Professional 85MM (3-3/8") Rudder Angle Indicator for NMEA 0183 Specially designed to fit into the standard 85mm panel cut, the Professional Rudder Angle Indicator is developed to suit commercial applications thanks to the embedded NMEA 0183 transceiver - which makes it operable with most of the professional autopilots out in the field - and the large 270° dial scale and Red illumination which makes it well readable and accurate in the indication. It supports both 12V and 24V systems, and it is designed to resist the harshest environment thanks to its extended operating temperature from -30°C to +80°C and IPX7 protection class. Able to support the analogue 3-180 Ohm and 0-5V rudder sensors, the Professional Rudder Angle Indicator also repeats the rudder angle data via NMEA 0183 to multiple gauges connected in series to it. The embedded infrared (IR) pushbutton allows for a user-friendly fine tuning of the predefined calibration. Features: Designed for NMEA 0183 Easy programing and installation Technical Specifications: Operating Voltage - 8 to 32 V Protection Class - IP6K7 Illumination - Red LED Dial - Black w/graphics Pointer - Red Illuminated Lens - Plastic Double Lens (anti-reflective) Operating Temp. - -40°C to 115°C Connector - Molex MX150 - 12 pin In the Box: Gauge  Wire Harness Mounting Spinlock Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

ViewLine 52mm (2-1/16") Rudder Angle Indicator - 40° Port/Starboard The ViewLine rudder angle gauge for wheel-controlled yachts displays the current rudder position at all times. An important cockpit gauge for accident-free maneuvers in narrow waterways.  Features: 8 pole Tyco/Hirschmann bush housing  Operating voltage 8–32 V   Current consumption <150 mA • Anti-fog double lens  Front side protection rating IP67  52 installation diameter  50 mm installation depth *Sold as an Individual Piece This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MK5 Rudder Angle Indicator The Ruddermaster indicates at a glance how far the rudder is from a straight-ahead position. As the steering wheel is turned, the sending unit communicates the angle of the rudder to the calibration box. The calibration box transmits the rudder’s position to the meter. The Ruddermaster can be used both as a steering aid and to monitor auto pilot systems. Raritan offers several styles of meters for readout as well as some that are splash proof. Repeating units can also be installed should there be a need for a readout at a station and not the main control panel. Features: Ready for installation with all necessary components needed - meter, calibration box and sending unit Constant monitoring of rudder angle position from 0°-45° Great aid for docking or close maneuvering Each unit is assembled by hand, individually tested and backed by Raritan's 1-year Limited Warranty and legendary technical support team Repeater units are available for multiple station readouts Rudder Indicator with 4-1/2" flush mount panoramic meter WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Newport SS 2" Rudder Angle Indicator Gauge The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - Port to Starboard 2.06" (53 mm) Mounting hole Operating Voltage - 12/24 V In the box: Gauge Mounting Hardware Installation Manual Factory P/N GP8186 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Chesapeake Black  2" Rudder Angle Indicator Gauge Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N GP7377 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Euro Black 2" Rudder Angle Indicator Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens. 2" - Hole size: 2.0625" (53mm)  Specifications: Anti-scratch glass lens 12 VDC negative ground Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N GP7373 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Rudder Angle Sensor f/ Dual Station Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 1.5 - 90 Ohm Resistance value -  1.5 - 90 Ohm - 2 Gauges  Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - Black Dial & Bezel The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.   Only rudder instruments of the same diameter can be combined. Specifications: 8 and 14 pole Tyco / Hirschmann bush housing  Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading Anti-fog double lens Protection rating front IP67, rear IP52 85 mm installation diameter 50 mm installation depth  Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Analog Rudder Angle Indicator The analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a vessels rudder. All ComNav Autopilots come with built in electronics to drive at least three meters without additional interfacing. Features: Flush mount Water resistant front face Supply voltage for lighting 12-32VDC

Rudder Angle Indicator Watertight Case The Rudder Angle Indicator Watertight Case is a good alternative for outdoor applications where flush mounting the RAI may not be possible. In these cases or, when the back of the RAI may be exposed to moisture, we recommend the watertight case. The kit comes complete with case, O-ring seals, screws and two watertight cable glands.

Chesapeake White SS 2" Rudder Angle Indicator Gauge Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. 2"- Hole Size: 2.0625" (53mm) Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC Negative Ground Can be adapted for 24 VDC systems Factory P/N GP7378 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

3-3/8" (85MM) ViewLine Rudder Angle Indicator -45°/+45° - 8 to 32V - White Dial & Bezel The ViewLine rudder angle instrument for wheel-controlled yachts and pleasure boats displays the current rudder position at all times. This indicator makes it easier to navigate out of harbors or through locks.   Only rudder instruments of the same diameter can be combined. Specifications: 8 and 14 pole Tyco / Hirschmann bush housing  Operating voltage 8 – 32 V Accuracy +/- 2.5 % of full scale reading Anti-fog double lens Protection rating front IP67, rear IP52 85 mm installation diameter 50 mm installation depth  Operating temperature range -20 °C / +70 °C Reverse polarity protection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stand Alone Rudder Angle Indicator System Complete single station RAI system typically used on vessels that do not have a ComNav autopilot or, in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). The Stand Alone System consists of three components: ComNav Rudder Follower w/50' cable and linkage kit RAI Distribution Box w/special circuitry ComNav 3" Rudder Angle Indicator

Rudder Angle Sensor f/ Single Station  Technical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 3 - 180 Ohm Resistance value -  3 - 180 Ohm Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-3/8 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 2.3 GPM 8.7 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ      230V 50/60HZ   Type Centrifugal Mag Drive Inlet 3/8"OD Outlet 3/8"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet     Part # 0115-0064-0300