The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Triple Mount for a Radar Dome, Satellite Dome and light/camera, etc. Three Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Three marine electronics mounting platforms Powder coated aluminum Compatible with 4' Open Array Requires Vision Mounting Plate to install radar or sat dome antenna                                         36" Open Array Triple Mount Aft raked 30 degrees 36" tall

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Triple Mount for a Radar Dome, Satellite Dome and light/camera, etc. Three Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Three marine electronics mounting platforms Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 36" Sat Dome Triple Mount Aft raked 30 degrees 36" tall 3 mounting plates required

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Separately

28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.   Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.   Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Seperately

Light Arm for Open Array Radars Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

Wing Light Arm Receiver for Aft Angled Mounts Edson's 68640 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angled Mounts while providing two wings to mount adding space for GPS Antennas and other electronics.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Two marine electronics mounting platforms Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 18" Sat Dome Dual Mount Aft raked 30 degrees 18" tall

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Two marine electronics mounting platforms Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 24" Sat Dome Dual Mount Aft raked 30 degrees 24" tall

4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.  Durable Made from marine grade polymer Compatible Manufacturers: Furuno Garmin Koden Simrad Sitex

4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing for quick and easy hassle free installation.  Durable Made from marine grade polymer Compatible Manufacturers: Raymarine

1-1/4" Black Light Bar for Open Array Radar up to 4.5' - Must Pick LTB Top Seaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.

Vision Series Mounting Plate for Simrad HALO™ Open Array Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family. The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style. Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.