FX+4500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 13 to 16m (42 to 55 ft.) Code sail surface of 140m² maximum (1500ft²) (max 50m² / 538ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+4500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (optional SSH+4500 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB4500 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI4500 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 2.40 kg Sailboat Length (feet): 42'-55' Code Sail Area (m²): 140,00 Code Sail Area (ft²): 1500,00 Staysail Area (m²): 50,00 Staysail Area (ft²): 538,00 Safe Working Load (tons): 4,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 169,00mm Spliced Furling Line Ø: 10,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 4500 top-down thimble.

FX+2500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 12 to 14m (40 to 45 ft.) Code sail surface of 100m²/ 1076ft² maximum (max 30m² / 322ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+2500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (optional SSH+2500 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB2500 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end (FCI2500 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 1.68 kg Sailboat Length (feet): 40'-45' Code Sail Area (m²): 100,00 Code Sail Area (ft²): 1076,00 Staysail Area (m²): 30,00 Staysail Area (ft²): 322,00 Safe Working Load (tons): 2,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 149,00mm Spliced Furling Line Ø: 8,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 2500 top-down thimble.

FX+7000 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 16 to 20m (55 to 70 ft.) Code sail surface of 250m² maximum (2690ft²) (max 70m² / 753ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+7000 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+7000 solid sheave as an alternative) One shackle as the top swivel attachment (optional SB7000 2-to-1 block as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI7000 s-s thimbles and FRC s-s clamps are also available) Easy installation of the furling loop (s-s guide + drum notch), discover Facnor Special GRIP loops for an efficient rotation of the drum, and the removable fairleads TSL25/28 Specifications: Weight: 23.44 kg Sailboat Length (feet): 55'-70' Code Sail Area (m²): 250,00 Code Sail Area (ft²): 2690,00 Staysail Area (m²): 70,00 Staysail Area (ft²): 753,00 Safe Working Load (tons): 7,00 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 199,00mm Spliced Furling Line Ø: 10,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 7000 top-down thimble.

FX+1500 Flying Sail Furler with Ratchet Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 10 to 12m (30 to 40 ft.) Code sail surface of 60m²/ 646ft² maximum (max 20m² / 215ft² staysail) Ratchet option Start & Go included (working both clock or anti-clockwise) Unique captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+1500 Furler Includes: A ratchet in s/s duplex enabling a temporary stop when furling in and a self-locking both clockwise and anti-clockwise (Facnor patent) One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative) One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? optional—sliding inside the luff tape and fitted with a thimble on each end (FCI1500 s-s thimbles and FRC s-s clamps are also available) Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble Specifications: Weight: 0.98 kg Sailboat Length (feet): 30'-40' Code Sail Area (m²): 60,00 Code Sail Area (ft²): 646,00 Staysail Area (m²): 20,00 Staysail Area (ft²): 215,00 Safe Working Load (tons): 1,50 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: Included Continuous Line Drum Ø: 109,00mm Spliced Furling Line Ø: 8,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 1500 top-down thimble.

FX+0900 Flying Sail Furler Further to constructive technical exchanges with ocean racers, Facnor has developed for over 20 years a sophisticated range of Gennaker/Code Zero furlers: the FX+. These furlers are known to be light, easy to fit, and aesthetic. Also, this furler is reliable for cruising or racing. Features: Adapted to sailboat from 6 to 10.5m (20 to 30 ft.) Code sail surface of 30m²/ 322ft² maximum Captive quick-release pin Possible conversion for asymmetric Spinnaker Composite/carbon housing Maintenance-free units (sealed bearings) The Standard Kit of the FX+900 Furler Includes: One continuous line drum in anodized aluminum and CNC machined in a solid block, protected by a composite/carbon housing, low-profile drum One swivel also in anodized aluminum and CNC machined in a solid block, including a neoprene anti-impact cover with high-visibility marking One snap shackle as the bottom drum attachment (Optional SSH+900/1500 solid sheave as an alternative) One shackle as the top swivel attachment (optional FRX900/1500 2-to-1 friction ring as an alternative) Offers Comfort in Sail Handling, Reliability, and Easy Manipulation: Monoblock's conception of the mechanisms for more sturdiness and long-lasting Intuitive manipulation to connect the sail to the mechanisms thanks to a fitted-in, compact, and unique captive quick-release pin Bottom drive unit with a largely dimensioned diameter for strong torque and therefore more comfortable handling Is rotation transmitted through an anti-torsion luff rope? Optional—sliding inside the luff tape and fitted with a thimble on each end  Optimize the investment by converting the furlers for use with the asymmetric spinnaker; just add a FAST top-down thimble Specifications: Weight: 0.57 kg Sailboat Length (feet): 20'-30' Code Sail Area (m²): 30,00 Code Sail Area (ft²): 322,00 Staysail Area (m²): Not adapted to furl a staysail Staysail Area (ft²): Not adapted to furl a staysail Safe Working Load (tons): 0,90 Standard Top Swivel Attachment: Shackle Standard Bottom Drum Attachment: Snapshackle Ratchet Option: NOT available Continuous Line Drum Ø: 85,00mm Spliced Furling Line Ø: 6,00mm Warranty: 3 years *Optimize the investment by converting the furler for use with an asymmetric spinnaker; just add the FAST 900 top-down thimble.

FCI4500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 4500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 13-15

SSH+4500 Solid Sheave Block The SSH+ solid sheave is used to adjust the tack point. To sail closer to the wind even better, it is necessary to lower the sail tack. This will push forward the belly. Inversely, lift the tack, and the belly of the sail will go aft, and sailors will be able to sail further downwind. Features: Quick and safe fitting for a FX+ 4500 furler Quick release pin Smooth and quickly installed Installation as 3-to-1 or 2-to-1 Enables tightening from below the drum Possible fitting in the case of bowsprit Specifications: Weight: 0.29 kg

FAST 4500 Top-Down Swivel The Fast 4500 top-down swivel makes an easy furling solution for your asymmetric Spinnaker. Adapt the FX+ 4500 (19mm inner jaw width) Gennaker/Code sail furler with the Fast 4500 top-down swivel so an asymmetric spinnaker can be used. Features: Provides easy furling Top-down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (the mechanism is highly protected)                             Same features as FX+ mechanisms (tested, strong, and quick-release attachments) Specifications: Weight: 0.66 kg

FCI1500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 1500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 9-11mm

FCI2500 Thimble - Stainless Steel Using thimbles specifically designed for a flying sail furler prevents the wear of the mechanism jaw and pin and optimizes the transmission of rotation from the mechanism into the anti-torsion rope. Features: For FX+ 2500 furler For anti-torsion rope  Optimum transmission of rotation Mirror polished stainless steel Specifications: Rope Diameter: 11-13mm

Double Fairlead - 25mm Diameter Stanchion with Webbing - Velcro Stipe Features: Quick and easy installation and dismantling Thanks to the velcro stripe, the double fairlead can be installed easily and quickly on 25 mm stanchion It enables quick installation and use of the continuous line of your flying sail furler or spinnaker furler The dismantling is easy and enables you to store the whole set (fairlead and continuous line) In case the continuous line is already spliced, the fairlead can be opened to install the line This double fairlead has no moving parts and thus offers a greater lifespan and minimal maintenance Applications: Use of the continuous line of your flying sails furler or spinnaker furler Specifications: Materials: 316L stainless steel grade Weight: (lb) 0.397 / (g) 180 Diameter: (inch) 0.98" / (mm) 25 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

Single Articulated Fairlead for 25mm & 28mm Diameter Stanchion Features: Stainless steel  Applications: The perfect solution to deviate furling line of manual furlers or flying sail furlers with drum Specifications: Max line diameter: (inch) 25/32" / (mm) 20  Materials: 316L stainless steel grade Weight: (lb) 0.243 / (g) 110 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

Sterndrive System f/Mercruiser from 1994 & North American Volvo from 1997 w/9' Cable The heart of this pilot drive system is the remote drive. The drive unit is connected to the boat steering by a cable and connection kit. The remote drive system is ideal for the following three types of engine application: Stern drives also known as I/O drives or Z drives Outboard engines up to 150HP Inboard engines requiring traditional rudder steering Features: Low Cost Solution - No need to change to hydraulic steering Easy to Fit - Simple to install kits Discreet Installation - All components mounted out of sight Time Saving - Rudder feedback option mounts directly on drive Safe - Manual override without disengaging the autopilot Compatible with all major autopilot brand electronics - simple solutions for difficult installations

Tab-Tite™ Cradle f/8" Samsung Galaxy Tab A & S2 8.0 w/Case The RAM® Tab-Tite&$153; spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.25" to 11" Width: 5" to 5.88" Depth: 0.3" to 0.67" Features: Support cups are designed to offer access to ports and tablet functions Modular design makes upgrading to a new tablet simple and cost effective Dual-spring loaded tension provides secure support for your tablet Easy, quick release of your tablet for on-the-go applications Versatility of cradle allows for attachment to many RAM mounting solutions Lifetime warranty Made in U.S.A. Material: High Strength Composite Weight: 0.69 lbs.

Soft Snatch Block - 10mm Rope Size Available in 4 models, the collection of soft snatch blocks will quickly become an essential piece of kit: flying sail furling, Furler terminals, rigging deviation, and barber-haulers. Made from anodized aluminum, these are both lightweight and robust. The Dyneema loop ensures easy installation. They are easy to open and close too, thanks to the Velcro strip. Applications: Terminals for flying sail furlers 2/1 mainsail halyard Rigging deviation Barber-hauler Specifications: Materials -Anodized aluminium - Dyneema loop  Rope size -10mm Loop diameter - 5mm Working load (lb) 4400 Breaking load (lb) 8810 Weight (lb) 0.218 Dimensions: A (inch) 25/64" B (inch) 2 21/64" C (inch) 1 39/64" D diameter (inch) 13/64"