Adjustable Tri-Ball Mount Adjustable Tri-Ball Ball Mount System w/Step, 2" Sq. Shank, 1-7/8" Ball 2,000 lbs (GTW), 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW) Features: Adjustable height - Perfect for towing multiple trailers of varying heights and couplers Height adjusts up to 10.5" Rated to 14k GTW 1-7/8" (2K rating) , 2" (10K GTW), and 2-5/16" (14K GTW) Hitch balls Fits 2" receivers and rated up to 14K GTW Cast shank, variable height capability Integrated hitch step with grip pattern Knurled bolt pins with secure lanyard Black powder coat finish WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Dual Ball Mount Adjustable Dual Ball Mount System, 2" Sq. Shank, 2" Ball 10,000 lbs. (GTW), 2-5/16" Ball 14,000 lbs. (GTW) Features: Adjustable height - Perfect for towing multiple trailers of varying heights and couplers Height adjusts up to 10.5" 2" (10K GTW) and 2-5/16" (14K GTW) Hitch balls Fits 2" receivers and rated up to 14K GTW Cast shank, variable height capability Knurled bolt pins with secure lanyard Black powder coat finish WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Draw-Tite Draw-Tite is the premier brand of custom trailer hitches. Draw-Tite provides top quality in every hitch and receiver made. Solid all-welded construction is used for maximum strength and safety. All Draw-tite hitches meet and exceed V-5 and SAE J684 standards and are inspected for quality and workmanship.

Receiver Lock 5/8" for 3" Square Class V Receivers Sleeved to 3/4' Dogbone Style The Draw Tite  5/8 In. diameter dogbone lock is primarily designed for towing for securing class V towing ball mounts that have a 3 In. sized receiver tube. Features: For use with 3 In. square shanks Class V Bright zinc finish 4 In. span Traditional flat key Always write down your key number Sleeve to 3/4 inch WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Towing Starter Kit - 2" Ball  Towing Starter Kit, w/Interlock® (Hex) Feature Ball Mount 2" Sq. x 8-1/2"L x 2"D x 3/4"R, 6000 lbs. & 2" Hitch Ball w/Lock, Plastic Storage Case Features:  Includes 2" hitch ball Includes receiver lock Black powder coat finish over A-Coat Fits 2" square receiver tube opening WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Interchangeable Hitch Ball w/ 1" Shank - 1-7/8", 2", 2-5/16" Balls Designed to accommodate towing multiple trailers with ease, Tow Ready Interchangeable Hitch Ball System allows you to change hitch ball sizes in seconds without any tools. Innovative quick release changes balls in seconds Rated capacities up to 8,000 lbs. Durable heat treated shank New positive latch design No special tools required WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Trailer Hitch Receiver Extension, 2" to 2" Extension, 8" Length - 3,500 lbs. Features: Ideal for slide-out campers with extended overhangs 2" square tube opening for use with ball mounts and hitch-mounted accessories WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Pintle Mount Features: Perfect for those towing multiple trailers of varying heights and couplers Height adjusts up to 10.5" Easy attach pintle mount Fits 2" receivers and rated up to 14K GTW Cast shank, variable height capability Knurled bolt pin with secure lanyard Black powder coat finish WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM® Tough-Claw™ with Ratchet Extension Arm & Double Ball Mount Get the length and stability needed to mount any tablet to a wheelchair for important use in the healthcare and rehab industries. The included Tough-Claw™ attaches to the wheelchair, securing the 8” Ratchet Extension Arm via the RAM ROD® Ratchet Attachment. With the extension, double socket arm, and round base all attached, choose a RAM tablet cradle – the Tab-Tite™, Tab-Lock™, EZ-Roll’r™ or 9”-10” / 11”-12” X-Grip® – to securely mount your device. Specifications: HARDWARE INCLUDED: Assembly Hardware CLAMP RANGE: .625" - 1.14" diameter SOCKET-TO-SOCKET LENGTH: Short Arm: 2.5" HOLE PATTERN: 4-Hole AMPS: 1.181" x 1.496" PLATE SIZE: 2.5" Diameter BALL/SOCKET SIZE: C Size (1.5") WEIGHT CAPACITY: Standard Use: 4 lbs/Heavy-Duty Use: 3 lbs MATERIALS: High strength composite PACKAGING TYPE: Poly Bag WEIGHT: 1.4 lbs.

D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The RAM-D-111U-C is Compatible With: Garmin Fishfinders and GPS Chartplotters Humminbird Fishfinders and GPS Chartplotters Lowrance Fishfinders and GPS Chartplotters Raymarine Fishfinders and GPS Chartplotters Overall Height: 8.125" Weight Capacity: Up to 15 lbs. Weight: 3.45 lbs. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber "D" Ball Size Hi-Torq™ Wrench The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.

RAM Single Arm Ball Mount Horizontal The RAM single swing and socket arm mount includes a 6" STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation. RAM Marine Electronic Mounts Page RAM-109HSB Dimensions A. Center of knob to center of ball socket: 6" B. Overall length of swing arm assembly: 10.75" C. Height from base to top of knob: 4.89" Part number reflects product packaged in clear clam shell for store shelf display. For additional specifications, see components and drawings tabs. Ball Size: 1.5 Inch Rubber Ball Material: Powder Coated Marine Grade Aluminum Color: Black Powder Coat

BOLT 1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V - 12" x 12"  Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates. Kits Include: (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000) (2) Stainless steel trim planes (tabs) and mounting plates (2) 20' wire harnesses with waterproof connectors (BAW2020) Features: Requires less than 6.5" of vertical transom space to install Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence Controls sold separately  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

912ED Electric - Edge Mount Limited Space Trim Tab Kits - 12V 9" x 12"  Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates. Kits Include: (2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000) (2) Stainless steel trim planes (tabs) and mounting plates (2) 20' wire harnesses with waterproof connectors (BAW2020) Features Include: Requires less than 6.5" of vertical transom space to install Superior seal design inspired by over 50 years of Bennett’s proven success in actuator manufacturing excellence Controls sold separately  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket Arm The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 3.0 lbs.

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole Pattern The RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.