The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

RAM 3.68" Diameter Base w/Ball The (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 3.68" Diameter Base w/3-3/8" Ball Part #: RAM-E-202U The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder Coated Marine Grade Aluminum Ball Size: 3.38" Rubber Ball "E" Size

Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter. HARDWARE INCLUDED (2) 1/4"-20 U-Bolts for 1" - 1.25" Rails (4) 1/4"-20 Nylock Nuts (4) Rubber Caps CLAMP RANGE 1" - 1.25" diameter BALL SIZE D Size (2.25") WEIGHT CAPACITY Standard Use: 6 lbs Heavy-Duty Use: 5 lbs Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.86 lbs

RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A dapter The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 2.25" Clamping Range (Flat Surfaces): 0" to 2.2"

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & Round Base Adapter that contains the AMPs Hole Pattern Part #: RAM-B-149Z-202U The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.50" to 1.25" in diameter. The RAM marine grade aluminum base and ball contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

The RAM-D-201U-E powder coated marine grade aluminum LONG double socket arm allows for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 12.875" Socket-To-Socket Length: 11.1875" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Motorcycle Brake/Clutch Reservoir Base with (2 Quantity) 1" Balls The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" D-Size Ball Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.54 lbs.

2" x 5" Rectangle Base with 2.25" Ball The RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Weight: 0.69 lbs.

11" x 3" Rectangle Universal Electronics Base with 2.25" Ball The RAM-D-111BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Weight: 1.25 lbs. *Note: The "U" in the part number reflects product packaged in poly bag. This plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

2" x 3" Rectangle Base with 2.25" Ball Contains a 2.25" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base.

RAM Motorcycle Base w/9mm Hole & 1" Ball The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Double U-Bolt Base w/1" Ball f/Rails from 0.75" to 1.25" Diameter The RAM-B-235U consists of a double u-bolt base with 1" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.

RAM Mount M8 Handlebar Base w/Diamond Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up. Included: (1 QTY) 1" Rubber Ball (1 QTY) M8 x 55 bolt (1.25 thread pitch) (1 QTY) M8 x 60 bolt (1.25 thread pitch) (1 QTY) M8 x 65 bolt (1.25 thread pitch) (1 QTY) Standard B Size Arm (1 QTY) Diamond Base with Ball Material: Powder Coated Marine Grade Aluminum Attachment Point: Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt. Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.