|
Doel-Fin Stabilizer Fin - Black
Doel-Fin is the original hydrofoil developed by an aeronautical engineer to improve overall performance on all boats with outboard motors or outdrive units. Molded in two pieces of guaranteed unbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. The positive effects include greater stability, consistent planing at lower RPM, faster out-of-the hole performance, better gas mileage, steadier turns, higher top-end speeds and lower bow rise at all speeds. Doel-Fin is designed for use with small motors, big motors and inflatable dingies.
|
30.00 |
|
|
NavPilot 711C f/Outboards
Includes:
NavPilot 711C Control Unit
FAP7002 Processor Unit
PG700 Heading Sensor, NMEA 2000
Kick back, relax and let NavPilot steer you to your destination!
FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.
The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.
Self-learning and adaptive software
From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate.
SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering Control
The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot.
The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy.
SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.
If you are interested in utilizing the SAFE HELM and POWER ASSIST features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future.
FishHunter mode
FishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).
Furuno's new NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The Plug and Play CAN bus interface allows for easy installation and exceptional interface ability.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3041.75 |
|
|
Hydro-Stabilizer for Outboards & Stern Drives - 50 horsepower & Above
The Hydro-Stabilizer quickly puts your boat on a plane and helps pull skiers out of the hole faster. The wings also provide a smoother, more stable ride for you and your passengers; designed specifically for 50 HP outboard and stern drive engines.
Features:
Wings constructed of durable, molded black plastic
Includes all needed bolts and lock nuts for installation, in premium stainless steel
Out-performs ordinary flat hydrofoils by reducing drag when the hull goes on a plane
Effective even at lower RPMs for outboards and stern drives of 50 horsepower and above
|
27.59 |
|
|
Happy Troller - Small Plate
Small Troller: Fits outboard motors from 20 - 50hp
For the Fisherman who thinks he has everything!
Slows even big motors down to that "ever-so-slow" fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced.
Locks in "down" position for trolling.
Locks in "up" position for cruising.
Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in "down" position
Acts as a stabilizer in "up" position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
|
127.50 |
|
|
lil' Fella Trolling Plate
Little brother to the Happy Troller®
Fits all outboard motors up to and including 25hp
Locks "down" for trolling, "up" for cruising
Made of highest quality polycarbonates with stainless steel hardware
|
75.00 |
|
|
Hydro-Stabilizer Jr for Outboards Under 50 Horsepower
This Attwood Hydro-Stabilizer gives outboards under 50 horsepower a performance upgrade by enhancing their stability and handling. This Hydro-Stabilizer reduces drag when the hull gets on the plane. It quickly puts the boat on the plane and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on the plane, and its innovative wings provide a smoother, more stable ride.
Features:
It is made of durable black molded plastic, and reduces prop cavitation in turns
Comes with stainless steel bolts and lock nuts
Provides a performance upgrade by enhancing stability and handling
It can be installed on a wide variety of outboards under 50 horsepower
|
24.59 |
|
|
Universal Masthead Mount
Extend your WindTrak 10.Sport or WindTrak 15 vane away from masthead obstructions and turbulence. The 13" (33 cm) arm comes with hardware allowing side or top mounting and offset angles up to ±20 degrees. May be attached securely to flat, curved, vertical, horizontal, or inclined surfaces. Gain space aloft and improve mounting position of wind finders and other equipment. Mount on the back of the mast for easier viewing from the cockpit. The mount adapts to virtually every masthead situation.
Features:
Length 13" (33 cm)
Weight 3.2 oz (90 g)
Boom can be shortened if necessary; complete instructions included
Can be used with WindTrak Light #3200. Also accommodates Davis J-Base Mounts (using #10 stainless steel screws and nuts, not included)
|
37.50 |
|
|
The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8" maximum cylinder stroke.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
453.34 |
|
|
USB Power Cord f/Vantage Vue®, Vantage Pro2™ & Weather Envoy
For Use With:
Vantage Vue®
Vantage Pro2™
Weather Envoy
|
16.87 |
|
|
Hanging Mount System f/Standard Echomaster
Use the hanging mount system to suspend your Echomaster unit from a mast or rigging in the perfect "catch rain" position.
|
15.43 |
|
|
367 Universal Fishfinder Mount for Up to 9" Units
Features:
The Scotty Universal Sounder/Fishfinder Mount uses a new multi pattern universal top plate and the Scotty post mount design for quick removal and adjustable rotation
Simply fasten your sounder bracket to the top plate, then lock down the sounder mount into your favorite Scotty post mounting system
Only intended for use with Fishfinders and other marine electronics
|
23.64 |
|
|
Engine Mount Kit - 4 Engine Mounts f/Small Yanmar Engines (Yanmar*)
* Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series engines
The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull.
To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products.
R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain.
How To Select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine).
3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine).
4.Determine the stud necessary stud diameter and footprint of the mount.
5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range.
Example:
Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8".
Total weight is 590lbs.
590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010
590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037
Why R&D Marine Engine Mounts?
Designed for marine use, accepts propeller and engine thrust in both directions
Offers a fail safe design
R & D Marine Mounts are height adjustable
Pre-loaded to reduce movement
Slotted holes in base to assist in alignment
Mount types to fit all applications
|
615.00 |
|
|
Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount
Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable.
T-Bolt Dimensions:
.48" x .95"
Material:
High Strength Composite and Marine Grade Aluminum
Ball Size:
1" Rubber Ball Size
Note:
Part number reflects product packaged in a retail bag store shelf display.
|
34.94 |
|
|
Groco 500-D Toilet Seat/Cover, White
|
87.04 |
|
|
|
205.34 |
|