pre-defined parameter sets for full or semi-displacement,planning hulls, stern drives and sailboats Multiple steering capability for Fast, Slow and Work modes Simple to use course knob with mechanical detent Multi-station capability with security station lock Automatic trim Adjustable yaw, turn rate and rudder settings PORT and STBD dodge buttons for collision avoidance Output for optional analog rudder angle indicator, up to 4 stations Fully compatible with onboard NMEA instruments and most steering systems Specifications: Operating Voltage: 10 to 30 VDC Power Consumption: Average 0.5 Amps, 3 Amps Peak (Lower consumption capability with low backlight setting) Drive Output: 20 Amps Network: NMEA 2000 Navigational Interface: NMEA 0183 inputs NMEA 0183 Output: Heading (10x per sec), Autopilot Status (1x per sec) Heading Reference: Fluxgate, Magnetic Compass, NMEA Compass or Heading Sensor GNSS compass Course Resolution: 1° Course Detection: 0.5° Control Head: Sunlight viewable high contrast LCD is 5.7” TFT LCD 640 x 480 VGA high resolution display

GP1971F Mounting Bracket Furuno's bracket mount is specifically for GP1971F 9" GPS, Chartplotter, and Fishfinder. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Table Top 1 Burner Butane Camping Stove - Grey On-the-go cooking just got a little easier with the Coleman tabletop portable butane gas camping stove, 1 burner, gray. With an ultra-portable design and included carry case, this stove is ready for any camping adventure and quickly sets up on any outdoor tabletop, supporting up to a 10-inch pan. Attach an 8.8 oz. Butane cylinder, light the automatic matchless ignition with the turn of a knob, and in no time, you're cooking with up to 7,650 BTUs of power for up to 1.25 hours. Wind baffles shield your flame from the wind, and a large stable base makes stirring easy. Use your stove for years to come thanks to an easy-to-clean, durable porcelain-coated grate, rust-proof aluminum burner, and made-to-last enameled steel exterior. Features: Instastart ignition for matchless lighting, 7,650 total BTUs of cooking power Fits up to a 10-inch pan Lasts up to 1.25 hours on high on one 8.8 oz. butane gas cylinder The adjustable burner gives precise temperature control, and a large base offers stability for easy stirring The durable porcelain-coated grate is easy to clean, and the aluminum burner is rust-proof after years of use Specifications: Features: Table Top Assembled Product Dimensions (L x W x H): 14.80" x 6.50" x 10.00"

Tilt & Swivel Lockable LED TV Wall Mount Bracket The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket is a unique bracket with a simple but very versatile design. The team at Majestic worked very closely with various Marine and RV manufacturers and customers to engineer a bracket that can be a simple wall bracket and yet give you the flexibility of some angular movement. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket does just that is easy to install, and has a lot of flexibility. The Majestic BKT100 Tilt and Swivel Lockable LED TV Wall Mount Bracket comes in Black and will fit all Majestic LED TV models 22" or less. It is designed for easy mounting and removal. Simply remove the securing locking screw and slide up to remove or slide down to install. This bracket is designed for both 75mm and 100mm Vesa mounting solutions. The Tilt and Swivel allow for the TV to be installed almost anywhere and with the wide viewing angles, you will always see the perfect picture. Features Distance to wall: 44mm Loading weight: 15kgs Max TV size range: 15-22" Adjustable angle: 15 degrees up/down & left/right

Solid Teak Pedestal Table Tops Oval - 18" x 30" x 1-1/8" Thick Solid teak table tops with finished, raised lip edge Mounts to standard pedestal table hardware Great lightweight, durable, portable table User can add 3-7/8" diameter drinkholder cutouts

Teak Round Table Top Round - 24" Diameter x 1-1/8" Thick Features: Solid teak table tops with finished, raised lip edge Mounts to standard pedestal table hardware Great lightweight, durable, portable table User can add 3-7/8" diameter drinkholder cutouts