|
lil' Fella Trolling Plate
Little brother to the Happy Troller®
Fits all outboard motors up to and including 25hp
Locks "down" for trolling, "up" for cruising
Made of highest quality polycarbonates with stainless steel hardware
|
75.00 |
|
|
Happy Troller - Small Plate
Small Troller: Fits outboard motors from 20 - 50hp
For the Fisherman who thinks he has everything!
Slows even big motors down to that "ever-so-slow" fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.
Locks in "down" position for trolling.
Locks in "up" position for cruising.
Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in "down" position
Acts as a stabilizer in "up" position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
|
127.50 |
|
|
Modular Top Plate for Flir M or Ray T Series Thermal Cameras
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
King Starboard
Made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
196.80 |
|
|
ADAF2 Black Modular Top Plate for FLIR M100 or M200 Series Cameras for Use with Mounts Ending in M1 or M2
This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one-piece design gives the top plate a nice clean look and is made from King Starboard.
|
192.00 |
|
|
Happy Troller - Large Plate
Large Troller: Fits inboard/outboards plus all outboard motors 50 hp and larger.
For the Fisherman who thinks he has everything!
Slows even big motors down to that "ever-so-slow" fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.
Locks in "down" position for trolling.
Locks in "up" position for cruising.
Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in "down" position
Acts as a stabilizer in "up" position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
|
142.50 |
|
|
WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°
Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Mounts between PowerTower® mount and base of radar.
Compatible with:
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - AS 21RD4KW, HB 2124 CHIRP radars
Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-12 radar
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A rugged, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine Grade Polymer
Dimensions (L x W ) - 11.10" x 9.09"
Angle - 4°
In the Box:
Wedge
Base seal
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
D Size 2.25" Ball on Round Plate with AMPS Hole Pattern
The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball "D" Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.6 lbs.
|
23.06 |
|
|
Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes
With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System.
Base mount sold separately.
|
142.20 |
|
|
Additional Wall Plate f/ARM101
An additional wall plate for the ARM101 so you can move the TV & ARM to a different location!
This wall/base plate is designed for the ARM101 so you can move the TV & ARM to a different location!
Note: It is recommended to remove the TV from the arm during off-road transit.
|
20.40 |
|
|
Adapter Plate f/200 x 100 VESA Conversion
The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200 x 100.
The Majestic AD200 is designed as an Adaptor plate for the end of a bracket with a VESA of 100x100, to fit to the back a flat screen TV with a VESA of 200x100.
IMPORTANT: You should only use an adaptor plate with a bracket that is rated to hold the size and weight of your TV. Especially if you intend on using a swing arm bracket.
The Majestic range of brackets have a VESA of up to 100x100. The AD200 acts as an adaptor plate which fits to the 100x100 VESA mount bracket, allowing you to use the 200x100 hole spacing to fit to the 200x100 VESA on the TV.
Majestic do not recommend fitting a 32" TV to a swing arm bracket when being used in the mobile environment. Majestic recommend pairing the AD200 with the BKT100 and will cover warranty on this combination.
|
20.40 |
|
|
ROKK Midi Top Plate f/Garmin and Raymarine
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-502 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (diameter) - 2.11" (53.8 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Raymarine, Lowrance and B & G
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-504 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 5.67" x 2.43" (144 x 61.75 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Humminbird and Raymarine
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-506 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 5.35" x 1.89" (136 x 48 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Garmin, Simrad and B & G
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-507 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 6.61" x 2.59" (168 x 65.7 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
APT-LB-GPS2-01 PowerTower® Center Mounted Light Bar and Wing Plate f/2 Antenna
Installs navigation light in the center and provides two (2) antenna mounts for maximum visibility and performance.
Compatible with:
Scanstrut aft leaning PowerTower® radar mounts
Features:
All mounting holes predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required
Cables run internally via a watertight seal
Technical Specifications:
Material - Aluminum
Height - 19.76" (502mm)
Mount Position - Center
In the Box:
Light bar
Instruction manual
*Sold as an Individual
|
239.63 |
|