|
Plastic Thru-Hull, Digital Depth and Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Thru-Hull
Depth and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
600.00 |
|
|
235DST-MSE Bronze Thru-Hull, Digital Depth, Speed & Temp Sensor - 7-Pin
Features:
200 Watts
235 kHz
Bronze Thru-Hull
Depth, Speed and Temperature (+/- 1°)
10-Meter Cable with 7-Pin Connector
Can be flush mounted on a hull with up to a 22° dead rise
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
534.54 |
|
|
Plastic Transom Mount, Digital Depth, Speed & Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Transom Mount
Depth, Speed and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
578.18 |
|
|
DST-810MSF Bronze Thru-Hull, Digital Depth, Speed, Temp Sensor, NMEA2000
Airmar B617V Housing Style Transducer
The DST-801MSF offers depth, speed, and temperature in a single, 51 mm (2”) fitting. Only one hole through the hull simplifies the installation — an attractive feature for boat builders and boat owners alike. Patented, speed-signal-processing and upgraded 5 Hz (5X per second) speed-through-water enhancements provide excellent paddlewheel accuracy below 5 knots (6 MPH) and smooth linear output at all vessel speeds. The transducer’s wide, fan-shaped, fore-aft beam is able to find bottom even when installed on steep deadrise hulls or heeling sailboats. You also get true water-temperature readings with the DST-810MSF's reliable temperature sensor.
The DST-810MSF features a new Wireless connectivity to Airmar's CAST App, allowing you to calibrate the sensor, add depth offsets, and more.
Features:
Depth, speed, and temperature in one compact bronze housing
Fast-response temperature sensor provides ±0.2°C (±0.1°F) accuracy
Weight: 1.6 kg (3.5 lb)
Acoustic Window: Urethane Hull
Deadrise: Up to 22°
Data Update Rate: 1 per second
Minimum Sounding Depth: 0.5 m (1.6’)
Maximum Sounding Depth: 70 m (230’)
Pressure Rating: 3 m (10’)
Pulse Rate: 20,000 p/nm* (5.6 Hz per knot)—*p/nm = pulses per nautical mile
Smart Sensor Supply Voltage at 100% Sound Power Output: 11.5 VDC to 25 VDC
Supply Current: 40 mA
Standard Cable Length: 6m
NMEA 2000® Load Equivalency Number (LEN): 4
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
453.34 |
|
|
Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor (7-Pin)
200 Watts
235 kHz
Bronze Thru-Hull
Depth and High-Precision Temperature ( + / - .02 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
752.72 |
|
|
Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin)
Features:
200 Watts
235 kHz
Bronze Thru-Hull with 7" Stem
Depth and High-Precision Temperature ( + / - .02 degree )
10-Meter Cable with 7-Pin Connector
Fairing Block and Installation Materials Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
883.63 |
|
|
Plastic Thru-Hull Speed and Temp Insert (6-Pin)
Plastic Thru-Hull Speed and Temperature Sensor
6-Pin Connector
9-Meter Cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
141.82 |
|
|
Bronze Thru-Hull Speed and Temp Sensor (6-Pin)
Bronze Thru-Hull Speed and Temperature Sensor
6-Pin Connector
9-Meter Cable
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
229.09 |
|
|
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12º
The bronze B60-12º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5mm (3/16") extending outside of the hull.
Features:
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Arrow on cap points toward keel when installed
Built-in temperature sensor
Boat Size: Up to 8M (25')
Bronze transducer housing
Specifications:
Weight: 1.4 kg (3 lb)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B60 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20º
The bronze B60-20º provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in, deadrise compensation. The resulting vertical beam gives excellent echo returns for more-accurate depth readings. The nearly-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Arrow on cap points toward keel when installed
Built-in temperature sensor
Boat Size: Up to 8 m (25')
Bronze transducer housing
Specifications:
Weight: 1.4 kg (3 lb)
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin
The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze transducer housing
Boat Size: 8M (25') and up
Specifications:
Weight: Bronze - 0.9 kg (2.0 lb)
Hull Deadrise: Up to 8°
Acoustic Window: Urethane
Hole Diameter: 51mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 0°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 12°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Elementâ„¢ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
B164 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin - 20°
Step up to a 1kW - Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.
Features:
1 kW power, 50/200 kHz multiple-ceramics
Engineered for center-console and trailered boats
Low-profile protrusion below the hull
No affect on your boats running performance
Interfaces to any 600W or 1 kW echosounder
Bronze transducer housing
Depth and fast-response water-temperature sensor
Boat Size: 8M to 11M (25' to 35')
Specifications:
Weight: 2.7 kg (6 lb)
Hull Deadrise: Up to 28°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1101.13 |
|
|
Plastic Thru-Hull Transducer, 600w (10-Pin)
600 Watts
50/200 kHz
46/10 degree Beam Angles
Plastic Thru-Hull
8-Meter Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
202.67 |
|